Underpotential Deposition of Bi on Au(111) in BMIBF4 Ionic Liquid: An In-Situ STM Study

Yong-Chun Fu,Yu-zhuan Su,De-yin Wu,Jia-wei Yan,Bing-wei Mao

DOI: https://doi.org/10.1149/ma2008-02/41/2628

2008-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

Structural and Electronic Properties of Atomically Thin Bismuth on Au(111)

He Bingchen,Tian Guo,Gou Jian,Liu Baoxing,Shen Kongchao,Tian Qiwei,Yu Zhengqing,Song Fei,Xie Haipeng,Gao Yongli,Lu Yunhao,Wu Kehui,Chen Lan,Huang Han

DOI: https://doi.org/10.1016/j.susc.2018.09.005

IF: 1.9

2018-01-01

Surface Science

Abstract:Atomically thin Bismuth (Bi) films are predicated to be candidates for high temperature quantum spin hall materials. Here, we reported the structural evolutions and the corresponding electronic properties of Bi ultrathin films on Au(111) at initial stage as a function of coverage using low-energy electron diffraction (LEED), scanning tunneling microscopy (STM) and photoemission spectroscopy (PES). The small window for a stable two dimensional (2D) Bi in Kagome and honeycomb lattice on Au(111) has been optimized. LEED and STM results show that Bi atoms self-assemble into dimered (5 x 5) superdots, (root 37 x root 37)R25. 3 degrees in a Kagome lattice and (p x root 3) stripes sequentially in the first monolayer regime and into bi-layered Bi (110) islands afterwards. UPS results show the disappearance of Au(111) surface states at coverage of 0.18 ML, revealing the Van der Waals interactions between Au(111) and Bi adatoms. The repulsive interactions between Bi atoms prevent the 2D Bi structure from islands forming at initial stage and benefit large domains in (root 37 x root 37)R25. 3 degrees Kagome lattice. Such 2D Bi may be interesting because of its relevance in terms of novel physical properties.
Atomic resolution liquid-cell transmission electron microscopy investigations of the dynamics of nanoparticles in ultrathin liquids.

Guomin Zhu,Yingying Jiang,Wei Huang,Hui Zhang,Fang Lin,Chuanhong Jin

DOI: https://doi.org/10.1039/c3cc46667a

IF: 4.9

2013-01-01

Chemical Communications

Abstract:We proposed a highly reproducible method that enables atomic resolution transmission electron microscopy investigations of the dynamics of nanoparticles in liquids. An ultrathin liquid layer was established as a result of formation of bubbles that was initiated and tuned by beam radiation. The migration, aggregation and rotation of palladium nanoparticles were observed.
Pb deposition onto Au(111) from acidic chloroaluminate ionic liquid

Feng-Xia Wang,Ge-Bo Pan,Ying-Dan Liu,Yan Xiao

DOI: https://doi.org/10.1016/j.cplett.2010.02.019

IF: 2.719

2010-01-01

Chemical Physics Letters

Abstract:Nanoscale electrodeposition of Pb on Au(111) from an acidic chloroaluminate ionic liquid has been studied by in situ STM. Triangular-shaped vacancies of Pb cofined to a monoatomic height have been grown controllably.
Electrocrystallization of Bi on Au(111) in an Acidic Chloroaluminate Ionic Liquid

Ge‐Bo Pan,W. Freyland

DOI: https://doi.org/10.1016/j.electacta.2007.05.075

IF: 6.6

2007-01-01

Electrochimica Acta

Abstract:The electrodeposition of Bi on Au(1 1 1) in an acidic chloroaluminate ionic liquid has been investigated by cyclic voltammetry and in situ STM. Two different UPD processes of Bi have been observed at 1.2 and 0.9 V versus Al/Al(III). Multiple domain structures are found for the first UPD, whereas a uniaxially commensurate monolayer is formed for the second one. More interestingly, high-resolution STM images reveal some meta-stable intermediate superstructure reported here for the first time. The co-adsorption of AlCl4− and Bi adatoms is clearly demonstrated. In the OPD region, different morphologies of Bi crystals have been obtained: a needle-like structure when the potential is swept continuously to 0.6 V, and ultrathin films of Bi when the potential is jumped from 1.3 to 0.4 V.
Electrodeposition of Sb on Au(111) from an Acidic Chloroaluminate Ionic Liquid: an in Situ STM Study

Feng-Xia Wang,Ge-Bo Pan,Ying-Dan Liu,Yan Xiao

DOI: https://doi.org/10.1021/jp910973c

2010-01-01

The Journal of Physical Chemistry C

Abstract:The electrodeposition of Sb on Au(111) in an acidic chloroaluminate ionic liquid has been investigated by cyclic voltammetry and scanning tunneling microscopy (STM). In Situ STM imaging has revealed ail ordered Structure of the adsorbed SbCl2+ at 1.1 V vs Al/Al(III), which has further compressed into a Moire-like pattern at 1.05 V. In the UPD range of Sb, a sudden smoothing of surface has been observed at 1.0 V, which is similar to those in BMIBF4. In the later stage, the nucleation process begins to Occur and is followed by the formation of 2D-nanostripe architectures. Instead of width, the number and the length of Sb nanostripes increase with time. When the potential goes more negative, Clusters are formed oil the top of close-packed Sb nanostripes. These results are different from the Sb UPD in the neutral melt, implying that the acidicity of ionic liquid might play ail Important role in the deposition of Sb.
In situ STM investigation of spinodal decomposition and surface alloying during underpotential deposition of Cd on Au(111) from an ionic liquid.

Ge-Bo Pan,Werner Freyland

DOI: https://doi.org/10.1039/b703354k

IF: 3.3

2007-01-01

Physical Chemistry Chemical Physics

Abstract:The electrodeposition and anodic dissolution of Cd on Au(111) in an acidic chloroaluminate ionic liquid (MBIC - AlCl3, 42 : 58 mol%) have been investigated by cyclic voltammetry and in situ STM. In the Cd underpotential deposition region, various nanostructures can be distinguished. At a potential of 0.95 V vs. Al/Al(III), a transformation from a well ordered AlCl4- adlayer to a (root 3 x root 19) superstructure, presumably due to Cd - AlCl4- coadsorption, is observed. Reducing the potential to 0.45 V, surface alloying of Cd and Au occurs, which is evidenced for the first time by typical spinodal structures occurring both during deposition and dissolution of the surface alloy layer having a hexagonal structure. At still lower potentials below 0.21 V, a layer-by-layer growth of bulk Cd sets in.
Characterization of Heterostructural Palladium Deposition on Spherical Gold Nanoparticles by in Situ Liquid Cell Transmission Electron Microscopy

Zhou Xiao-Qin,Zhang Hui,Zhang Ze,Chen Xin,Jin Chuan-Hong

DOI: https://doi.org/10.3866/pku.whxb201701041

2017-01-01

Abstract:We report an in situ liquid cell scanning transmission electron microscopy (STEM) study of the heterogeneous deposition of palladium (Pd) on spherical gold (Au) nanoparticles in solution.The dynamic processes observed here revealed different behaviors of Pd deposition on Au nanoparticles.Under irradiation by an energetic electron beam,Pd was reduced and selectively deposited on Au nanoparticles through the island deposition mode.The deposition processes were accompanied with structural relaxation and surface migration of the Pd islands,and the size of the Au-Pd composite particles showed oscillatory growth behavior.In contrast,the Pd coverage on Au increased monotonically.In addition,we also captured the formation of Pd clusters through homogeneous nucleation and growth,and the subsequent coalescence of Pd clusters with islands on the Au-Pd heterostructures.The associated heterogeneous deposition mechanisms were proposed and quantitatively analyzed.The shapes and structures of the Au-Pd composite particles were characterized by highresolution transmission electron microscopy (HRTEM),which revealed the deposited Pd on the Au spherical nanoparticles was polycrystalline and contained several Pd crystallites with random orientations.The results presented here will serve as an important reference to understand heterogeneous growth in liquid solutions.
In Situ Raman Monitoring of Potential-Dependent Adlayer Structures on the Au(111)/Ionic Liquid Interface

Jia-Ying Fu,Xiao-Chong Li,Zhou Yu,Xu-Nan Huang-Fu,Jian-Ang Fan,Zhi-Qi Zhang,Sheng Huang,Ju-Fang Zheng,Ya-Hao Wang,Xiao-Shun Zhou

DOI: https://doi.org/10.1021/acs.langmuir.2c00703

IF: 3.9

2022-05-04

Langmuir

Abstract:Probing the adlayer structures on an electrode/electrolyte interface is one of the most important tasks in modern electrochemistry for clarifying the electrochemical processes. Herein, we have combined cyclic voltammetry and electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy techniques to explore the potential-dependent adlayer structures on Au(111) in a room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF6) without or with pyridine (Py). It is clearly found that the BMI+ cations strongly adsorb on the negatively charged surface with a flat-lying orientation, leaving a little space for Py adsorption. Upon increasing the potentials of the electrode, the variations of Raman band intensities and frequencies reveal that the interaction between the BMI+ cations and the Au surface becomes weak; meanwhile, the Py adsorption becomes strong, and its geometry turns from flat, tilted to vertical. Finally, BMI+ cations desorb and leave plenty of surface sites for Py adsorption in bulk solution, and a N-bonded compact Py adlayer is formed on the very positively charged surface. This causes obvious anodic peaks in cyclic voltammograms, and the peak currents increase with the square root of the scanning rate. The present work provides a fair molecular-level understanding of electrochemical interfaces and molecular adsorption of Py in ionic liquids.

chemistry, multidisciplinary, physical,materials science
Electronic Structure Evolution at DBBA/Au(111) Interface W/O Bismuth Insertion Layer

Qiwei Tian,Bingchen He,Yuan Zhao,Shitan Wang,Junting Xiao,Fei Song,Yao Wang,Yunhao Lu,Haipeng Xie,Han Huang,Yongli Gao

DOI: https://doi.org/10.1016/j.synthmet.2019.03.016

IF: 4

2019-01-01

Synthetic Metals

Abstract:Atomically precise graphene nanoribbons (GNRs) can be on-surface synthesized from halogen containing molecular precursors. Here, we investigated the electronic structure evolution of 10,10'-dibromo-9,9'-bianthracene (DBBA), a famous precursor to 7-AGNRs, on both Au(111) and Bi- 3 x root 3 - Au(111) as a function of film thickness and post-annealing temperature using photoemission spectroscopy, low temperature scanning tunneling microscopy and density functional theories. No obvious changes in electronic structure of DBBA in three STM-observed configurations can be detected, indicating that nonplanar pi-conjugated DBBA is physisorbed on both surfaces. The energy level alignments at the DBBA-substrate interfaces are demonstrated. Bismuth(Bi) insertion layer makes molecular - substrate interaction weaker, and makes the energy levels of DBBA thin film rigidly shift by (similar to)0.70 eV away from Fermi level, which enlarges the hole injection barrier and results in DBBA desorption at (similar to)470 K before dehalogenation occuring. The surface work function reduction can be explained by the push back effect and charge transfer induced interface dipole. Our findings explain why 7-GNRs could not be formed on Bi- 3 x root 3 Au(111).
Copper Deposition on Au(111) in a Deep Eutectic Solvent: An In Situ STM Study**

Zhuo Tan,Shuai Liu,Jiedu Wu,Ziang Nan,Fangzu Yang,Dongping Zhan,Jiawei Yan,Bingwei Mao

DOI: https://doi.org/10.1002/celc.202101412

IF: 4

2022-01-20

ChemElectroChem

Abstract:Electrolyte composition can have significant influences on metal deposition. In this work we employ in‐situ scanning tunneling microscope (STM), together with electrochemical methods to investigate Cu deposition on Au (111) in ethaline containing CuCl2. Cyclic voltammograms in the Cu overpotential deposition regime are dominated by a rapidly rising cathodic current, accompanied by a preceding shoulder. Instantaneous nucleation and three‐dimensional growth are discerned for the Cu deposition at larger overpotential. In‐situ STM reveals the shoulder process is associated with the formation of monoatomic‐height clusters. Meanwhile, morphology evolutions of Cu nuclei along with time and potential are followed, and layered hexagonal and hexagon fortress shaped Cu nuclei and their growth are directly observed. Furthermore, atomic‐resolution imaging elucidates an ordered incommensurate (6×√79) adsorption structure on the surface of a Cu nucleus. Our observations are helpful in gaining deeper insights into the effect of deep eutectic solvents (DES) on Cu deposition at microscopic level. Copper deposition on gold electrode in a deep eutectic solvent (DES) containing bivalent Cu(II) are studied by in‐situ scanning tunneling microscope (STM) combined with electrochemical measurements. Initial formation of monoatomic‐height clusters and subsequent morphology evolution of Cu nuclei, as well as an incommensurate (6×√79) adsorption structure are observed, which provide microscopic information for deeper understanding of the role of DES.

electrochemistry
STM tip-induced nanostructuring of Zn in an ionic liquid on Au(111) electrode surfaces

Jin-Gang Wang,Jing Tang,Yong-Chun Fu,Yi-Min Wei,Zhao-Bin Chen,Bing-Wei Mao

DOI: https://doi.org/10.1016/j.elecom.2006.10.038

IF: 5.443

2007-01-01

Electrochemistry Communications

Abstract:In this communication, the “jump-to-contact” based STM tip-induced nanostructuring is extended to BMIBF4 ionic liquid for the first time. It is demonstrated successfully that Zn, as an example of less noble metal and being hard to deposit from aqueous solutions, can be nanostructured on Au(111) surfaces in the ionic liquid. Due to the large effective tunnel barrier in the ionic liquid, the Z-pulse required to create Zn nanoclusters in ionic liquid is about twice as large as for Cu nanoclusters of similar size in aqueous solutions. Patterns as well as large-scale arrays consisting of 100×100 Zn nanoclusters have been produced. The present work demonstrates the feasibility for surface nanostructuring a new category of systems that have not been possible in aqueous solutions, which could open up new opportunities for studies of nanoscopic effects from various aspects.
Effects of Monolayer Bi on the Self-Assembly of DBBA on Au(111)

Guo Tian,Yixian Shen,Bingchen He,Zhengqing Yu,Fei Song,Yunhao Lu,Pingshan Wang,Yongli Gao,Han Huang

DOI: https://doi.org/10.1016/j.susc.2017.08.008

IF: 1.9

2017-01-01

Surface Science

Abstract:The initial growth behaviors of nonplanar 10,10'-dibromo-9,9'-bianthryl (DBBA) molecules on the Au(111) substrates, which is either pristine or Bi-3 x root 3-Au(111), at low deposition rates have been systematically investigated using low temperature scanning tunneling microscopy (LT-STM) and density functional theories (DFT) calculations. The effects of such substrates on the subsequent graphene nanoribbons (GNRs) formation are addressed. On clean Au(111), DBBA molecules self-assemble into highly ordered commensurate single-molecule chains along <11<(2)over bar>>(Au) at a coverage of 0.8 monolayer (ML), and collectively transit into long-range ordered commensurate double-molecule chains along <1<(1)over bar>0>(Au) but with many single-molecule vacancies at a coverage of 1.2 ML, revealing the delicate competing between intermolecular interactions and molecule-substrate interfacial interactions. The interfacial interactions are further tuned by introducing bismuth to form a Bi-3 x root 3-Au(111)surface, where DBBA molecules self-assemble into an unique hexamer phase due to the enhanced intermolecular interactions via C-H center dot center dot center dot pi and halogen bonds. DFT calculations confirm the proposed molecular configuration change of single DBBA molecule when adsorbed on different substrates. The calculated difference in C-Br bond gives further insight into why no GNRs formed on Bi-3 x root 3-Au(111). (C) 2017 Elsevier B.V. All rights reserved.
A Novel Atomic Force Microscope Operating in Liquid for in Situ Investigation of Electrochemical Preparation of Porous Alumina.

HJ Zhang,DX Zhang,YL He

DOI: https://doi.org/10.1002/jemt.20143

2005-01-01

Microscopy Research and Technique

Abstract:A novel atomic force microscope (AFM) operating in liquid is described in this article. The specially designed AFM probe involves a tip attached to a cantilever, a tip holder, and a circular Plexiglas window. When the probe dives into the fluid, a circular meniscus is established around the Plexiglas window, preventing the tip from being affected or destroyed by surface tension of the liquid. In this setup, the whole scanning probe and the sample can completely dive into fluid. Meanwhile, the probe tip scans over the sample surface when the instrument works. These advantages enable the instrument to scan comparatively large or heavy samples with a high speed. The highest scan rate is about 30 lines/s or 14 s for a 400 x 400-pixel, 3 x 3 Pin image. Using the new AFM, we carry out in-situ investigation of the formation processes of porous alumina during electrochemical anodic oxidation. A lead ring and an aluminum foil serve as cathode and anode, respectively. They are entirely immersed in the bath electrolyte, which is oxalic acid solution. During anodic oxidation, the AFM images of the sample surface are successively acquired without elevating the sample out of the solution. Experiments reveal that electrochemical reactions take place soon after the power supply is switched on, and with the progression of anodization, nanostructures of porous alumina gradually occur on the aluminum substrate, finally yielding ordered arrays of nanopores. As a typical example of applications, the results of this work show that the new AFM is an ideal and powerful tool for in-situ observation and study of materials or samples in aqueous solutions. (c) 2005 Wiley-Liss.Inc.
Observation of a Surface Alloying-to-dealloying Transition During Growth of Bi on Ag(111)

K. H. L. Zhang,I. M. McLeod,Y. H. Lu,V. R. Dhanak,A. Matilainen,M. Lahti,K. Pussi,R. G. Egdell,X-S. Wang,A. T. S. Wee,W. Chen

DOI: https://doi.org/10.1103/physrevb.83.235418

IF: 3.7

2011-01-01

Physical Review B

Abstract:The atomic structures that develop as a function of coverage during deposition of Bi on Ag(111) have been studied using low-temperature scanning tunneling microscopy, low-energy electron diffraction, and ab initio calculations. The growth process involves two sequential stages. At low coverage, Bi atoms are incorporated into the topmost layer of Ag(111), resulting in the formation of an Ag2Bi alloy confined to the surface and ordered (root 3 x root 3)R30 degrees Ag2Bi islands supported on Ag(111). This mode of accommodation of Bi was found to be energetically favorable based on ab initio total-energy calculations. At coverage above a critical value of 0.55 monolayers, the Ag2Bi alloy phase gradually converts into an ordered Bi (p x root 3) overlayer structure supported on Ag(111). We postulate that the dealloying transition is likely driven by compressive strain induced by incorporation of large-size Bi atoms into Ag at a high coverage and the subsequent lack of miscibility of Ag and Bi bulk phases. After completion of the dealloying process, Bi(110) thin films can be grown epitaxially on top of Ag(111) with a chemically abrupt interface.
Pits and Adatoms at the Interface of 1-Ml C-84/Ag (111)

Wang Peng,Zhang Han-Jie,Li Yan-Jun,Sheng Chun-Qi,Li Wen-Jie,Xing Xiu-Na,Li Hai-Yang,He Pi-Mo,Bao Shi-Ning,Li Hong-Nian

DOI: https://doi.org/10.1088/1674-1056/22/12/126803

2013-01-01

Chinese Physics B

Abstract:We prepare a well-defined C84 monolayer on the surface of Ag（111） and study the geometric structure by scanning tunneling microscopy（STM）. The C84 molecules form a nearly close-packed incommensurate R30 lattice. The lattice is long-distance ordered with numerous local disorders. The monolayer exhibits complex bright/dim contrast; the largest height difference between the molecules can be greater than 0.4 nm. Annealing the monolayer at 380 C can desorb part of the molecules, but more than sixty percent molecules stay on the Ag（111） surface even after the sample has been annealed at 650 C. Our analyses reveal that the 7-atom pits form beneath many molecules. Some other molecules sit at the 1-atom pits. Ag adatoms（those removed substrate atoms, accompanying the pit formation） play a very important role in this system. The adatoms can either stabilize or destabilize the monolayer, depending on the distribution manner of the adatoms at the interface. The distribution manner is determined by the co-play of the following factors: the dimension of the interstitial regions of the C84 overlayer, the number of the adatoms, and the long-distance migration of part adatoms.
In Situ Atomic Force Microscopic Studies of LiFSI-[Py1,4]FSI Interfacial Nanostructure on Au(111): Solid Electrolyte Interphase and Lithium Underpotential Deposition

Shikun Liu,Tong Cui,Timo Carstens,Jiupeng Zhao,Natalia Borisenko,Xiaoxu Liu,Zhen Liu,Yao Li,Frank Endres

DOI: https://doi.org/10.1021/acs.jpcc.1c09340

2021-01-01

Abstract:In this paper, the structure of the LiFSI-[Py-1,Py-4]FSI interface on Au(111) was investigated using in situ atomic force microscopy and cyclic voltammetry. Raman and IR vibrational spectroscopy was applied to evaluate the coordination of Li+ ions with the FSI- anion. It was found that [Li(FSI)(3)](2-) species are present in the solutions. The solvation layer number and the forces decrease at higher concentration of Li+ ions. Therefore, the driving force, which is required for the [Li(FSI)(3)](2-) species to pass through the solvation layer to reach the electrode surface, is lowered. This increases the onset potentials of the SEI layer formation and lithium underpotential deposition (Li-UPD) at high Li+ concentrations. It was found that the onset potentials are -0.8, -0.7, -0.6, and -0.4 V for the Li-UPD and -2.0, -1.6, -1.4, and -1.3 V for the SEI layer formation, vs the Pt-(quasi)reference electrode, corresponding to Li+ concentrations of 0.1, 0.25, 0.5, and 1 M, respectively.
Kinetic Studies of Underpotential Deposition of Antimony on Se-modified Au Electrode

Xuezhao Shi,Xin Zhang,Chuanli Ma,Chunming Wang

DOI: https://doi.org/10.1007/s10008-009-0793-6

IF: 2.747

2009-01-01

Journal of Solid State Electrochemistry

Abstract:Atomic layers of antimony can be electrodeposited onto the Se monolayer covered Au electrode in the underpotential region. In this paper, the formation and dissolution kinetics of antimony monolayer on the Se monolayer covered Au electrode are investigated using cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Scanning-rate-dependent CV experiments reveal that the peak current of underpotential deposition (UPD) wave of antimony is not a linear function of the scanning rate, υ , but scales as υ 2/3 . Similar behavior is observed when the Antimony monolayer is stripped from the modified substrate. These results indicate the character of monolayer formation and dissolution by a two-dimensional nucleation and growth mechanism. Additionally, current density−time transient obtained through CA experiments also reveal that both the deposition and stripping of the antimony monolayer involve an instantaneous nucleation and two-dimensional growth process.
Direct Observation of Single Atoms in Sinter-Resistant and Bimetallic Catalyst Systems Synthesized by Atomic Layer Deposition

K.-B. Low,Y. Lei,J. Lu,J.W. Elam

DOI: https://doi.org/10.1017/s1431927613010520

IF: 4.0991

2013-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.
The Creation of Nanostructures on an Au111 Electrode by Tip-Induced Iron Deposition from an Ionic Liquid.

Yi-Min Wei,Xiao-Shun Zhou,Jin-Gang Wang,Jing Tang,Bing-Wei Mao,Dieter M. Kolb

DOI: https://doi.org/10.1002/smll.200800037

IF: 13.3

2008-01-01

Small

Abstract:High-precision nanostructuring with an STM combined with electrodeposition of a reactive metal allows the creation of iron clusters in an ionic liquid. This type of structuring would not be possible in an aqueous solution. The image shows a ring of 48 iron clusters on an Au(111) electrode surface. The diameter of the ring is 120 nm and the average height of the clusters is 0.6 nm.
Potential-Induced Phase Transition of N-Isobutyryl-L-cysteine Monolayers on Au (111) Surfaces

Chen Ai-Xi,Wang Hong,Duan Sai,Zhang Hai-Ming,Xu Xin,Chi Li-Feng

DOI: https://doi.org/10.3866/pku.whxb201702102

2017-01-01

Abstract:Functional solid substrates modified by self-assembled monolayers (SAMs) have potential applications in biosensors, chromatography, and biocompatible materials. The potential-induced phase transition of N-isobutyryl-L-cysteine (L-NIBC) SAMs on Au(111) surfaces was investigated by in-situ electrochemical scanning tunneling microscopy (EC-STM) in 0.1 mol.L-1 H2SO4 solution. The NIBC SAMs with two distinct structures (alpha phase and beta phase) can be prepared by immersing the Au(111) substrate in pure NIBC aqueous solution and NIBC solution controlled by phosphate buffer at pH 7, respectively. The as-prepared a phase and beta phase of NIBC SAMs show various structural changes under the control of electrochemical potentials of the Au(111) in H2SO4 solution. The a phase NIBC SAMs exhibit structural changes from ordered to disordered structures with potential changes from 0.7 V (vs saturated calomel electrode, SCE) to 0.2 V. However, the beta phase NIBC SAMs undergo structural changes from disordered structures (E < 0.3 V) to y phase (0.4 V < E < 0.5 V) and finally to the beta phase (0.5 V < E < 0.7 V). EC-STM images also indicate that the phase transition from the alpha phase NIBC SAMs to the a phase occurs at positive potential. Combined with density functional theory (DFT) calculations, the phase transition from the beta phase to the a phase is explained by the potential-induced break of bonding interactions between -COO- and the negatively charged gold surfaces.

Underpotential Deposition of Bi on Au(111) in BMIBF4 Ionic Liquid: An In-Situ STM Study

Structural and Electronic Properties of Atomically Thin Bismuth on Au(111)

Atomic resolution liquid-cell transmission electron microscopy investigations of the dynamics of nanoparticles in ultrathin liquids.

Pb deposition onto Au(111) from acidic chloroaluminate ionic liquid

Electrocrystallization of Bi on Au(111) in an Acidic Chloroaluminate Ionic Liquid

Electrodeposition of Sb on Au(111) from an Acidic Chloroaluminate Ionic Liquid: an in Situ STM Study

In situ STM investigation of spinodal decomposition and surface alloying during underpotential deposition of Cd on Au(111) from an ionic liquid.

Characterization of Heterostructural Palladium Deposition on Spherical Gold Nanoparticles by in Situ Liquid Cell Transmission Electron Microscopy

In Situ Raman Monitoring of Potential-Dependent Adlayer Structures on the Au(111)/Ionic Liquid Interface

Electronic Structure Evolution at DBBA/Au(111) Interface W/O Bismuth Insertion Layer

Copper Deposition on Au(111) in a Deep Eutectic Solvent: An In Situ STM Study**

STM tip-induced nanostructuring of Zn in an ionic liquid on Au(111) electrode surfaces

Effects of Monolayer Bi on the Self-Assembly of DBBA on Au(111)

A Novel Atomic Force Microscope Operating in Liquid for in Situ Investigation of Electrochemical Preparation of Porous Alumina.

Observation of a Surface Alloying-to-dealloying Transition During Growth of Bi on Ag(111)

Pits and Adatoms at the Interface of 1-Ml C-84/Ag (111)

In Situ Atomic Force Microscopic Studies of LiFSI-[Py1,4]FSI Interfacial Nanostructure on Au(111): Solid Electrolyte Interphase and Lithium Underpotential Deposition

Kinetic Studies of Underpotential Deposition of Antimony on Se-modified Au Electrode

Direct Observation of Single Atoms in Sinter-Resistant and Bimetallic Catalyst Systems Synthesized by Atomic Layer Deposition

The Creation of Nanostructures on an Au111 Electrode by Tip-Induced Iron Deposition from an Ionic Liquid.

Potential-Induced Phase Transition of N-Isobutyryl-L-cysteine Monolayers on Au (111) Surfaces