Abstract:Advances in Structural Engineering, Ahead of Print. In the engineering structures using circular steel tube (CST), the eccentric loading of CST members often occurs due to installation error and structural form. Existing research mainly focuses on the bearing resistance of circular steel pipes under the condition of eccentricity at one end. In practical application, both ends of CST members also may be eccentric. And with the increase in eccentricity, material yielding may occur prior to flexural buckling. So far, it's lack of reports about the mechanical behavior of CST members subjected to eccentric loading at both ends and the boundary between material yielding and flexural buckling. This paper presents experimental, numerical and theoretical studies on bearing resistance of thin-walled circular steel tube with slenderness ratio of 30, 40 and 50, subjected to eccentric loading at one end and both ends, respectively. The study reveals a significant discrepancy in the prediction of bearing resistance for circular tubes subjected to eccentric loading at both ends according to existing design codes. Considering the synthesis of bending moment and deflection caused by eccentric loading at both ends, the calculation method of the bearing resistance based on flexural buckling of CST is established, which enhances the prediction accuracy of test verification. In addition, a theoretical boundary between the two failure modes appearing in CST members under eccentric loading at one and both end(s) - flexural buckling and reaching the material yielding strength - was established as dominated by the slenderness ratio and loading eccentricity.

Additional Bending Moment of Thick-Walled Elliptical Tube under Internal Pressure

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Bending Strength of Thin-Walled Centrifugal Concrete-Filled Steel Tubes

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Mechanical Modeling of Tube Bending Considering Elastoplastic Evolution of Tube Cross-Section

Behavior of Thin-Walled Dodecagonal Section Double Skin Concrete-Filled Steel Tubes under Bending

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Experimental Investigation and Design of Thin- Walled Concrete-Filled Steel Tubes Subject to Bending

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Theoretical and Experimental Study on Load-Carrying Capacity of Combined Members Consisted of Inner and Sleeved Tubes

Elastoplastic torsional rigidity analysis of the centrifugal concrete- filled thin-wall steel tubes

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

EXPERIMENTAL STUDY OF THE BEARING CAPACITY OF INTERNAL|EXTERNAL FLANGE JOINTS SUBJECTED TO PRESSURE AND BENDING LOADINGS WITH VARIOUS ECCENTRICITIES

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Collapse of Thick Tubes under Combined Tension and Bending

Investigation on bearing resistance of thin-walled circular steel tube subjected to eccentric loading

Effect of Internal Pressure on Corner Radius and Thickness Distribution of Shear Hydro-Bending of 5a02 Aluminum Alloy Tube

Axial Stress Analysis for the Hydro Bending Process of Double-Layered Tube

Research on the axial elongation and springback law of thick-walled tubes in cold bending forming