Abstract:DP980 is widely used in automotive bodies. In the present research, a numerical model was developed via the in-house finite element (FE) code JWRIAN-RSW for the multi-physics coupled process of resistance spot welding (RSW) of DP980 sheets and JWRIAN-Hybrid for residual stress. The high-temperature material properties and metallurgical behaviors of DP980 were clarified via experiment to ensure simulation accuracy. The measured thermal expansion curve indicated the austenite and martensite transformation in DP980 and clarified the critical temperatures. Material properties such as thermal expansion and stress-strain curves in heating and cooling processes were measured. The double-pulse electric current mode in RSW was employed and it was found that the molten zone disappeared temporarily between two current pulses. The final dimension of welding nugget was determined by the second pulse. The volume expansion of martensite transformation led to a clear stress drop (about 400MPa) in the welding nugget and heat-affected zone. The final value of X-stress and Y-stress on the center of surface was about 300MPa and 240MPa, respectively. Except for the solid-state phase transformation, the springback process also had a significant influence on residual stress, which cannot be ignored in numerical modeling. The predicted temperature field and residual stress distribution showed good agreement with the molten zone morphology and XRD measurements, which demonstrated the effectiveness of developed FE model.

Numerical Analysis of Residual Stress due to Surface Induction Hardening

A further study on representative models for calculating the residual stress based on the instrumented indentation technique

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Indentation model to obtain residual stress based on deviator stress equivalence and its application

Novel method for measuring surface residual stress using flat-ended cylindrical indentation

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Numerical simulations of strengthen induction heating with response surface methodology

Numerical Limit and Shakedown Analysis Method for Kinematic Hardening Structure Made of Arbitrary Inhomogeneous Material

An approach for obtaining surface residual stress based on indentation test and strain measurement

A novel model to obtain equi-biaxial residual stress of metallic materials via instrumented spherical indentation

Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously

Simulation Study of Cutting-Induced Residual Stress

Mathematical modelling of thermal stresses of induction surface hardening in axi-symmetric formulation

Three-dimensional Finite Element Analysis of Process-Induced Residual Stress in Resin Transfer Molding Process

Numerical Simulation for the Residual Stresses of Stellite Hard-Facing on Carbon Steel

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

A unified sharp indentation method for obtaining stress-strain relations, strength and Vickers hardness of ductile metallic materials

Determination of Residual Stress Distribution Combining Slot Milling Method and Finite Element Approach

Analytical model for measurement of through-thickness axisymmetric radial residual stress

Numerical modeling from process to residual stress induced in resistance spot welding of DP980 steel