Abstract:Precious metal catalysts with superior low-temperature activity and excellent thermal stability are highly needed in environmental catalysis field. In this work, a novel two-step incipient wetness impregnation (T-IWI) method was developed for the fabrication of a unique and highly stable CeO2/Al2O3 support (CA-T). Pd anchored on CA-T exhibited a much higher low-temperature catalytic activity and superior thermal stability in carbon monoxide (CO) and hydrocarbon (HC) oxidations, compared to Pd anchored on conventional CeO2/Al2O3 (CA), which was prepared by a one-step IWI method. After aging treatment at 800 °C, the CO oxidation rate on Pd/CA-T (1.69 mmol/(gPd s)) at 120 °C was 4.1 and 84.5 times of those on Pd/CA (0.41 mmol/(gPd s)) and Pd/Al2O3 (0.02 mmol/(gPd s)), respectively. It was revealed that the CA-T support with well-controlled small CeO2 particles (ca. 12 nm) possessed abundant defects for Pd anchoring, which created rich Pd-CeO2 interfaces with strengthened interaction between Pd and CeO2 where oxygen could be efficiently activated. This resulted in the significantly improved oxidation activity and thermal stability of Pd/CA-T catalysts. The T-IWI method developed herein can be applied as a universal approach to prepare highly stable metal oxide-alumina-based supports, which have broad application in environmental catalyst design, especially for automobile exhaust aftertreatment.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.1c00077?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.1c00077</a>.Catalyst characterization details, BET surface areas, CeO2 crystallite sizes, activity data, EXAFS fitting parameters, surface elemental compositions, XRD patterns, HAADF-STEM images, water contact angles, pore size distributions, XANES, Ce 3d and Pd 3d XPS, CO-TPR profiles, in situ DRIFTS, and OSC values (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.1c00077/suppl_file/es1c00077_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Hierarchical Fibrous Honeycomb Ceramics with High Load Capability and Low Light-Off Temperature for the Next-Generation Auto Emissions Standards.

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Cordierite Honeycomb Ceramics Used for Purification of Vehicle Exhaust

Effects of the internal structures of monolith ceramic substrates on thermal and hydraulic properties: additive manufacturing, numerical modelling and experimental testing

Robust and Well-Controlled TiO2-Al2O3 Binary Nanoarray-Integrated Ceramic Honeycomb for Efficient Propane Combustion

Photothermal Catalyst Engineering: Hydrogenation of Gaseous CO2 with High Activity and Tailored Selectivity

Fabrication of a novel catalyst reactor with improved strength and catalytic performance used for automotive exhaust treatment

Hierarchically Porous Alumina Ceramic Catalyst Carrier Prepared by Powder Bed Fusion

A preparation process of ceria based monolithic catalysts for automobile exhaust

A Humidity-Induced Nontemplating Route toward Hierarchical Porous Carbon Fiber Hybrid for Efficient Bifunctional Oxygen Catalysis.

Novel ceramic supports for catalyst with hierarchical pore structures fabricated via additive manufacturing-direct ink writing

Regulation Mechanism of the Specific Surface Area of Alumina Ceramic Carriers with Hierarchical Porosity Fabricated by Powder Bed Fusion

Hierarchical Ceramic Foams with 3D Interconnected Network Architecture for Superior High-Temperature Particulate Matter Capture

Highly Active and Stable Palladium Catalysts on Novel Ceria–Alumina Supports for Efficient Oxidation of Carbon Monoxide and Hydrocarbons

Integrating Pd-doped perovskite catalysts with ceramic hollow fibre substrate for efficient CO oxidation

A mesoporous catalytic fiber architecture decorated by exsolved nanoparticles for reversible solid oxide cells

Ultrastable PtCo/Co3O4-SiO2 Nanocomposite with Active Lattice Oxygen for Superior Catalytic Activity Toward CO Oxidation.

Pd-Co2P nanoparticles supported on N-doped biomass-based carbon microsheet with excellent catalytic performance for hydrogen evolution from formic acid

Robust catalyst 3D microarchitectures by digital light printing with ceramic particle–polymer composites

Hierarchically Porous Alumina Catalyst Carrier with Biomimetic Vein Structure Prepared by Direct Ink Writing