Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Fabrication of Fiber Bragg Gratings by Visible Femtosecond Laser for Multi-kW Fiber Oscillator

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Highly cascaded first-order sapphire optical fiber Bragg gratings fabricated by a femtosecond laser

Partially inscribed Bragg gratings suppressing high-order modes in high-power large-mode-area fiber oscillators

Narrow Linewidth Fiber Laser Oscillator Based on Fiber Bragg Grating with High Power Spectral Density

A Wideband Frequency-Tunable Optoelectronic Oscillator Based on a Narrowband Phase-Shifted FBG and Wavelength Tuning of Laser

2.19 kW narrow linewidth FBG-based MOPA configuration fiber laser.

High-Efficiency Inscription of Fiber Bragg Grating Array with High-Energy Nanosecond-Pulsed Laser Talbot Interferometer

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

Fabrication of cascaded wideband LPFGs by CO2 laser and Raman suppression in a 5 kW one-stage MOPA fiber laser

3 kW narrow linewidth high spectral density continuous wave fiber laser based on fiber Bragg grating

Raman suppression in high-power fiber oscillators by femtosecond-written chirped and tilted fiber Bragg gratings

Miniature Fabry-Perot Cavity Based on Fiber Bragg Gratings Fabricated by Fs Laser Micromachining Technique

Fabrication and Characterization of Femtosecond Laser Inscribed Long-Period Fiber Grating in Few-Mode Fiber

Micromachining & FBG fabrication using point by point technique utilizing femto-second laser

Dual-wavelength high-power Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating