Abstract:With increasing train speed and wheel axle load, severe vibrations can occur in a ballasted trackbed, thereby accelerating the degradation of the ballast particles and ultimately causing excessive settlement. To gain insights into the long-term trackbed behavior and the ballast degradation evolution, a full-scale ballasted track experiment with eight sleepers was designed and tested on a validated physical model test platform (ZJU-iHSRT). Sieving analysis together with computer-aided ballast morphology analysis were adopted to quantify the ballast degradation in terms of both the ballast particle size and morphological evolution, after every 100,000 train carriages. Various sensors were installed at key locations in the trackbed to record the dynamic stress responses, vibration velocities and deformations under train moving loads for up to 500,000 train carriages in total. The movements of individual particles inside the ballast layer were also captured using "SmartRock " wireless sensors. The dynamic soil stresses and vibration velocities in the trackbed all peaked at the locations underneath the rail seat and decayed with the distance away from the rail seat. Severe ballast degradation occurred in both particle sizes and morphological properties, with the ballast particles in the middle zone under the sleeper suffering a greater breakage due to the stronger confinement. The long-term train loads densified the ballast layer, both through particle rearrangement and particle breakage filling the voids in the ballast bed, resulting in a reduction in the stresses and vibrations. The amplitudes of the vertical stresses and the vibration velocities in the trackbed around the rail seat were reduced by over 25% and 38% respectively after 500,000 train loading carriages. The ballast particle shape became more compact after the test, with larger diameter and more Platy, Bladed and Elongate shapes found to be the more likely to degrade. Over 50% of the permanent settlement of the ballasted trackbed resulted from the ballast layer deformation, and the increase in the train speed intensified particle movements away from the sleeper in the lateral and longitudinal directions in the ballast layer and accelerated the development of the accumulated settlement, while the increase in the axle load caused the ballast breakage index (BBI) to rise dramatically by over 50% and contributed significantly to a greater settlement.

Identification of Railroad Ballast Fouling Through Statistical Process Control on Ballast Particle Movement

Ballast Fouling Identification Through Statistical Pattern Recognition Techniques on Ballast Particle Movement

Identification of ballast condition using SmartRock and pattern recognition

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Characterization of Ballast Particle Movement at Mud Spot

Study on Ballast Particle Movement at Different Locations Beneath Crosstie Using “Smartrock”

Application of smartrock sensors in monitoring the motion of asphalt pavements aggregates and ballast particles: a comprehensive review

Laboratory Development and Testing of “smartrock” for Railroad Ballast Using Discrete Element Modeling

Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement

Track Substructure Performance Monitoring Using Data Collected from Smartgrid

Image-Aided Analysis of Ballast Particle Movement along a High-Speed Railway

Identification of Ballast Fouling Status and Mechanized Cleaning Efficiency Using FDTD Method

Degraded Ballast Stiffness Characterization Using Bender Element Field Sensor and PANDA® Penetrometer

Advanced Full-Scale Laboratory Dynamic Load Testing of a Ballasted High-Speed Railway Track

AI-based technology to prognose and diagnose complex crack characteristics of railway concrete sleepers

Trackbed Settlement and Associated Ballast Degradation Due to Repeated Train Moving Loads

An Investigation of Rail Failure Due to Wear Using Statistical Pattern Recognition Techniques

Experimental Study of Static and Dynamic Loading Effects on Guided Wave-Based Intelligent Monitoring of Welded Rail Joints

Quantification of Railway Ballast Degradation by Abrasion Testing and Computer-Aided Morphology Analysis

Effect of Geogrid on Railroad Ballast Studied by "Smartrock"

Wireless Monitoring of Ballastless Track Slab Deformation for High-Speed Railway