Abstract:Abstract Composite gas cylinders, as an important hydrogen storage device for hydrogen fuel cell vehicles, require a hydrostatic test to ensure safe usage and service. However, there is a lack of a non-contact and efficient method to monitor the deformation of the gas cylinders during the hydrostatic testing. Thus, this paper proposes a radial displacement measurement method based on binocular fringe projection profilometry (BFPP) for pressurized hydrogen storage cylinders. We use BFPP as a highly sensitive three-dimensional (3D) shape measuring method, where the shape information that encoded in the deformed light pattern is acquired based on phase demodulation and coordinate reconstruction. Combining with 3D morphology measurement technology, internal pressure loading tests were conducted on a composite overwrapped pressure vessel with 55 Litre and 35MPa design pressure. Firstly, a large-field BFPP system was constructed to collect 3D point cloud data of the surface of the cylinder at different internal pressures. Then, a cylinder fitting based on the least squares method was used to obtain the radius. Finally, the difference of radius between pressure load steps was calculated, which indicates the radial displacement of the gas cylinder at different internal pressures. The measured result shows a good agreement with FEA calculations, where the radial displacement increase linearly with the increment of inner pressure. The error ranges from 2% to 18%.

The Non-contact Precision Measurement for Spherical Metrology Tank

The non-contact precision measurement and noise reduction method for liquid volume metrology

Research on 3D laser scanning method for tank volume metrology and its comparison experiment analysis

A Novel Radius Measurement Method for Vertical Oil Tank Based on Laser Tracking and Wall-Climbing Robot.

Precise Measurement on Form of Horizontal Tank Used for Liquid Volume Metrology by Laser Scanning Method

Precise Measurement of Liquid Petroleum Tank Volume Based on Data Cloud Analysis

Research on tank volume metrology for petroleum and liquid petroleum products based on 3D laser scanning method

Study on Automatic Volumetric Comparison Method for Horizontal Cylindrical Tank Calibration on the Spot

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Error impact analysis and experimental research for absolute testing of spherical surfaces

Study on Vertical Liquid Petroleum Tank Volume Measurement Method Based on Data Cloud Analysis

Study on 3D Laser Scanning Method for Horizontal Tank Volume Measurement

Error Analysis Of Spherical Ultra-Precision Measurement

Radial Displacement Measurement of Hydrogen Storage Cylinders under Internal Pressure Based on Fringe Projection Profilometry

Measurement Method for Vertical Tank Deformation Based on Laser Scanning Principle.

Research on Course Radius Measurement for Vertical Petroleum Tank Volume Metrology Based on 3D Laser Scan Principle

Study on Internal Electro-optical Measuring Method For Horizontal Tank Volume Measurement

Automatic Measurement System for Vertical Tank Volume by Electro-Optical Distance-Ranging Method

On-site Measurement of Sphericity Based on High-Precision Sphere Grinder

Research and Application on Radial Deviation Measuring for Vertical Tank Volume Measurement Base on Wall-climbing Robot

Evaluation of Longitud Sphericity Error Measurement