Abstract:The accurate prediction of heat transfer behavior in packed bed is of great importance to the design and operation of this kind of facility. In this paper, heat transfer between packed bed and adjacent wall in heat recovery processing is investigated theoretically and experimentally. A bed-to-wall heat transfer model is presented with consideration of two essential components including particle-to-wall contact heat transfer and heat conduction through the thermal penetration layer. Details of model parameter determination are provided. Through comprehensive sensitivity analysis of those parameters, it is shown that particle temperature, particle residence time and particle diameter are critical parameters to heat transfer coefficient. Besides, surface roughness, solid thermal conductivity and environmental gas species are all influencing factors of the overall heat transfer coefficient. In particular, a dimensionless particle residence time is introduced to characterize the combining effect of residence time, effective thermal conductivity and wall contact heat transfer. Meanwhile, a revised simplified formula for calculating particle contact heat transfer coefficient is correlated as well, which provides better prediction than the one widely adopted in previous studies. Furthermore, experimental heat transfer test on an industrial packed bed char cooler is performed for validating the model predicting capability in heat recovery process. The systematical test on a bench scale packed bed heat exchanger has also been carried out. Parametric analysis of the experimental data is consistent with the conclusions drawn from the model analysis section. The model provides good predicting accuracy on the overall heat transfer coefficient from the bench scale facility as well as data from the field test by correlating 95% of the measured data within ±20%. The implementation of the proposed model shows good prediction of heat transfer coefficient in packed bed for heat recovery purpose. It is recommended that the model can be applied in industrial design.

Analysis of Heat and Mass Exchange Performance of Enthalpy Recovery Wheel

Experimental and Numerical Analysis on Heat and Moisture Recovery Performance of Enthalpy Wheel with Condensation

Experimental and Numerical Analysis on Total Heat Recovery Performance of an Enthalpy Wheel under High Temperature High Humidity Working Conditions

Comparative Analysis on Temperature Swing Adsorption Cycle for Carbon Capture by Using Internal Heat/mass Recovery

Performance comparison between enthalpy recovery wheels and dehumidification wheels

Performance Comparison of Enthalpy Recovery Devices Using Liquid Desiccant and Desiccant Wheel

OPTIMIZATION ANALYSIS ON ENTHALPY RECOVERY DEVICE USING LIQUID DESICCANT

Performance Comparison of Different Total Heat Exchangers Applied for Waste Heat Recovery

Performance Analyzing Model for Fuel Cell System Enthalpy Wheel Humidifier

A Simulation Study of Heat and Mass Transfer in A Honeycombed Rotary Desiccant Dehumidifier

Novel Flue Gas Waste Heat Recovery System Equipped with Enthalpy Wheel

Theoretical and experimental analysis of bed-to-wall heat transfer in heat recovery processing

Frost Prevention Research of the Enthalpy Wheel in Air Conditioning Systems and Industrial Heat Recovery Systems

Energy and Exergy Study on Indirect Evaporative Cooler Used in Exhaust Air Heat Recovery

Irreversible Processes and Performance Improvement of Desiccant Wheel Dehumidification and Cooling Systems Using Exergy

The use of machine learning to determine moisture recovery in a heat wheel and its impact on indoor moisture

Simulation Analysis on the Fresh Air Handling Unit with Liquid Desiccant Total Heat Recovery

Thermodynamic analysis of desiccant wheel coupled to high-temperature heat pump system

Experimental Analysis and Performance Optimization of a Counter-Flow Enthalpy Recovery Device Using Liquid Desiccant

Energetic analysis of an air handling unit combined with enthalpy air-to-air heat exchanger

Monitoring the heating energy performance of a heat wheel in a direct expansion air handling unit