Md Hamidur Rahman Md Habibullah Bhuyan Kimitoshi Hayano a Bangladesh Railway,Bridge Division,Dhaka,Bangladeshb Civil Engineering,University of Queensland,St Lucia,Brisbane,Queensland,Australiac Faculty of Urban Innovation,Yokohama National University,Yokohama,Japan
Abstract:Ballast is an essential component of the railway track substructure to facilitate load distribution and drainage. However, during service life, ballast loses its strength by reducing friction properties and gets fouled, which fails to perform as desired. Therefore, highly fouled ballast needs to be either cleaned or replaced to restore the expected load-bearing capacity, resiliency, track geometry, and drainage properties. Therefore, it is important to identify the intensity of ballast fouling and the characteristics of fouling materials along with their effect on the strength and deformation of the railway ballast. In this study, field investigation includes a collection of ballast samples from the live railway track of Bangladesh, and related tests are conducted. Based on the findings of the field identification, ballast samples on a scale of 1/5th are prepared in the laboratory with desired gradation and material properties to replicate the field samples. Compaction tests and a series of consolidated drained cyclic triaxial tests are conducted to identify the strength and deformation characteristics of the fouled ballast, considering the effect of water content. Based on the fouling index, four out of six samples are highly fouled, and the fouling materials contain both plastic and non-plastic properties. Triaxial test results indicate that consistency of the fouling material, degree of saturation, and deviator stress level significantly affect the strength and deformation characteristics of the fouled railway ballast. Fouling materials containing plastic properties increases the risk to the stability of the railway track in the presence of moisture.
What problem does this paper attempt to address?
The paper mainly discusses the problems caused by fouling of ballast beneath railway tracks. Ballast is an essential part of railway tracks responsible for load dispersion and drainage. However, during service life, ballast can become dirty due to fragmentation, surface infiltration, and subgrade intrusion, resulting in the loss of friction and strength, thus affecting its performance. Therefore, heavily polluted ballast needs to be cleaned or replaced to restore its load-bearing capacity, elasticity, track geometry, and drainage performance.
In the study, the authors collected ballast samples from railway tracks in Bangladesh through field investigations and conducted laboratory tests to assess the degree of pollution and characteristics of pollutants. They determined the severity of pollution for four samples based on a pollution index and found that the pollutants included plastic and non-plastic properties. The experiments indicated that the viscosity, saturation, and shear stress level of pollutants significantly affect the strength and deformation characteristics of polluted ballast. Pollutants with plastic properties increase the stability risk of railway tracks under wet conditions.
The paper also mentioned several sources of ballast pollution and four main pollution modes, and introduced methods for quantifying ballast pollution, including pollution index and relative ballast pollution ratio. Through on-site identification and laboratory experiments, the authors determined the particle size distribution and properties of polluted ballast and simulated laboratory-scale polluted ballast samples to study their compaction, strength, and deformation characteristics under different water contents.
In conclusion, this paper aims to understand the degree of ballast pollution, the characteristics of pollutants, and their impact on the stability and maintenance requirements of railway tracks, in order to propose more effective maintenance strategies.