Abstract:The insufficient ionic conductivity of oxide-based solid electrolytes and the large interfacial resistance between the cathode material and the solid electrolyte severely limit the performance of room-temperature all-solid-state sodium rechargeable batteries. A NASICON solid electrolyte Na3.4Zr1.9Zn0.1Si2.2P0.8O12, with superior room-temperature conductivity of 5.27 × 10–3 S cm–1, is achieved by simultaneous substitution of Zr4+ by aliovalent Zn2+ and P5+ by Si4+ in Na3Zr2Si2PO12. The bulk conductivity and grain boundary conductivity of Na3.4Zr1.9Zn0.1Si2.2P0.8O12 are nearly 20 times and almost 50 times greater than those of pristine Na3Zr2Si2PO12, respectively. The FeS2||polydopamine-Na3.4Zr1.9Zn0.1Si2.2P0.8O12||Na all-solid-state sodium batteries, with a polydopamine modification thin layer between the solid electrolyte and the cathode, maintain a high reversible capacity of 236.5 mAh g–1 at a 0.1 C rate for 100 cycles and a capacity of 133.1 mAh g–1 at 0.5 C for 300 cycles, demonstrating high performance for all-solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01432?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01432</a>.Experimental section; XRD, NPD, SEM, and EIS measurements for different solid electrolyte materials; STEM-EDS and DC polarization measurement for Zn0.1 sample; EDS measurement for Zn0.1 sample before and after contact with sodium; unit cell parameters of different solid electrolyte materials; structural parameters of different solid electrolyte materials; BVEL analysis and the comparison of bottleneck sizes; conductivities, activation energies, and relative densities of different solid electrolyte materials; FTIR measurement for Zn0.1 pellet with and without PDA layer; charge–discharge curves of FeS2||Zn0.1||Na all-solid-state battery; comparison of conductivities and battery performances reported in the literature and in this work; cross-sectional images of the cathode/electrolyte interface before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01432/suppl_file/nz0c01432_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Na10TiP2Se12 As Novel Electrolyte for All-Solid-State Na-Battery

Na3NH2B12H12 As High Performance Solid Electrolyte for All-Solid-state Na-ion Batteries

A Novel Solid Electrolyte Material (li17ge2p3s20) with High Ionic Conductivity

Synthesis and Understanding of Na11Sn2PSe12 with Enhanced Ionic Conductivity for All-Solid-state Na-ion Battery

Na10SnSb2S12: A nanosized air-stable solid electrolyte for all-solid-state sodium batteries

NASICON-structured Na3.1Zr1.95Mg0.05Si2PO12 solid electrolyte for solid-state sodium batteries

Design and synthesis of the superionic conductor Na10SnP2S12

Enabling superior electrochemical performances of Li10SnP2S12-based all-solid-state batteries using lithium halide electrolytes

Ultrastable All-Solid-State Sodium Rechargeable Batteries

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries

Designing a Novel Electrolyte Na3.2Hf2Si2.2P0.8O11.85F0.3 for All‐Solid‐State Na‐O2 Batteries

Composite Solid Electrolyte of Na3PS4-PEO for All-Solid-state SnS2/Na Batteries with Excellent Interfacial Compatibility Between Electrolyte and Na Metal

Synthesis of Br-rich argyrodite electrolytes enables all-solid-state batteries with superior battery performances at different operating temperatures

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries

Achievement of high ionic conductivity and electrochemical stability by W/Sn-doped Na3SbS4 conductors designed for all-solid-state sodium-ion batteries

Tungsten and Boron Codoping toward High Ionic Conductivity and Stable Sodium Solid Electrolyte for All-Solid-State Sodium Batteries

Designing a Novel Electrolyte Na3.2Hf2Si2.2P0.8O11.85F0.3 for All-Solid-State Na-O-2 Batteries

Cobalt-doped pyrite for Na11Sn2SbS11.5Se0.5 electrolyte based all-solid-state sodium battery with enhanced capacity

LaCl3-based sodium halide solid electrolytes with high ionic conductivity for all-solid-state batteries

Li15P4S16Cl3, a Lithium Chlorothiophosphate as a Solid-State Ionic Conductor

Nb/Al co‐doped Li7La3Zr2O12 Composite Solid Electrolyte for High‐Performance All‐Solid‐State Batteries