Abstract:Ballast compaction and particle rearrangement cause ballast to rotate and move vertically and horizontally. Ballast movement, including translation and rotation, has a significant effect on track performance. Large movement of ballast particles leads to track geometry roughness, e.g., hanging ties, and thus increases potential of damage and deterioration to rails, ties and fastening components. This study investigated ballast particle movement at different locations beneath a crosstie. In the paper, a wireless device — “SmartRock” was utilized to monitor ballast movement under cyclic loading in laboratory tests. The SmartRock has a shape of a realistic ballast particle. Inside the SmartRock was imbedded a tri-axial accelerometer, tri-axial gyroscope, and tri-axial magnetometer with 9 degrees of freedom so that particle translation, rotation and orientation can be interpreted, relatively. The real-time measurements were recorded by the SmartRock and then sent to a computer via Bluetooth. In the laboratory tests, a ballast box was constructed. In the ballast box, a half section of a typical railroad track was constructed. Five hundred cyclic load repetitions were applied on the top of the rail. Translational and rotational accelerations of the particle were recorded by the “SmartRock”. Three ballast box tests were conducted. Two SmartRocks were placed beneath the middle of tie and the edge of tie, respectively but at different depths during each test — right under the tie, 12 cm beneath the tie and 25 cm beneath the tie. The results indicated that (1) ballast particles had translational as well as rotational modes under cyclic loading; (2) ballast particles had rotation together with horizontal translation; (3) particle rotation were higher beneath the edge of tie than those beneath the middle of tie; (4) Ballast movement were significantly reduced with depth. The paper also further confirmed that the SmartRock was capable of recording real-time translational and rotational accelerations, which would not have altered the motions of surrounding ballast particles due to its realistic shape of a particle, hence, provided a new means to monitor ballast particle movement in railroad engineering.

Ballast Fouling Identification Through Statistical Pattern Recognition Techniques on Ballast Particle Movement

Identification of Railroad Ballast Fouling Through Statistical Process Control on Ballast Particle Movement

Identification of ballast condition using SmartRock and pattern recognition

Characterization of Ballast Particle Movement at Mud Spot

Study on Ballast Particle Movement at Different Locations Beneath Crosstie Using “Smartrock”

Application of smartrock sensors in monitoring the motion of asphalt pavements aggregates and ballast particles: a comprehensive review

Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement

Laboratory Development and Testing of “smartrock” for Railroad Ballast Using Discrete Element Modeling

Identification of Ballast Fouling Status and Mechanized Cleaning Efficiency Using FDTD Method

Image-Aided Analysis of Ballast Particle Movement along a High-Speed Railway

Track Substructure Performance Monitoring Using Data Collected from Smartgrid

Degraded Ballast Stiffness Characterization Using Bender Element Field Sensor and PANDA® Penetrometer

On site fouling index assessment of ballasted layers using cone dynamic penetrometer and miniature borescope image analysis

Quantification of Railway Ballast Degradation by Abrasion Testing and Computer-Aided Morphology Analysis

Advanced Full-Scale Laboratory Dynamic Load Testing of a Ballasted High-Speed Railway Track

Ballast deterioration inspection and quantification with 3D form method based on particle inscribed ellipsoid

Effect of Geogrid on Railroad Ballast Studied by "Smartrock"

Analysis of the effect of shoulder cleaning on particle migration within ballast based on a coupled CFD-DEM approach

Application of a modern laser technique to evaluate the performance of recycled railway ballast

Fouling conditions and associated deformation characteristics of railway ballast

Ballast fouling inspection and quantification with ground penetrating radar (GPR)