Abstract:Lead-free film dielectric capacitors with fast charge/discharge capability are very attractive for advanced pulsed power capacitors but lag behind in energy storage density. Here, simultaneously achieving high energy storage density and good thermal stability in a new lead-free relaxor ferroelectric multilayer film is proposed by combining the amplifying effect of electric field with interlayer coupling. The 0.7Na(0.5)Bi(0.5)TiO(3)-0.3SrTiO(3) (0.7NBT-0.3ST) system with large polarization and 0.6SrTiO(3)-0.4Na(0.5)Bi(0.5)TiO(3) (0.6ST-0.4NBT) system with high breakdown strength are chosen to form a multilayer film. On the one hand, in our previous work, it was demonstrated that these systems exhibit excellent energy performance. And due to the large difference in dielectric constants between the two systems, constructing multilayer films can realize the amplifying effect of electric field and then increase the breakdown strength. On the other hand, since the compositions of the two systems are similar, the dislocations at the interface can be significantly reduced. The results show that the multilayer films possess slim and tilted polarization-electric field hysteresis loops characterized by small remnant polarization and large maximum polarization. An ultrahigh energy storage density of 60 J cm(-3) is obtained under 2612 kV cm(-1) at room temperature in the 0.7NBT-0.3ST/0.6ST-0.4NBT multilayer film. Meanwhile, the new developed capacitor exhibits a wide temperature usage range between 20 and 180 degrees C, with less than 5% variation in energy storage density. These characteristics demonstrate that the 0.7NBT-0.3ST/0.6ST-0.4NBT multilayer film is a promising candidate for high-power energy storage applications.

Interlayer coupling to enhance the energy storage performance of Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>–SrTiO<sub>3</sub> multilayer films with the electric field amplifying effect

Interlayer coupling to enhance the energy storage performance of Na0.5Bi0.5TiO3–SrTiO3 multilayer films with the electric field amplifying effect

Interlayer Coupling Enhanced Energy Storage Performance in a Flexible BMT-BTO/BMT Multilayer Ferroelectric Film Capacitor.

A slush-like polar structure for high energy storage performance in a Sr<sub>0.7</sub>Bi<sub>0.2</sub>TiO<sub>3</sub> lead-free relaxor ferroelectric thin film

Enhanced Energy Storage Properties in Lead-Free (Na 0.5 Bi 0.5 ) 0.7 Sr 0.3 TiO 3 -Based Relaxor Ferroelectric Ceramics through a Cooperative Optimization Strategy

Improved energy storage performance achieved in Na0.5Bi0.5TiO3-based ceramics with good thermal stability at low electric field

Excellent Energy Storage and Photovoltaic Performances in Bi0.45Na0.45Ba0.1TiO3-Based Lead-Free Ferroelectricity Thin Film

A Slush-Like Polar Structure for High Energy Storage Performance in a Sr0.7Bi0.2TiO3 Lead-Free Relaxor Ferroelectric Thin Film

<sub>???????</sub>???????Enhanced Energy Storage Performance in Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-Sr<sub>0.7</sub>Bi<sub>0 .2</sub>TiO<sub>3</sub> Relaxor Ferroelectric Thin Films by Entropy Design

Enhanced Energy Storage Performance in Na 0.5 Bi 0.5 TiO 3 -Sr 0.7 Bi 0.2 TiO 3 Relaxor Ferroelectric Thin Films by Entropy Design

Enhancement of energy storage properties of Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-based relaxor ferroelectric under moderate electric field

Enhanced Energy Storage Performance in Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-Sr<sub>0.7</sub>Bi<sub>0.2</sub>TiO<sub>3</sub> Relaxor Ferroelectric Thin Films by Entropy Design

Improved Energy Storage Performance Achieved in (Bi0.5na0.5)tio3-Based Relaxor Ferroelectrics Via Composition Engineering

Increasing Energy Storage Capabilities of Space-Charge Dominated Ferroelectric Thin Films Using Interlayer Coupling

Defect Dipole Induced Large Recoverable Strain and High Energy-Storage Density in Lead-Free Na0.5Bi0.5TiO3-based Systems

Medium-entropy relaxor ferroelectric (Bi0.7Na0.67Li0.03)0.5Sr0.3TiO3 thin film for energy storage

Enhanced comprehensive energy storage properties in Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramics under a moderate electric field

Enhancement of energy storage properties of Bi 0.5 Na 0.5 TiO 3 -based relaxor ferroelectric under moderate electric field

Energy storage performance of Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-based relaxor ferroelectric ceramics with superior temperature stability under low electric fields

Optimized Energy Storage Performance of SBT-based Lead-Free Relaxor Ferroelectric Thin Film

Toward high-end lead-free ceramics for energy storage: Na0.5Bi0.5TiO3-based relaxor ferroelectrics with simultaneously enhanced energy density and efficiency