Abstract:Sb2Se3 is a promising emerging photovoltaic absorber, however the purpose of hole transport layers in devices is poorly understood. By directly comparing several organic hole transport layers in an otherwise identical device stack, we find they serve a dual purpose: i) to separate a defective Sb2Se3‐Au interface and therefore remove a barrier to hole extraction (top), and ii) to block pinholes and thereby improve uniformity of performance (bottom). Sb2Se3 is an emerging semiconductor which has shown promise for low‐cost photovoltaic applications. After successive record‐efficiencies using a range of device structures, spiro‐OMeTAD has emerged as the default hole transport material (HTM), however, the function of HTM layers remains poorly understood. Here, thin‐film Sb2Se3 solar cells are fabricated with which three organic HTM layers ‐ namely P3HT, PCDTBT, and spiro‐OMeTAD are investigated. By comparing these against one another, and to a reference device, their role in the device stack are clarified. These organic HTM layers are found to serve a dual purpose, increasing both the average and peak efficiency by simultaneously blocking pinholes and improving the band alignment at the back contact, with marginal differences in performance between the different HTMs. This produced a champion device of 7.44% using P3HT, resulting from an improvement in all performance parameters. A more complex processing route, run‐to‐run variability, and lower overall device performance compared to the other organics challenge the assumption that spiro‐OMeTAD is the optimal HTM for Sb2Se3 devices. A Schottky barrier at the Au‐Sb2Se3 contact despite the deep work function of gold implies Fermi level pinning due to a defective interface, which each of the organic HTMs are equally capable of alleviating.

9.7%-efficient Sb<sub>2</sub>(S,Se)<sub>3</sub> solar cells with a dithieno[3,2-<i>b</i>: 2′,3′-<i>d</i>]pyrrole-cored hole transporting material

9.7%-efficient Sb<sub>2</sub>(S,Se)<sub>3</sub> solar cells with a dithieno[3,2-<i>b</i>: 2,3-<i>d</i>]pyrrole-cored hole transporting material

9.6%-Efficient all-inorganic Sb 2 (S,Se) 3 solar cells with a MnS hole-transporting layer

9.6%-Efficient All-Inorganic Sb2(S,Se)3 Solar Cells with a MnS Hole-Transporting Layer

High-efficiency and stable Sb2(S,Se)3 thin film solar cells with phthalocyanine as a hole transport layer

7.5% n-i-p Sb2Se3 solar cells with CuSCN as hole-transport layer

Dopant-free hole-transporting materials for stable Sb2(S,Se)3 solar cells

A bithiophene-cored interfacial passivating layer for Sb2S3 solar cells with 7.1% efficiency

6.5% Certified Efficiency Sb2se3 Solar Cells Using Pbs Colloidal Quantum Dot Film As Hole-Transporting Layer

Interfacial engineering for high efficiency solution processed Sb2Se3 solar cells

Understanding the Role of Organic Hole Transport Layers on Pinhole Blocking and Performance Improvement in Sb2Se3 Solar Cells

Heteroatom Engineering of a Dibenzo[g,p]Chrysene‐Based Hole Transporting Material Provides High‐Performance Perovskite Solar Cells

Dithieno[3,2-b:2′,3′-d]pyrrole-based hole transport materials for perovskite solar cells with efficiencies over 18%

Molecular design of dibenzo[g,p]chrysene-based hole-transporting materials for perovskite solar cells: A theoretical study

Low-cost and Efficient Hole Transport Materials Based on 9-Phenyl-9h-car-bazole Branch for Perovskite Solar Cells

Bifacial and Semitransparent Sb2(S,Se)3 Solar Cells for Single‐Junction and Tandem Photovoltaic Applications

Perovskite Quantum Dots Exhibiting Strong Hole Extraction Capability for Efficient Inorganic Thin Film Solar Cells

A High-Efficiency Solid-State Dye-Sensitized Solar Cell with P3HT Polymer As a Hole Conductor and an Assistant Sensitizer

Full-inorganic Sb2(S,Se)3 solar cells using carbon as both hole selection material and electrode

Sb2S3-based bulk/nano planar heterojunction film solar cells with graphene/polymer composite layer as hole extracting interface

Dibenzothiophene S, S-Dioxide-Containing Dipolar Molecules As Efficient Hole-Transport Materials for p-i-n Perovskite Solar Cells