Noise and Torsional Vibration Analysis of Hybrid Vehicles

Xiaolin Tang,Yanjun Huang,Hong Wang,Yechen Qin

DOI: https://doi.org/10.2200/s00888ed1v01y201811aat004

2018-01-01

Synthesis Lectures on Advances in Automotive Technology

Abstract:Abstract Thanks to the potential of reducing fuel consumption and emissions, hybrid electric vehicles (HEVs) have been attracting more and more attention from car manufacturers and researchers. Due...

What problem does this paper attempt to address?

Torsional vibration and acoustic noise analysis of a compound planetary power-split hybrid electric vehicle

Xiaolin Tang,Yongjun Jin,Jianwu Zhang,Liang Zou,Haisheng Yu

DOI: https://doi.org/10.1177/0954407013508276

2014-01-01

Abstract:Theoretical and experimental analyses of torsional vibrations and acoustic noise for a deep hybrid electric vehicle driveline including an electric, continuously variable transmission are carried out. The dynamic and mathematical models with 16 degrees of freedom in a matrix form are developed for the torsional vibration characteristics of the hybrid driveline. On the other hand, the noise sources of the hybrid electric vehicle powertrain excited in the pure electric mode and the hybrid drive mode are tested and measured using acoustic and speed sensors. The noise orders and the frequency domain responses are constructed using signal treatment and torsional vibration analysis. The theoretical predictions for the natural frequencies and the corresponding vibration modes of the hybrid driveline are presented. The noise test results are also given in accordance with the torsional vibration modes of the hybrid driveline in the pure electric mode and the hybrid drive mode. The noise sources due to the self-excited and frequency-multiplied vibrations are found, focusing on the compound planetary gear set in the power-split electric, continuously variable transmission.
Noise and vibration suppression in hybrid electric vehicles: State of the art and challenges

Yechen Qin,Xiaolin Tang,Tong Jia,Ziwen Duan,Jieming Zhang,Yinong Li,Ling Zheng

DOI: https://doi.org/10.1016/j.rser.2020.109782

IF: 16.799

2020-05-01

Renewable and Sustainable Energy Reviews

Abstract:<p>The need for more efficient and renewable means of transport makes the development of hybrid electric vehicles (HEVs) an important topic for both automobile manufacturers and academic researchers. Noise, vibration, and harshness (NVH) of a vehicle are important factors for vehicle users and essential for successful commercialization of this vehicle type. This paper is a compact state-of-the-art review of both NVH characteristics and relevant suppression methods for HEVs. The NVH-related problems are categorized into three categories: engine, powertrain, motor-related. A detailed overview of each category/problem-type is provided, the NVH-suppression methods for different types of HEVs are introduced, and their respective advantages discussed. In addition, emerging developments and ideas for future improvements are summarized. As a result, the paper should be particularly helpful for researchers, who are interested in the development of high-performance HEVs that can provide both substantially improved ride-comfort and reduced energy-consumption.</p>

energy & fuels,green & sustainable science & technology
Analyses on the Torsional Vibration and Noise of Transmission System in Hybrid Electric Cars

Liang Zou,Xiaolin Tang,Haisheng Yu,Tong Zhang,Jianwu Zhang

DOI: https://doi.org/10.19562/j.chinasae.qcgc.2014.06.014

2014-01-01

Abstract:Aiming at the vibration and noise problem of transmission system in a deep hybrid electric vehi-cle, the torsional vibration analysis and noise test of its transmission system are carried out with noise source identi-fied. Based on the equivalent shafts model for gear pairs with consideration of engagement stiffness, dynamic models for the torsional vibration of compound planetary gear sets and transmission system are established. The natural fre-quencies and mode shapes of transmission system are analyzed and compared with the results of noise test. The re-sults demonstrate that the source of noise in transmission system is the engagement of gear pairs while its important cause is torsional vibration.
Analysis of Vibration of Fuel Cell Car's Traction Motor and the Influence to Interior Noise

CAI Jian-Jiang,ZUO Shu-guang,YAN Jiao,FENG Qing

DOI: https://doi.org/10.3969/j.issn.1006-1355.2008.02.006

2008-01-01

Abstract:Through a fuel cell car vibro-acoustic experiment the interior noise and some components' vibration levels in different operating condition are measured.The results show that while the traction motor's contribution to the interior noise becomes more dominated with the increase of the vehicle's speed.The driving motor and subframe coupling dynamic model is established in ADAMS,the mode of the mount system with rigid and flexible subframe are calculated.The results show that the modal frequency of the mount system will be reduced if the subframe is elastic.
Analysis of Noise and Vibration for a New Pure Electrical Vehicle

He Lv-Chang,Zuo Shu-Guang,He Rong,Chen Rui-Feng

DOI: https://doi.org/10.1109/icacte.2010.5578981

2010-01-01

Abstract:In the four-wheel tumbler test bench of semi-freedom noise elimination chamber,test the noise and vibration characteristics of a new pure electrical automobile (PURE EV), and collect noise and vibration signals of moving parts in different speeds. Analyze the frequency distribution of internal noise and vibration. The signal analysis shows noise sources of interior are change as the increase in speeds. At low speeds, the noise radiated by differential is the main source; while at the high speeds, noise radiated by motor is the main source. And the vibration sources of interior are derived from the motor and wheels vibration respectively when at low and high speeds. Finally, present vibration and noise reduction methods according to the structure features of passenger car.
Numerical and Experimental Investigations of Noise and Vibration Characteristics for a Dual-Motor Hybrid Electric Vehicle.

Chuan Hu,Xiaolin Tang,Liang Zou,Kai Yang,Yinong Li,Ling Zheng

DOI: https://doi.org/10.1109/access.2019.2919113

IF: 3.9

2019-01-01

IEEE Access

Abstract:This paper investigates the abnormal noise and vibration of a hybrid electric vehicle during the electric-only driving mode. The sources of the noise and vibration are first identified through the frequency analysis, and then several measures are implemented to reduce the noise and vibration level. The experimental results have identified the gear meshing in the compound planetary gear set is the main source of the noise and vibration. The theoretical analysis demonstrates that gear pairs of the short planet-small sun gear and short planet-long planet in the compound planetary gear set contribute to the main noise and vibration of the hybrid system in the electric-only driving mode. This research also shows that the gear-meshing noise level in the compound planetary gear set can be decreased significantly by matching the engagement parameters, such as meshing stiffness, tooth error, and pitch error. The observation results in this paper are able to provide a practical reference for improving the ride comfort of hybrid electric vehicles in the future study.
Multi-Body Dynamics and Noise Analysis for the Torsional Vibration of A Power-Split Hybrid Driveline

Jianwu Zhang,Xiaolin Tang,Haisheng Yu,Liang Zou

DOI: https://doi.org/10.1177/1464419314540152

2014-01-01

Abstract:Two dynamic models are established to study the torsional vibration and noise characteristics of a power-split hybrid driveline. One is developed using mathematical rotational motion of the driveline components in matrix form. The other dynamic model of the hybrid driveline is built in the multi-body dynamic software ADAMS. The natural frequencies and vibration modes computed from the two methods show a remarkable agreement. Moreover, the noise source identification for the power-split hybrid driveline is also undertaken according to the acoustic measures on the test bench. This study can provide a valuable reference to the development of hybrid electric vehicle in the future.
Analysis and control of low-speed torsional vibration in electric vehicle powertrain and driveline systems

Meng Dejian,Pan Jianfeng,Zhang Lijun,Yu Zhuoping

2017-01-01

Abstract:Research and/or Engineering Questions/Objective (max. 100 words) Electric vehicles have been widely used in China on account of its advantages of energy conservation and environment protection. According to the complaints of customers, one of the important problems is the NVH problem under the condition of low vehicle speed. The research purpose of this study is observe the vibration characteristics and find the control methods for the torsional vibration of powertrain and driveline systems.
Experimental Analysis on Noise and Vibration of Electric Drive System Focusing on Order Contribution Ratio

Mingxin Jin,Shuguang Zuo,Lei Shi,Qingshao Mao

DOI: https://doi.org/10.4271/2024-01-2339

2024-01-01

Abstract:In the process of automobile industrialization, integrated electric drive systems turn to be the mainstream transmission system of electric vehicles gradually. The main sources of noise and vibration in the chassis are from the gear reducer and motor system, as a replacement of engine. For improving the electric vehicles NVH performance, effective identification and quantitative analysis of the main noise sources are a significant basis. Based on the rotating hub test platform in the semi-anechoic chamber, in this experiment, an electric vehicle equipped with a three-in-one electric drive system is taken as the research object. As well the noise and vibration signals in the interior vehicle and the near field of the electric drive system are collected under the operating conditions of uniform speed, acceleration speed, and coasting with gears under different loads, and the test results are processed and analyzed by using the spectral analysis and order analysis theories. Combining the traditional analysis method above, an evaluation process method focusing on the order contribution ratio is proposed, which is employed to quantitatively analyze the main noise sources and guide the focus of noise reduction. The results indicated that the main order contribution sources of noise are the 21st and 42nd orders from the first-stage gear, and the 48th order from the motor. In addition, it is also relatively prominent that the switching frequency component of the inverter in the signal within low-rotational speed. In the speed range of 1000-9600 rpm, the peak value of vibration energy and its change tendency caused by load can be effectively reflected by high contribution proportion of specific orders. It is concluded that the proposed method is equipped to extracting the key sources of vibration problems under various working conditions.
Experimental Investigation Into Starting Noise and Vibration of an Engine Used in Hybrid Electric Vehicle

Zhang Lijun,Ye Yin,Yu Zhuoping

DOI: https://doi.org/10.3969/j.issn.1000-3703.2009.03.008

2009-01-01

Abstract:Noise and vibration test in cold start condition was carried out for engine of a hybrid electric vehicle,during this test engine block vibration acceleration,engine noise,cylinder pressure,ignition pulse signal and revolution signal were measured,and engine starting noise and vibration characteristics were analyzed in the transient state of engine starting.The test results indicate that the engine starting noise and vibration signal reveal distinct non-steady characteristic,and the amplitude is greater than at idle speed;in addition,the high-frequency vibration and noise is not closely related with fluctuation of cylinder pressure at low frequency,possibly correlated with fluctuation of high-frequency torque that drives the motor.
Noise Analysis of a Power-split Hybrid Electric Vehicle Driveline

Huang Xiaoci,Tang Xiaolin,Yu Haisheng

DOI: https://doi.org/10.16578/j.issn.1004.2539.2013.11.010

2013-01-01

Abstract:Taking a power-split hybrid electric vehicle as study object,the speed characteristics of the HEV are analyzed and the noise sources of the HEV under differentmodes are identified through noise experimental analysis.Furthermore,the three dimension contact dynamics model of the gear pairs of compound planetary gear set are set and 3-D contact dynamic characteristic is studied.The noise test demonstrates that the engagement of gear pairs in the compound planetary gearsetis mainly causes the noise in electric-only drivingmode,and the engagement of gear ring and reducer gear and engine noise is the mainly noise in hybrid driving mode,the regularity of dynamic parameters that vary with meshing positions,including contact stress,meshing force,meshing area etc are obtained by the dynamic contact analysis.The research results provide a basis for noise reducing,strength checking and dynamic characteristic optimization of compound planetary set.
A Novel Simplified Model for Torsional Vibration Analysis of a Series-Parallel Hybrid Electric Vehicle

Xiaolin Tang,Wei Yang,Xiaosong Hu,Dejiu Zhang

DOI: https://doi.org/10.1016/j.ymssp.2016.08.020

IF: 8.4

2017-01-01

Mechanical Systems and Signal Processing

Abstract:In this study, based on our previous work, a novel simplified torsional vibration dynamic model is established to study the torsional vibration characteristics of a compound planetary hybrid propulsion system. The main frequencies of the hybrid driveline are determined. In contrast to vibration characteristics of the previous 16-degree of freedom model, the simplified model can be used to accurately describe the low-frequency vibration property of this hybrid powertrain. This study provides a basis for further vibration control of the hybrid powertrain during the process of engine start/stop.
The Test Analysis of Internal Noise Characteristics of the Fuel Cell Passenger Car

Yan Jiao,Zuo Shuguang,Chen Yousong,Guo Rong

DOI: https://doi.org/10.3969/j.issn.1000-3703.2006.05.009

2006-01-01

Abstract:In the four-wheel tumbler test bench of semi-freedom noise elimination chambertest the sound and vibration characteristics of fuel cell passenger carand collect internal noise signals and vibration acceleration signals of moving parts with different speeds.Analyze the distribution of internal noise and main frequency ingredient with different speed.The signal analysis shows that the noise comes from drive motor assembly and hydrogen pump?fan in fuel cell system the noise directly transmits into cab through airat the same time arises the vibration of floor and radiates noise into the vehicle. Present vibration and noise reduction methods according to the structure feature of passenger car.
Experimental analysis for the interior noise characteristics of the fuel cell car

Zuo Shuguang,Yan Jiao

DOI: https://doi.org/10.1109/ICVES.2006.371591

2006-01-01

Abstract:A vibro-acoustic test to a prototype of fuel cell car in various operating conditions is taken on the four -wheel-drive chassis dynamometer in the semi-anechoic chamber. And we collect sound signal of the interior noise and the vibration signal of body panels and some parts radiating noise of the fuel cell car. Through analyzing the test data, the characteristics and sources of interior noise are identified. The sound pressure level at the driver right ear position is always lower than the one of passenger right ear position, but the difference of the two noise decreases with vehicle's speed increase. The assembly unit of traction motor of the vehicle and the hydrogen-pump and fan of the fuel cell system are the main sources of interior noise, which partly due to the air-borne noise and partly to the structure-borne noise. The traction motor's contribution to the interior noise becomes more and more dominating with the vehicle's speed increase. © 2006 IEEE.
Research and Simulation Analysis of Fuel Cell Vehicle Interior Noise

FENG Qing,LU Yong,ZUO Shu-guang,CHEN You-song

DOI: https://doi.org/10.3969/j.issn.1672-0032.2008.01.001

2008-01-01

Abstract:The acoustic-structure coupled finite element model with several subsystems is built.With the boundary conditions of hydric pump and electric motor vibration spectrum,the frequency response analysis is calculated and the peak frequency is inosculated with the measured value.After the panel contribution analysis of the coupled model is calculated,the part which has great effect on the low frequency interior noise is found out.After its panel parameter optimization and structure refinement,the interior noise is reduced.
Noise, Vibration and Harshness of Electric and Hybrid Vehicles

Zhang Lijun,Meng Dejian,Chen Gang

DOI: https://doi.org/10.4271/9780768099645

2020-01-01

Abstract:The noise, vibration, and harshness (NVH), also known as noise and vibration (N&V), is a critical feature for customers to assess the performance and quality of vehicles. NVH characteristics are higher among factors that customers use to judge the vehicle's quality.This book sets out to introduce the basic concepts, principles, and applications of the NVH development and refi nement of Battery Electric Vehicles (BEV), Hybrid Electric Vehicles (HEV), and Fuel Cell Electric Vehicles. Each type comes with its own set of challenges.
Natural and Forced Vibration of Hybrid Electric Vehicle Powertrain

Liu Hui,Zhang Shuo,He Wei,Han Li-jin

DOI: https://doi.org/10.4028/www.scientific.net/amm.448-453.3141

2013-01-01

Applied Mechanics and Materials

Abstract:In this paper, the natural vibration characteristics of a hybrid vehicle powertrain are simulated. The nonlinear dynamic model is proposed by using the lumped parameter method, and the dynamic response characteristics of the powertrain with a wide range change of engine speed and torque are studied. The conclusions provide the basis for the system design and control strategies constituting of hybrid vehicle powertrain.
The Current Situation And Future Trends In Electric Vehicle Vibration And Noise Problem Investigation

Yuan Chen,Jingdong Zhou,Tao Huang,Minggang Zhou,Guangyou Yang,Daoyuan Yu

DOI: https://doi.org/10.1504/IJEHV.2013.056292

2013-01-01

International Journal of Electric and Hybrid Vehicles

Abstract:With the rapid development of the electric vehicle (e-vehicle) technology and its widespread application, the corresponding problem of noise and vibration attracts the rising professional attention. This paper is devoted to the analysis of the e-vehicle noise and vibration issues in comparison with vehicles with the conventional Internal Combustion Engines (ICEs). It specifically concerns the measures of increasing the Noise Vibration Harshness (NVH) index, safety, and acoustic characteristics for e-vehicles. The current technologies and future trends in the sphere of e-vehicle noise and vibration control have also been discussed.
Analysis on Torsional Vibration Characteristics of Hybrid Powertrain

Zhifei Zhang,Fengjian Sun,Zhongming Xu,Yansong He,Yi Yang

DOI: https://doi.org/10.19562/j.chinasae.qcgc.2015.05.011

2015-01-01

Abstract:The powertrain of hybrid electric vehicle ( HEV ) exhibits new features in torsional vibration characteristics, compared with that of conventional vehicles. In this paper, lumped mass parameter method is adopt-ed to set up a torsional vibration analysis model with AMEsim for the powertrain of a torque-coupling type HEV, and the natural characteristics of powertrain torsional vibration are calculated with its modes of main orders analyzed. Based on PI control parameters introduced in motor control system of HEV and torsional vibration analysis model, the effects of gain parameters of PI control on the natural characteristics of powertrain are studied. The results show that the variation of proportional parameter may change the modal damping ratio while integral parameter may affect the rigid body modes of powertrain, leading to the changes in low-order frequencies and mode shapes of torsional vi-bration.
Torsional Vibration Analysis and Optimisation of a Hybrid Vehicle Powertrain

Bowen Ruan,Guangqiang Wu

DOI: https://doi.org/10.1504/ijvp.2023.10055648

2023-01-01

International Journal of Vehicle Performance

Abstract:Aiming at a dual-motor torque coupling hybrid vehicle, its powertrain model is established by using the lumped mass method, and an engine transient torque model based on cylinder pressure is established to analyse its natural characteristics and torsional vibration response under typical working modes. Then, the sensitivity analysis of the main parameters of the powertrain such as flywheel inertia is carried out. Based on the analysis results, the multi-objective genetic algorithm is used to optimise the parameters of the powertrain. The results show that the optimised parameters can reduce the peak second-order angular acceleration of the transmission input shaft by 25.93% and 8.06%, and reduce the peak second-order angular acceleration of the driving wheel by 32.72% and 35.14% in two working modes.

Noise and Torsional Vibration Analysis of Hybrid Vehicles

Torsional vibration and acoustic noise analysis of a compound planetary power-split hybrid electric vehicle

Noise and vibration suppression in hybrid electric vehicles: State of the art and challenges

Analyses on the Torsional Vibration and Noise of Transmission System in Hybrid Electric Cars

Analysis of Vibration of Fuel Cell Car's Traction Motor and the Influence to Interior Noise

Analysis of Noise and Vibration for a New Pure Electrical Vehicle

Numerical and Experimental Investigations of Noise and Vibration Characteristics for a Dual-Motor Hybrid Electric Vehicle.

Multi-Body Dynamics and Noise Analysis for the Torsional Vibration of A Power-Split Hybrid Driveline

Analysis and control of low-speed torsional vibration in electric vehicle powertrain and driveline systems

Experimental Analysis on Noise and Vibration of Electric Drive System Focusing on Order Contribution Ratio

Experimental Investigation Into Starting Noise and Vibration of an Engine Used in Hybrid Electric Vehicle

Noise Analysis of a Power-split Hybrid Electric Vehicle Driveline

A Novel Simplified Model for Torsional Vibration Analysis of a Series-Parallel Hybrid Electric Vehicle

The Test Analysis of Internal Noise Characteristics of the Fuel Cell Passenger Car

Experimental analysis for the interior noise characteristics of the fuel cell car

Research and Simulation Analysis of Fuel Cell Vehicle Interior Noise

Noise, Vibration and Harshness of Electric and Hybrid Vehicles

Natural and Forced Vibration of Hybrid Electric Vehicle Powertrain

The Current Situation And Future Trends In Electric Vehicle Vibration And Noise Problem Investigation

Analysis on Torsional Vibration Characteristics of Hybrid Powertrain

Torsional Vibration Analysis and Optimisation of a Hybrid Vehicle Powertrain