Abstract:Dielectric thin film capacitors have attracted immense attention in modern pulsed power electronic systems as essential energy-storage components. Nevertheless, there are still a lot of challenges in realizing high recoverable energy densities and efficiencies. Herein, an effective strategy is proposed to achieve an enhanced energy storage performance by increasing atomic configuration entropy and grain refining, through incorporation of multifarious heterovalent cations in A sites. By including Sr0.7Bi0.2TiO3 (SBT) into Na0.5Bi0.5TiO3 (NBT) ferroelectric, slender polarization-electric field hysteresis loops with delayed polarization saturation are realized in the intermediate compositions. The introduction of SBT in NBT increases the heterogeneity of the multivalent cations in A-sites and the atomic configuration entropy along with the existence of atomic disorder and lattice distortion, resulting in grain refining and smaller nanodomains, which enhances the relaxation characteristics and suppresses the early polarization saturation. While further addition of SBT decreases the atomic configuration entropy and the degree of atomic disorder and lattice distortion, the sizes of grains and nanodomain increase, and thus the remnant polarization increases, leading to decreased energy density and efficiency. Finally, 0.4NBT-0.6SBT thin films obtain an enhanced recoverable energy storage density of 63 J/cm(3) and an energy storage efficiency of 68%. Moreover, excellent thermal stability (from 20 to 220 ?) and strong fatigue endurance (up to 10(7) cycles) are achieved. These results demonstrate a heuristic strategy to design high-performance dielectric materials by increasing the atomic configuration entropy.

A Slush-Like Polar Structure for High Energy Storage Performance in a Sr0.7Bi0.2TiO3 Lead-Free Relaxor Ferroelectric Thin Film

A slush-like polar structure for high energy storage performance in a Sr<sub>0.7</sub>Bi<sub>0.2</sub>TiO<sub>3</sub> lead-free relaxor ferroelectric thin film

Improving Energy Storage Properties in (ba0.75sr0.1bi0.1)(ti0.9zr0.1)o3 Ceramic Thick Films by Adding (sb0.5li0.5)tio3, Domain Engineering and Defect Engineering

Large recoverable energy storage density and efficiency in PbZrO3-xSrTiO3 thin films with polymorphic nanodomains

Optimized Energy Storage Performance of SBT-based Lead-Free Relaxor Ferroelectric Thin Film

Polarization behavior of` lead-free 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 thin films with enhanced ferroelectric properties

Structure Regulation and Performance Optimization Mechanism of Sr0.7Bi0.2TiO3-based Energy Storage Ceramics Based on Charged Defect Design Engineering

Interlayer coupling to enhance the energy storage performance of Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>–SrTiO<sub>3</sub> multilayer films with the electric field amplifying effect

High Energy-Storage Density of Lead-Free (Sr1-1.5Xbix)ti0.99mn0.01o3 Thin Films Induced by Bi3+-VSr Dipolar Defects.

Achieving Ultrahigh Energy-Storage Density with Excellent Thermal Stability in Sr0.7Bi0.2TiO3-Based Relaxors Via Polarization Behavior Modulation

<sub>???????</sub>???????Enhanced Energy Storage Performance in Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-Sr<sub>0.7</sub>Bi<sub>0 .2</sub>TiO<sub>3</sub> Relaxor Ferroelectric Thin Films by Entropy Design

Enhanced Energy Storage Performance in Na 0.5 Bi 0.5 TiO 3 -Sr 0.7 Bi 0.2 TiO 3 Relaxor Ferroelectric Thin Films by Entropy Design

Enhanced Energy Storage Performance in Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-Sr<sub>0.7</sub>Bi<sub>0.2</sub>TiO<sub>3</sub> Relaxor Ferroelectric Thin Films by Entropy Design

Deciphering the atomic-scale structural origin for large dynamic electromechanical response in lead-free Bi0.5Na0.5TiO3-based relaxor ferroelectrics

High Energy Storage Density Achieved in Bi3+-Li+ Co-Doped SrTi0.99Mn0.01O3 Thin Film Via Ionic Pair Doping-Engineering

Ultrahigh Energy Storage and Electrocaloric Performance Achieved in SrTiO3 Amorphous Thin Films Via Polar Cluster Engineering

Structure, Dielectric and Relaxor Properties of Sr0.7Bi0.2TiO3K0.5Bi0.5TiO3 Lead-Free Ceramics for Energy Storage Applications

Aliovalent Doping Engineering to Synergistically Optimize the Energy Storage Properties of Sr0.7Bi0.2TiO3-based Linear-Like Relaxor Ferroelectric Ceramics

(Bi0.5Na0.5)TiO3-based relaxor ferroelectrics with medium permittivity featuring enhanced energy-storage density and excellent thermal stability

High Energy Storage Capacity, Heterogeneous Domain Structure and Stabilization of Intermediate Phase in PbZrO3-based Antiferroelectric Single Crystals

Defect Dipole Induced Large Recoverable Strain and High Energy-Storage Density in Lead-Free Na0.5Bi0.5TiO3-based Systems