In situ growth of Fe and Nb co-doped β-Ni(OH)2 nanosheet arrays on nickel foam for an efficient oxygen evolution reaction

Junjie Pan,Shaoyun Hao,Xingwang Zhang,Rongxin Huang

DOI: https://doi.org/10.1039/d0qi00614a

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:Fe, Nb co-doped β-Ni(OH)2 electrode exhibited excellent OER performance with an overpotential of 294 mV at 100 mA cm−2.

What problem does this paper attempt to address?

In Situ Growth of Fe and Nb Co-Doped Β-Ni(oh)2 Nanosheet Arrays on Nickel Foam for an Efficient Oxygen Evolution Reaction

Junjie Pan,Shaoyun Hao,Xingwang Zhang,Rongxin Huang

DOI: https://doi.org/10.1039/d0qi00614a

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:Fe, Nb co-doped β-Ni(OH)2 electrode exhibited excellent OER performance with an overpotential of 294 mV at 100 mA cm−2.
High-Density NiMnFe Hydroxide Nanoparticle-Nanosheet Arrays for Industrial-Level Electrochemical Oxygen Evolution Reaction

Jie Zhu,Feng Lin,Yuelan Zhang,Jianghao Wang,Jie Fu,Pingkai Ouyang

DOI: https://doi.org/10.1002/slct.202203943

2022-01-01

ChemistrySelect

Abstract:Oxygen evolution reaction (OER) plays key roles in the energy efficiency of electro-catalytic systems. However, the sluggish kinetics and accumulated gas slugs under the industrial operation condition limit the application of OER. Herein, Mn, Fe co-doped nickel hydroxide with highly dense nano-sheets array is obtained through a simple and mild two-step etching strategy, which exhibits a remarkable OER performance. Doping Mn and Fe can modulate the electronic structure and redox behavior of active site, leading to an excellent intrinsic activity toward OER. Moreover, highly dense nanoparticle-nanosheet array structure is conducive to provide more active sites and inhibit the accumulation of gas slugs under industrial current density. Thus, the obtained catalyst provides an impressing current density of 1.8 A cm(-2) at a small overpotential of 370 mV and sustains the performance more than 100 h.
High-Density NiMnFe Hydroxide Hierarchical Nano-arrays for Industrial-level Electro-chemical Oxygen Evolution Reaction

Jie Zhu,Feng Lin,Yuelan Zhang,Jianghao Wang,jie Fu

DOI: https://doi.org/10.22541/au.165798737.77483212/v1

2022-01-01

Abstract:Oxygen evolution reaction (OER) play a key role in the energy efficiency of electro-catalytic systems. However, the sluggish kinetics and accumulated gas slugs under the industrial operation condition limit the application of OER. Herein, Mn, Fe co-doped nickel hydroxide with highly dense hierarchical nano-sheets array is obtained through a simple and mild two-step etching strategy, which exhibits a remarkable OER performance. Doping Mn and Fe can modulate the electronic structure and redox behavior of active site, leading to an excellent intrinsic activity toward OER. Moreover, highly dense hierarchical array structure is conducive to provide more active sites and inhibit the accumulation of gas slugs under industrial current density. Thus, the obtained catalyst provides an impressing current density of 1.8 A cm−2 at a small overpotential of 370 mV and sustains the performance more than 100 h.
Composition-Balanced Bi-Metallic MOFs Directly Grown on Nickel Foam for High-Efficiency Oxygen Evolution Reaction

Shangkun Deng,Ziliang Li,Kang Xu,Zhu Liu,Zhuangzhuang Yin,Hai Yu,Jianguo Lv,Lei Yang,Zhaoqi Sun,Miao Zhang

DOI: https://doi.org/10.1149/1945-7111/ac18e6

IF: 3.9

2021-01-01

Journal of The Electrochemical Society

Abstract:In this paper, the electrocatalytic efficiency of bi-metallic organic framework compounds grown on nickel foam (NF) has been enhanced by adjusting the amount of iron and cobalt precursors. A unique wedge-like morphology was observed in Fe-1-Co-1-MOF. The optimized Fe-1-Co-1-MOF (1:1 of molar ratio of iron to cobalt) exhibits superior catalytic activity to oxygen evolution reaction (OER) performance with a lowest overpotential of only 233 mV at a current density of 10 mA.cm(-2) and the higher current density of 400 mA.cm(-2) can be provided at overpotential of 264 mV. The Tafel slope in alkaline aqueous solutions was 24.4 mV.dec(-1). After 10 h of continuous operation, the catalyst showed only a slight loss of current density at 50 mA.cm(-2). This success may be attributed to synergy between the bi-metallic organic framework catalyst and the large pores of conductive nickel foam, as well as the synergistic effect between the two phases molecules of the bi-metallic organic framework metal. (C) 2021 The Author(s). Published on behalf of The Electrochemical Society by IOP Publishing Limited.
Three-Dimensional Ni Foam-Supported CoO Nanoparticles/N-Doped Carbon Multilayer Nanocomposite Electrode for Oxygen Evolution

Yixiang Pan,Xiaoyan Wang,Jianguo Lu,Qing Yan,Weiyong Yuan,Chang Ming Li

DOI: https://doi.org/10.1021/acsanm.0c02496

IF: 6.14

2020-01-01

ACS Applied Nano Materials

Abstract:Metal-organic complex (MOC) multilayers are, for the first time, conformally constructed on Ni foam (NF) via a three-component sequential layer-by-layer (LbL) self-assembly approach and converted to three-dimensional (3-D) NF-supported interconnected CoO nanoparticles (NPs)/N-doped carbon nanohybrid multilayers via calcination. The obtained nanoarchitecture delivers an overpotential of 318 mV to achieve 10 mA cm(-2) and a Tafel slope of 46.1 mV dec(-1). This activity is superior to most reported oxygen evolution reaction (OER) catalysts, and even much better than those of Ir- and Ru-based ones measured under the same conditions (0.1 M KOH). Additionally, this electrode undergoes negligible potential and current change after 19.8 h chronopotentiometric measurement and 300 cyclic voltammetry cycles. The outstanding catalytic performance is mainly attributed to the ultrasmall and high-density CoO NPs embedded in Ndoped carbon uniformly assembled on the 3-D substrate significantly increasing electrochemically accessible active sites and durability and the N-doped carbon greatly promoting intrinsic activity of CoO. This work not only creates 3-D highly tunable networked nanostructured electrodes with excellent durability for high-efficiency electrocatalysis but also develops a facile, economical, and extremely versatile strategy to controllably self-assemble conformal MOC-based multilayers with multifunctionality and superior performance on essentially any substrate at the molecular level for broad applications.
Nanoarchitectonics of Fe-Doped Ni3S2 Arrays on Ni Foam from MOF Precursors for Promoted Oxygen Evolution Reaction Activity

Jingchao Zhang,Yingping Bu,Zhuoyan Li,Ting Yang,Naihui Zhao,Guanghui Wu,Fujing Zhao,Renchun Zhang,Daojun Zhang

DOI: https://doi.org/10.3390/nano14171445

2024-09-04

Abstract:Oxygen evolution reaction (OER) is a critical half-reaction in electrochemical overall water splitting and metal-air battery fields; however, the exploitation of the high activity of non-noble metal electrocatalysts to promote the intrinsic slow kinetics of OER is a vital and urgent research topic. Herein, Fe-doped Ni3S2 arrays were derived from MOF precursors and directly grown on nickel foam via the traditional solvothermal way. The arrays integrated into nickel foam can be used as self-supported electrodes directly without any adhesive. Due to the synergistic effect of Fe and Ni elements in the Ni3S2 structure, the optimized Fe2.3%-Ni3S2/NF electrode delivers excellent OER activity in an alkaline medium. The optimized electrode only requires a small overpotential of 233 mV to reach the current density of 10 mA cm-2, and the catalytic activity of the electrode can surpass several related electrodes reported in the literature. In addition, the long-term stability of the Fe2.3%-Ni3S2/NF electrode showed no significant attenuation after 12 h of testing at a current density of 50 mA cm-2. The introduction of Fe ions could modulate the electrical conductivity and morphology of the Ni3S2 structure and thus provide a high electrochemically active area, fast reaction sites, and charge transfer rate for OER activity.
Kinetically Controlled, Scalable Synthesis of γ-FeOOH Nanosheet Arrays on Nickel Foam toward Efficient Oxygen Evolution: The Key Role of In-Situ-Generated γ-NiOOH

Ke Wang,Hongfang Du,Song He,Lei Liu,Kai Yang,Jinmeng Sun,Yuhang Liu,Zhuzhu Du,Linghai Xie,Wei Ai,Wei Huang

DOI: https://doi.org/10.1002/adma.202005587

Abstract:Layered γ-type iron oxyhydroxide (γ-FeOOH) is a promising material for various applications; however, its sheet-shaped structure often suffers from instability that results in aggregation and leads to inferior performance. Herein, a kinetically controlled hydrolysis strategy is proposed for the scalable synthesis of γ-FeOOH nanosheets arrays (NAs) with enhanced structural stability on diverse substrates at ambient conditions. The underlying mechanisms for the growth of γ-FeOOH NAs associated with their structural evolution are systematically elucidated by alkalinity-controlled synthesis and time-dependent experiments. As a proof-of-concept application, γ-FeOOH NAs are developed as electrocatalysts for the oxygen evolution reaction (OER), where the sample grown on nickel foam (NF) exhibits superior performance of high catalytic current density, small Tafel slope, and exceptional durability, which is among the top level of FeOOH-based electrocatalysts. Density functional theory calculations suggest that γ-NiOOH in situ generated from the electrooxidation of NF would induce charge accumulation on the Fe sites of γ-FeOOH NAs, leading to enhanced OER intermediates adsorption for water splitting. This work affords a new technique to rationally design and synthesize γ-FeOOH NAs for various applications.
In Situ Growth of Amorphous Fe(OH)3 on Nickel Nitrate Hydroxide Nanoarrays for Enhanced Electrocatalytic Oxygen Evolution

Yan Ma,ZiAng Lu,Siwei Li,Jie Wu,Jing Wang,Yunchen Du,Jianmin Sun,Ping Xu

DOI: https://doi.org/10.1021/acsami.9b19437

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Development of highly efficient electrocatalyst for the oxygen evolution reaction (OER) is urgently demanded by the clean hydrogen energy. Herein, in order to further boost the OER activity of metal nitrate hydroxide materials, amorphous Fe(OH)(3) layer is in situ grown on nickel nitrate hydroxide (NiNH) nanoarrays supported on nickel foam (NF) through an interfacial hydrolysis approach, where the loading amount of the Fe(OH)(3) can be simply manipulated by the hydrolysis time. Taking advantage of the synergy of Fe(OH)(3) and NiNH, the optimized Fe(OH)(3)@NiNH/NF sample shows a very promising electrocatalytic OER activity in 1 M KOH solution, requiring a very low overpotential of 212 mV vs. reversible hydrogen electrode (RHE) to deliver a geometrical catalytic current density of 100 mA cm(-2) and a low Tafel slope of 49 mV dec(-1). This work provides a new strategy for boosting the electrocatalytic activity of metal hydroxide nitrates through the interface engineering.
Autologous Growth of Fe-doped Ni(OH)2 Nanosheets with Low Overpotential for Oxygen Evolution Reaction

Peican Wang,Yuqun Lin,Lei Wan,Baoguo Wang

DOI: https://doi.org/10.1016/j.ijhydene.2019.12.156

IF: 7.2

2020-01-01

International Journal of Hydrogen Energy

Abstract:Highly active and durable electrocatalysts for oxygen evolution reaction (OER) play a vital role in water splitting. Despite numerous efforts, the strategies to prepare durable and effective electrocatalysts via scalable methods still remain a great challenge. In this work, we fabricated Fe-doped Ni(OH)(2) ultrathin nanosheets (Fe-Ni-OH/Ni) via autologous growing of Ni(OH)(2) from Ni foam, and in situ electrochemical-assisted doping Fe into Ni(OH)(2). Benefiting from the unique structure with large surface areas and strong coupling effects between Fe and Ni, the optimal Fe-Ni-OH electrodes exhibit remarkable catalytic performance toward OER, which requires an overpotential of 220 mV to achieve a current density of 10 mA cm(-2) with a Tafel slope of 48.3 mV dec(-2). The Fe-Ni-OH electrodes also possess high stability even under a high current density of 500 mA cm(-2) for 600 h with an ultralow overpotential of 290 mV. Using Ni-Fe-OH electrodes as both anode and cathode for overall water splitting, only a small overpotential of 1.57 V is required to reach a current density of 10 mA cm(-2). Moreover, the high catalytic performance and scalable preparation method can meet the emergency needs for the practical application. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Surface reconstruction enables outstanding performance of Fe2O3/Ni(OH)2 nanosheet arrays for ultrahigh current density oxygen evolution reaction

Aiqun Kong,Houjun Zhang,Yifan Sun,Ye Lv,Menghui Liu,Haojie Li,Yifei Wang,Yan Fu,Haiyang Zhang,Wei Li,Jinli Zhang

DOI: https://doi.org/10.1016/j.apsusc.2022.156023

IF: 6.7

2023-03-01

Applied Surface Science

Abstract:Development of high-performance, high-stability and low-cost electrocatalysts toward the oxygen evolution reaction (OER) is pivotal to the water electrolysis at industrial current density. Herein, a novel Fe/Ni-based hierarchical structure was constructed with the assistance of 2D MXene, showing vertically aligned Ni(OH)2 nanosheets decorated with distinct Fe2O3 morphologies. The Fe2O3/Ni(OH)2/NF exhibited a remarkable OER activity and required only overpotentials of 291, 319 and 341 mV respectively at 500, 1000 and 1500 mA cm−2 in alkaline solution and drove the current density of 1300 mA cm−2 about 17 h at the potential of 1.64 V vs RHE. The Fe2O3/Ni(OH)2 precursor underwent in situ surface reconstitution into active FeOOH/NiOOH during alkaline OER. The outstanding performance of Fe2O3/Ni(OH)2/NF was attributable to the synergistic impact between FeOOH and NiOOH for regulating the optimal adsorption of OER intermediates. This work provides an ideal perspective to fabricate resource-rich, low-cost and high-activity FeNi-based electrode for alkaline OER at industrial current density.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Hierarchical Superhydrophilic/Superaerophobic Ni(OH) 2 @NiFe-PBA Nanoarray Supported on Nickel Foam for Boosting the Oxygen Evolution Reaction

Kai Chen,Jinjie Qian,Wei Xu,Ting-Ting Li

DOI: https://doi.org/10.1021/acs.inorgchem.3c03542

IF: 4.6

2023-12-23

Inorganic Chemistry

Abstract:The design of hierarchical electrocatalysts with plentiful active sites and high mass transfer efficiency is critical to efficiently and sustainably carrying out the oxygen evolution reaction (OER), which presents a challenging and pressing need. In this study, a hierarchical Ni(OH)(2)@NiFe-Prussian blue analogue nanoarray grown on nickel foam (NF) [labeled as Ni(OH)(2)@NiFe-PBA/NF] was synthesized by combining a mild electrodeposition method with an ion-exchange strategy. The resultant...

chemistry, inorganic & nuclear
Low-crystallinity mesoporous NiGaFe hydroxide nanosheets on macroporous Ni foam for high-efficiency oxygen evolution electrocatalysis

Shi Feng Zai,An Qi Dong,Jian Li,Zi Wen,Chun Cheng Yang,Qing Jiang

DOI: https://doi.org/10.1039/d1ta00122a

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Ni 0.65 Ga 0.30 Fe 0.05 hydroxide electrode with a hierarchical structure was fabricated through an electrodeposition method, which shows superior OER electrocatalytic performances, outperforming most of the reported OER catalysts.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Fe induced nanostructure reorganization and electronic structure modulation over CoNi (oxy)hydroxide nanorod arrays for boosting oxygen evolution reaction

Chuqiang Huang,Yuhong Zhong,Junxuan Chen,Jian Li,Wei Zhang,Jianqing Zhou,Yuanlu Zhang,Luo Yu,Ying Yu

DOI: https://doi.org/10.1016/j.cej.2020.126304

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Ni- and Co-based (oxy)hydroxides are promising candidates for oxygen evolution reaction (OER), but their limited specific surface area and poor intrinsic conductivity lead to unsatisfied OER activity. Herein, a unique and universal self-template strategy has been developed to fabricate Fe-incorporated CoNi (oxy)hydroxide (Fe-CoNi-OH) nanosheet-assembled nanorod arrays toward OER. The reorganized nanosheet-assembled nanorod hierarchical structure induced by Fe incorporation exposes more active sites and facilitates mass transfer. Furthermore, Fe incorporation modifies the electron structure of CoNi (oxy)hydroxide (CoNi-OH), and enhances its electronic conductivity for rapid electron transport, thus intrinsically enhancing the OER activity. Consequently, the Fe-CoNi-OH possesses excellent OER activity with low overpotentials of 210, 248, 304, and 349 mV to achieve current densities of 10, 100, 500, and 1000 mA cm−2, respectively, along with a very small Tafel slope of 28.0 mV dec−1, which are superior to the CoNi-OH and benchmark RuO2. By paring the Fe-CoNi-OH anode with a CoP cathode, an outstanding alkaline electrolyzer has been constructed, which only requires cell voltages of 1.506 and 1.623 V to deliver current densities of 10 and 100 mA cm−2, respectively, and can stably work for 100 h. This work provides a universal strategy to synthesize Fe-containing hierarchical nanostructured catalysts for energy conversion application.

engineering, chemical, environmental
Co3O4 Nanosheet Arrays on Ni Foam As Electrocatalyst for Oxygen Evolution Reaction

Youyi Yu,Jiali Zhang,Min Zhong,Shouwu Guo

DOI: https://doi.org/10.1007/s12678-018-0473-3

2018-01-01

Electrocatalysis

Abstract:Co3O4 nanosheet arrays on Ni foam (Co3O4 NS/NF) were designed, fabricated, and utilized as electrocatalysts for electrochemical oxygen evolution reaction (OER). The electrocatalytic performance of the Co3O4 NS/NF for OER was systematically evaluated by cyclic voltammetry, linear polarization, and Tafel curve measurements. Compared to the bare Ni foam, free-standing Co3O4 nanosheets, and commercialized Pt/C electrodes, Co3O4 NS/NF exhibits excellent OER activity in water-alkaline electrolyte with low onset overpotential (~ 50 mV), large anodic current density, and excellent durability. The compatible electrocatalytic activity for OER of the Co3O4 NS/NF is attributed to the unique nanosheet structure and the interconnected nanoarrays configuration of Co3O4 that provides plentiful catalytic active sites, in addition to the inherent catalytic activity of Co3O4. The electron transportation capability of the supporter Ni foam makes the composite a potential electrocatalyst for OER.
In situ growth of hierarchical bimetal-organic frameworks on nickel-iron foam as robust electrodes for the electrocatalytic oxygen evolution reaction

Jia Wang,Yu Jiang,Chunbo Liu,Yuanyuan Wu,Bo Liu,Wei Jiang,Hongji Li,Guangbo Che

DOI: https://doi.org/10.1016/j.jcis.2022.01.140

2022-05-15

Abstract:Evidence shows that self-supported electrocatalysts are crucial role to solving environmental and energy issues. In this study, self-supported 2D metal-organic framework (MOF) nanosheets grown in situ on nickel-iron foam (NFF) were prepared by a one-step solvothermal process. The hierarchical nanostructure possesses a high specific surface area and abundant metal sites, which are beneficial for electrocatalytic reactions. In the electrocatalytic oxygen evolution reaction (OER), the optimal NiFe(20Ni)-MOF/NFF can drive current densities of 10, 50 and 100 mA cm-2 at small overpotentials of 226, 277 and 294 mV, respectively. According to the characterization results, the OER performance is improved by the synergistic action of bimetals and the generation of hydroxides/oxyhydroxides. This work provides new insights into fabricating self-supported MOF-based electrodes for water splitting that are simple and highly efficient.
Amorphous Cobalt Boride Nanosheets Directly Grown on Nickel Foam: Controllable Alternately Dipping Deposition for Efficient Oxygen Evolution

Yuanyuan Jiang,Yating Fang,Chuanxia Chen,Pengjuan Ni,Biao Kong,Zhongqian Song,Yizhong Lu,Li Niu

DOI: https://doi.org/10.1002/celc.201900897

IF: 4

2019-01-01

ChemElectroChem

Abstract:This study provides a unique method for the rapid deposition of amorphous Co-B nanosheets on Ni foam (Co-B/NF) by alternatively dipping Ni foam into cobalt salt and borohydride solutions. The as-prepared Co-B/NF can act as a highly efficient electrocatalyst for the oxygen evolution reaction (OER). The catalyst affords a current density of 20 mA cm(-2) at 265 mV overpotential during the OER in 1.0 M KOH solution, ranking it among the best reported nonprecious OER electrocatalysts. This strategy for constructing electrocatalysis electrodes prevails over the conventional method of drop-coating metal boride dispersions on the electrode, having better intrinsic stability and fully exposed active site surfaces. Given the low cost, ease of fabrication, good controllability, and high OER electrocatalytic activity and stability, Co-B/NF has great potential as a high-performance anode catalyst for water splitting.
Rapid synthesis of Co3O4 nanosheet arrays on Ni foam by in situ electrochemical oxidization of air-plasma engraved Co(OH)2 for efficient oxygen evolution

Wenling Gu,Liuyong Hu,Xiaoqing Zhu,Changshuai Shang,Jing Li,Erkang Wang

DOI: https://doi.org/10.1039/c8cc06399k

2018-11-08

Abstract:A novel strategy to fabricate Co3O4 nanosheet arrays for the oxygen evolution reaction (OER) was developed by electrodeposition of Co(OH)2 on nickel foam (NF) and subsequent in situ electrochemical oxidation into Co3O4 during the OER. The produced Co3O4@NF-15, which was further engraved with air plasma, exhibits the best performance and long-term stability.
A Ni-MOF nanosheet array for efficient oxygen evolution electrocatalysis in alkaline media

Chuqian Meng,Yang Cao,Yonglan Luo,Fang Zhang,Qingquan Kong,Abdulmohsen Ali Alshehri,Khalid Ahmed Alzahrani,Tingshuai Li,Qian Liu,Xuping Sun

DOI: https://doi.org/10.1039/d1qi00345c

IF: 7.779

2021-01-01

Inorganic Chemistry Frontiers

Abstract:Ni-MOF(bpdc) nanosheet array on nickel foam (Ni-MOF/NF) is a superior OER catalyst with a requirement of an overpotential of 350 mV to attain 20 mA cm −2 in 1.0 M KOH.

chemistry, inorganic & nuclear
Topologic Transition-Induced Abundant Undercoordinated Fe Active Sites in Nifeooh for Superior Oxygen Evolution

Chunxu Jia,Chao Zhen,Lichang Yin,Huaze Zhu,Peipei Du,Ali Han,Gang Liu,Hui-Ming Cheng

DOI: https://doi.org/10.1016/j.nanoen.2022.108044

2023-01-01

Abstract:Highly active, robust and low-cost oxygen evolution reaction (OER) electrodes are urgently required to satisfy the industrial hydrogen production via water electrolysis. However, numerous earth-abundant materials have severely suffered from the low stability over thousands of hours at large current densities. Herein, ultrathin NiFeOOH nanosheets with abundant undercoordinated Fe active sites on a Ni foam electrode for OER were obtained via an electrochemically topologic transition process. They deliver a low overpotentials of 210 mV at 10 mA cm(-2) and a small Tafel slope of 32 mV dec(-1) owing to the abundant Fe active sites and exhibit high stability at high current densities of 400-600 mA cm(-2) over 2000 h due to their strong adhesion to Ni foam. Moreover, only a 370 mV overpotentials is required to produce a high current density of 400 mA cm-2 in a two-electrode water electrolysis system, demonstrating an energy efficiency as high as similar to 77%.
Formation of NiFe-MOF nanosheets on Fe foam to achieve advanced electrocatalytic oxygen evolution

Yutong Jia,Zhikun Xu,Lin Li,Shuangyan Lin

DOI: https://doi.org/10.1039/d2dt00127f

IF: 4

2022-01-01

Dalton Transactions

Abstract:A facile approach was proposed to construct NiFe-MOF nanosheets on Fe foam (FF) that shows impressive electrocatalytic OER performance with an overpotential of 216 mV at 50 mA cm −2 , and outstanding stability (beyond 50 h at 200 mA cm −2 ).

chemistry, inorganic & nuclear

<i>In situ</i> growth of Fe and Nb co-doped β-Ni(OH)<sub>2</sub> nanosheet arrays on nickel foam for an efficient oxygen evolution reaction

In Situ Growth of Fe and Nb Co-Doped Β-Ni(oh)2 Nanosheet Arrays on Nickel Foam for an Efficient Oxygen Evolution Reaction

High-Density NiMnFe Hydroxide Nanoparticle-Nanosheet Arrays for Industrial-Level Electrochemical Oxygen Evolution Reaction

High-Density NiMnFe Hydroxide Hierarchical Nano-arrays for Industrial-level Electro-chemical Oxygen Evolution Reaction

Composition-Balanced Bi-Metallic MOFs Directly Grown on Nickel Foam for High-Efficiency Oxygen Evolution Reaction

Three-Dimensional Ni Foam-Supported CoO Nanoparticles/N-Doped Carbon Multilayer Nanocomposite Electrode for Oxygen Evolution

Nanoarchitectonics of Fe-Doped Ni3S2 Arrays on Ni Foam from MOF Precursors for Promoted Oxygen Evolution Reaction Activity

Kinetically Controlled, Scalable Synthesis of γ-FeOOH Nanosheet Arrays on Nickel Foam toward Efficient Oxygen Evolution: The Key Role of In-Situ-Generated γ-NiOOH

In Situ Growth of Amorphous Fe(OH)3 on Nickel Nitrate Hydroxide Nanoarrays for Enhanced Electrocatalytic Oxygen Evolution

Autologous Growth of Fe-doped Ni(OH)2 Nanosheets with Low Overpotential for Oxygen Evolution Reaction

Surface reconstruction enables outstanding performance of Fe2O3/Ni(OH)2 nanosheet arrays for ultrahigh current density oxygen evolution reaction

Hierarchical Superhydrophilic/Superaerophobic Ni(OH) 2 @NiFe-PBA Nanoarray Supported on Nickel Foam for Boosting the Oxygen Evolution Reaction

Low-crystallinity mesoporous NiGaFe hydroxide nanosheets on macroporous Ni foam for high-efficiency oxygen evolution electrocatalysis

Fe induced nanostructure reorganization and electronic structure modulation over CoNi (oxy)hydroxide nanorod arrays for boosting oxygen evolution reaction

Co3O4 Nanosheet Arrays on Ni Foam As Electrocatalyst for Oxygen Evolution Reaction

In situ growth of hierarchical bimetal-organic frameworks on nickel-iron foam as robust electrodes for the electrocatalytic oxygen evolution reaction

Amorphous Cobalt Boride Nanosheets Directly Grown on Nickel Foam: Controllable Alternately Dipping Deposition for Efficient Oxygen Evolution

Rapid synthesis of Co3O4 nanosheet arrays on Ni foam by in situ electrochemical oxidization of air-plasma engraved Co(OH)2 for efficient oxygen evolution

A Ni-MOF nanosheet array for efficient oxygen evolution electrocatalysis in alkaline media

Topologic Transition-Induced Abundant Undercoordinated Fe Active Sites in Nifeooh for Superior Oxygen Evolution

Formation of NiFe-MOF nanosheets on Fe foam to achieve advanced electrocatalytic oxygen evolution