Abstract:In the traditional calculation model of mesh stiffness, the tooth root crack is commonly assumed to be in a closed state. However, the gear tooth crack will open under the action of mesh force in the meshing process, the mesh stiffness of the cracked tooth and the dynamic response of gear system is thus different from the closed crack case. There almost no studies have been done to investigate the influence of tooth crack open state on mesh stiffness and dynamic response. Thus, this paper presents an improved mesh stiffness calculation model of the cracked gear, in which the effective compression section and the neutral layer of the cracked tooth are re-evaluated considering the crack opening state. Then, the accuracy of the proposed model is verified by the finite element method (FEM), and the differences of mesh stiffness and statistical indicators of the dynamic response between the proposed and traditional models are further studied. The mesh stiffness calculation results show that the proposed model achieves a higher accuracy than the traditional model. And its precision gradually increases as the crack grows, which can be improved by 2.35% in the case of large crack (48.38% crack) when compared to the traditional model. The fault response signal obtained from the traditional model yields a larger amplitude than the actual situation, which will lead to errors of the statistical indicators used for fault diagnosis, in particular, the RMS value can be up to an average percentage difference of 11.98% under the large crack (48.38% crack). It is concluded that the proposed model has a higher accuracy for calculating the mesh stiffness of the cracked gear and can be further used to serve the fault diagnosis and detection of the gear system.

Research on Problems of Fracture Mechanics about the Spur Gears with Cracked Tooth

Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position

Vibration characteristic analysis of spur gear systems under tooth crack or fracture

Analysis of Gear Crack’s Influence on Mesh Stiffness

Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair

Analysis on the Internal Dynamics Excitation of Gear Mesh with the Crack Fault

Analysis of Tooth Root Crack Initiation, Propagation and Fracture Surface Based on Gear Bending Fatigue Test

Dynamic Characteristics of Gear System Under Compound Fault of Tooth Root Crack and Bearing Outer Ring

THE DYNAMIC MODELLING OF A SPUR GEAR IN MESH INCLUDING FRICTION AND A CRACK

Loaded Tooth Contact Analysis and Meshing Stiffness Calculation for Cracked Spiral Bevel Gears

Molecular dynamics simulation of crack initiation and propagation in bcc iron under load within spur gear tooth root

Analytical models of mesh stiffness for cracked spur gears considering gear body deflection and dynamic simulation

Mesh stiffness modelling and dynamic simulation of helical gears with tooth crack propagation

An improved dynamic model of spur gears considering delayed meshing out of the contact point due to root crack

Improved analytical model for mesh stiffness calculation of cracked helical gear considering interactions between neighboring teeth

Research on Root Strain Response Characteristics of Inner Ring of Planetary Gear Transmission System with Crack Fault

Dynamic feature and response analysis on the gear tooth root crack in planet gear

Mesh Stiffness Modeling and Dynamic Simulation of Spur Gears with Body Crack under Speed Fluctuation Condition

Contribution of friction-induced vibration to the realistic failure analysis of spur gear cracked teeth

Improved Mesh Stiffness Method and Vibration Analysis of a Planetary Gear System with a Spatial Tooth Crack

Dynamic Simulation of Cracked Spiral Bevel Gear Pair Considering Assembly Errors