Abstract:Sb2Se3 has a high absorption coefficient of 105 cm-1 in the visible light range, which is an excellent absorber layer material. Currently, a better band alignment between conventional CdS and Sb2Se3 has led to the widespread adoption of CdS as the electron transport layer (ETL) in Sb2Se3 solar cells. However, CdS is toxic, necessitating the exploration of alternative ETL materials that are eco-friendly and possess an appropriate energy band with Sb2Se3. In this study, we endeavor to pioneer an all-inorganic, green solar cell structure of Au/MoS2/ Sb2Se3/WS2/ITO by employing MoS2 as the hole transport layer (HTL) and WS2 as the ETL. We primarily optimized Sb2Se3 thickness and its hole doping concentration (NA) by SCAPS-1D numerical simulation. Based on the analysis of built-in electric field and carrier recombination rate along Sb2Se3, the optimal thickness and NA ranges of Sb2Se3 are determined, which are 0.9-1.1 mu m and 1016-1018 cm- 3 respectively. Through a series of optimization, the structure achieves the highest power conversion efficiency (PCE) of about 25.3 % in the current simulation of Sb2Se3 solar cells. After comparing the novel WS2 ETL with the conventional CdS ETL, we find that WS2 has a larger built-in potential (Vbi) and charge recombination resistance (Rrec). In addition, from the analysis of energy band structure, the spike-like band at Sb2Se3/WS2 interface can effectively inhibit the carrier recombination, which makes the device obtain a larger open circuit voltage (VOC) of 0.69 V. This study can provide theoretical reference for the development of non-toxic and efficient Sb2Se3 solar cells.

7.5% n-i-p Sb2Se3 solar cells with CuSCN as hole-transport layer

7.5% n–i–p Sb<sub>2</sub>Se<sub>3</sub> solar cells with CuSCN as a hole-transport layer

CZTS nanoparticles as an effective hole-transport layer for Sb2Se3 thin-film solar cells

All-Inorganic Hydrothermally Processed Semitransparent Sb 2 S 3 Solar Cells with CuSCN as the Hole Transport Layer

6.5% Certified Efficiency Sb2se3 Solar Cells Using Pbs Colloidal Quantum Dot Film As Hole-Transporting Layer

Efficient All-Inorganic Sb<sub>2</sub>S<sub>3</sub> Solar Cells with Matched Energy Levels Using Sb<sub>2</sub>Se<sub>3</sub> as Hole Transport Layers

Realizing Efficient and Stable n-i-p Perovskite Solar Cells with CuSCN Hole Transporting Materials via LiSCN Doping and Interface Modulation

Stable and efficient Sb2Se3 solar cells with solution-processed NiOx hole-transport layer

Stable and Efficient CdS/Sb2Se3 Solar Cells Prepared by Scalable Close Space Sublimation

9.6%-Efficient all-inorganic Sb 2 (S,Se) 3 solar cells with a MnS hole-transporting layer

Regulating the P-N Interface Quality for Sb2Se3-based Quasi-Homojunction Thin Film Solar Cells by an Effective Two-Step Heat Treatment Process

High-efficiency and stable Sb2(S,Se)3 thin film solar cells with phthalocyanine as a hole transport layer

9.6%-Efficient All-Inorganic Sb2(S,Se)3 Solar Cells with a MnS Hole-Transporting Layer

Defect-level Trap Optimization in Cu2ZnSn(S,Se)4 Photovoltaic Materials Via Sb3+-doping for over 13% Efficiency Solar Cells

Heterojunction Interface Engineering of C60 Electron Transport Layer Insertion Enables Efficient Cd-Free Sb2se3 Solar Cells

Back Contact Interfacial Modification in Highly-Efficient All-Inorganic Planar N-I-p Sb2Se3 Solar Cells.

High-Efficient Sb2se3 Solar Cell Using Znxcd1-Xs N-Type Layer

Analysis and Design of 25.3% Efficient Sb2Se3 Solar Cells by Numerical Simulation

Fundamental Physical Characterization of Sb2Se3-Based Quasi-Homojunction Thin Film Solar Cells

Enhancement in the efficiency of Sb2(S,Se)3 thin-film solar cells with Spin-coating NiOx as the hole transport layer

CuSx Hole Transport Layer for PbS Quantum Dot Solar Cell