Abstract:Light olefins are mainly made from petrochemical industry. These short-chain hydrocarbons including ethylene and propylene are traditionally produced by steam cracking of naphtha or as byproducts of oil refining processes. Fischer−Tropsch synthesis obtains long-chain hydrocarbons from syngas (a mixture of H2 and CO). A promising process to produce lower olefins from synthesis gas is so-called FTO process. A variety of catalysts have been explored for FTO reaction. Unsupported iron oxide catalysts have been investigated, and in some cases they have exhibited high selectivity towards lower olefins when the iron was modified by the addition of promoters. However, the bulk catalysts are mechanically unstable when the reaction is performed at high temperature, which would swiches product selectivity to higher hydrocarbons. Under these conditions, the undesirable boundouard reaction 2CO(g)→C(s) + CO2(g), leads to the deposition of carbon. The poor mechanical stability of the bulk catalysts may lead to plugging of the catalyst bed in fixed-bed operation or to fouling of the separation equipment in a fluidized bed process. To overcome the low activity and stability problems, the use of supported iron catalyzts have been explored. The FTO reaction is a structure sensitive reaction. The catalytic performance is strongly related to the particle size of the metal or active phase. The addition of support changed the morphology of the catalyst and affects the particles size and dispersion. Iron forms mixed oxides when supported on alumina or silica which are difficult to reduce, and the formation of the active iron carbide phase is hindered. The MgO supported catalyst shown a more dispersion of the particles and also has shown lower particles adhesion, consequently shown a better catalytic performance. In the case of CNF supported catalysts, iron loading is directly related to particle size, thus higher iron contents result in larger iron-containing particles. The iron nanoparticles supported on CNF have narrow size distributions and they are homogeneously distributed on the support . In order to optimize the support of FTO catalysts, MgO modified Al2O3 supports have been studied in this research.

Hydrogenation of CO to olefins over a supported iron catalyst on MgAl<sub>2</sub>O<sub>4</sub> spinel: effects of the spinel synthesis method

Hydrogenation of CO to olefins over a supported iron catalyst on MgAl2O4 spinel: effects of the spinel synthesis method

Effective Iron Catalysts Supported on Mixed MgO-Al<sub>2</sub>O<sub>3</sub> for Fischer-Tropsch Synthesis to Olefins

MgO modification of Fe-based Al2O3 catalysts for the coversion of syngas to light olefins

Syngas-derived Olefins over Iron-Based Catalysts: Effects of Basic Properties of MgO Nanocrystals

Effect of a Carbon Promoter on the Properties of a Co/MgAlO4 Catalyst for Fischer–Tropsch Synthesis

Spinel Nanostructures for the Hydrogenation of CO2 to Methanol and Hydrocarbon Chemicals

Ternary Fe–Zn–Al Spinel Catalyst for CO2 Hydrogenation to Linear Α-Olefins: Synergy Effects Between Al and Zn

Synergistic Catalysis of Al and Zn Sites of Spinel ZnAl2O4 Catalyst for CO Hydrogenation to Methanol and Dimethyl Ether

Hydrogenation Of Carbon Monoxide To Light Olefins On Iron Catalysts Promoted With Zirconia

Superparamagnetic Iron Oxide Nanoparticles on ZrO2 as Catalysts for CO2 Hydrogenation to Lower Olefins

Effects of the Different Supports on the Activity and Selectivity of Iron-Cobalt Bimetallic Catalyst for Fischer-Tropsch Synthesis

CO 2 hydrogenation to olefins on supported iron catalysts: Effects of support properties on carbon-containing species and product distribution

Regulating Iron Species Compositions by Fe-Al Interaction in CO2 Hydrogenation

The Effect of Copper Addition on the Activity and Stability of Iron-Based CO2 Hydrogenation Catalysts

Effect of CO 2 Co-Feeding on the Stabilization of Atomically Dispersed Iron Species over MgAl 2 O 4 During Ethane Dehydrogenation Reactions

The Influence of the Hydrogen Reduction on the Structure and Catalytic Activity of CoAl_2O_4 Spinel Catalysts

Topotactic Transformation of Metal–Organic Frameworks to Iron-based Catalysts for the Direct Hydrogenation of CO2 to Olefins

CO2 Hydrogenation on Carbides Formed in situ on Carbon-Supported Iron-Based Catalysts in High-Density Supercritical Medium

Mesoporous Manganese-Cobalt Oxide Spinel Catalysts for CO2 Hydrogenation to Methanol

Spinel-structure catalyst catalyzing CO 2 hydrogenation to full spectrum alkenes with an ultra-high yield.