Abstract:A novel sequential chemical bath deposition (CBD) strategy is designed to regulate Sb2(S,Se)3 film profiles. The Se+S strategy produced Se‐rich Sb2(S,Se)3 thin films with good crystal orientation, favorable band alignment, and low defect density, resulting in solar cells with a record efficiency of 9.29% for the CBD‐manufactured Sb2(S,Se)3 devices. Recently, solution‐processed antimony sulfoselenide (Sb2(S,Se)3) thin films and solar cells have gained popularity and achieved impressive results. One of the most effective improvements is the chemical bath deposition (CBD) approach, which is gentle, highly adjustable, and scalable. However, development in alloyed Sb2(S,Se)3 using this process has been modest, with a power conversion efficiency (PCE) of roughly 8%. In this work, a sequential CBD deposition strategy is designed, introducing sulfur (S) or selenium (Se) sources at different stages of the CBD process to achieve high‐quality Sb2(S,Se)3 thin films and devices. Impressively, adding a moderate amount of sodium thiosulfate and thioacetamide as mixed sulfur sources during the CBD deposition of Sb2Se3 can produce Se‐rich Sb2(S,Se)3 films with high crystallinity, suitable bandgaps, low defect density, and favorable energy level alignment. With a short‐circuit current density (JSC) of 26.80 mA cm−2 and a fill factor (FF) of 65.89%, the solar cells with the FTO/CdS/Sb2(S,Se)3/Spiro‐OMeTAD/Au structure obtained an impressive PCE of 9.29%, the highest to date for Sb2(S,Se)3 solar cells manufactured with the CBD process. This study provides a feasible approach for enhancing the performance of CBD‐produced Sb2(S,Se)3 solar cells and offers new insights and techniques for the synthesis of other complex multicomponent thin films.

9.7%-efficient Sb<sub>2</sub>(S,Se)<sub>3</sub> solar cells with a dithieno[3,2-<i>b</i>: 2,3-<i>d</i>]pyrrole-cored hole transporting material

High-efficiency and stable Sb2(S,Se)3 thin film solar cells with phthalocyanine as a hole transport layer

Fabricating High‐Efficiency Sb2(S,Se)3 Solar Cells by Novel Additive‐Assisted Longitudinal Component Engineering

9.6%-Efficient all-inorganic Sb 2 (S,Se) 3 solar cells with a MnS hole-transporting layer

A bithiophene-cored interfacial passivating layer for Sb2S3 solar cells with 7.1% efficiency

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

Confined‐space selenium assisted tellurization post‐treatment strategy for efficient full‐inorganic Sb2S3 thin film solar cells

Stable and efficient Sb2Se3 solar cells with solution-processed NiOx hole-transport layer

An Optimization Path for Sb2(S,Se)3 Solar Cells to Achieve an Efficiency Exceeding 20

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

Solution‐Processed Sb2(S, Se)3 Seeds‐Assisted Sb2Se3 Thin Film Growth for High Efficiency Solar Cell

Enhanced photovoltaic performance of solution-processed Sb2Se3 thin film solar cells by optimizing device structure

Selenium‐Rich Sb2(S,Se)3 Thin Films Deposited via Sequential Chemical Bath Deposition for High‐Efficiency Solar Cells

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

Perovskite Quantum Dots Exhibiting Strong Hole Extraction Capability for Efficient Inorganic Thin Film Solar Cells

10 Years of Sb 2 Se 3 Thin Film Solar Cells

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb 2 (S,Se) 3 Solar Cells with 10.7% Efficiency

Tellurium Doping Inducing Defect Passivation for Highly Effective Antimony Selenide Thin Film Solar Cell

Achievable efficiency improvement of Sb2Se3 thin-film solar cells through interface engineering