Abstract:Due to the influence of coal rock shape, hardness, working environment and other factors in the cutting process of cantilever roadheader, the cutting head will produce irregular and violent vibration. As the rotary table of key stress components, its operation process stability, dynamic reliability and life affect the cutting efficiency and cutting stability of cantilever roadheader. In order to study the vibration characteristics of the rotary table in the cutting process, firstly, based on the theory of spatial force analysis and calculation, the spatial mechanical model of the rotary table of the cantilever roadheader is established. By solving the balance equation of the rotary table force system, the variation law of the load at the hinge ear of the rotary table with the cutting pitch angle and the horizontal angle is obtained. Secondly, based on the path transfer analysis method of working condition, the vibration data of cutting head, cutting cantilever, cutting lifting and rotary hydraulic cylinder under stable cutting condition are taken as input signals. By constructing the transfer path analysis model of rotary table working condition, the synthetic vibration of rotary table in cutting process is simulated, and the main vibration source of rotary table is determined. Then, the vibration contribution and contribution degree of each vibration excitation point to the hinge ear of rotary table are studied. By building a cutting test bench, the vibration response of rotary table in cutting process is tested to verify the correctness of the theoretical model.Thirdly, based on the frequency domain analysis method of random vibration fatigue life, combined with the S-N curve of the rotary table, the PSD curve at the maximum stress of the rotary table is obtained by modal excitation method, and the load data is imported into ANSYS nCode software to obtain the life cloud diagram and damage cloud diagram of the rotary table, and then the fatigue life of the rotary table under symmetrical cyclic load is solved. Finally, based on the response surface optimization analysis method, the maximum stress and maximum deformation of the rotary table are taken as the optimization objectives, and the aperture of each hinge ear of the rotary table is taken as the optimization variable. Based on Design Expert, a second-order regression model is established to realize the multi-objective optimization design of the key stress parts of the rotary table in the cutting process. The simulation results show that under the same cutting conditions, the maximum stress of the optimized rotary table is reduced by 15.82% year-on-year, and the maximum deformation is reduced by 24.70% year-on-year. The optimized rotary table structure can better adapt to the cutting process, which is beneficial to improve the service life of the rotary table and enhance its operation stability. The research results are beneficial to enrich the relevant research theory in the field of rotary table vibration of cantilever roadheader, and are beneficial to improve the service life of the rotary table and the efficiency of tunneling and mining.

Research on Optimization of a High Precision Hydrostatic Turntable

Design of a Novel Air Bearing Workbench for Rotary Ultrasonic Drilling of Advanced Ceramics

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Study on A Novel Adaptive Force Control Table Employed for Rotary Ultrasonic Drilling

Design and Optimization of the Surface Texture at the Hydrostatic Bearing and the Spindle for High Precision Machining

Structure Design Improvement and Stiffness Reinforcement of a Machine Tool through Topology Optimization Based on Machining Characteristics

Performance Analysis and Reliability Optimization of Internal Feedback Hydrostatic Rotary Table Support

Multi Objective Optimization Research on Power Consumption and Stiffness of Internal Feedback Hydrostatic Turntable

Hydrostatic Worktable Performance of an Ultra-precision Optical Aspheric Machine Tool

Dynamic Performance Analysis and Optimization for Inner Sleeve of Helical Milling Equipment Unit

Analysis and Optimization of an Internal Feedback Hydrostatic Turntable Oil Pad Power Consumption Based on Finite Difference Method

Development of ultra-precision centering and leveling turntable using aerostatic bearing technology

Design of a Hydrostatic Spindle and Its Simulation Analysis with the Application to a High Precision Internal Grinding Machine

Development of the large diameter high precision hydrostatic rotary table

Analysis of Mechanical Characteristics of the Swing Angle Milling Head of a Heavy Computer Numerical Control Milling Machine and Research on the Light Weight of a Gimbal

Performance Analysis and Restrictor Structure Improvement of an Internal Feedback Hydrostatic Turntable Oil Pad Considering Internal Flow

Effect of guide rail profile errors on the motion accuracy for a heavy-duty hydrostatic turntable

Modelling and Design Optimization of a Novel Compliant XY Positioner for Vibration-Assisted CNC Milling

Vibration source analysis and structural optimization design of rotary table based on OTPA