Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. To reveal the influence of component cracks on the dynamic load-sharing characteristics of the herringbone gear planetary system (HGPS), a 55-DOF bending-torsional-axial-pendular (BTAP) nonlinear dynamic model of the system was constructed, taking into account parameters of different crack degrees (depth, angle, length), as well as factors such as manufacturing error (ME) and installation error (IE), time-varying mesh stiffness (TVMS), time-varying support stiffness, damping, and friction. The TVMS model of components with cracks was established using the cumulative potential energy method, and the mathematical quantification relationship between different crack parameters and TVMS was studied. Based on the theory of elastohydrodynamic lubrication (EHL), calculate the time-varying friction coefficient and friction force of each gear pair. Using the nonlinear elastic theory of rolling elements and raceways, the time-varying support stiffness of each component is obtained. Using the Runge-Kutta numerical integration method to solve the dynamic differential equations, and analyzed the load-sharing characteristics and sensitivity influence law of the system when the sun gear, planetary gear, and internal gear ring contain cracks respectively. Built a vibration test bench for the HGPS with cracks, and the experimental results were compared with the theoretical results. The results show that as the crack intensifies, the TVMS value decreases at the crack tooth. When the sun gear contains cracks, there will be obvious protruding excitation in the system's load-sharing curve, and the internal meshing load-sharing characteristics are better than the external meshing load-sharing characteristics. At the same time, as the degree of cracks increases, the system load-sharing characteristics first improve and then deteriorate. At the same crack, as manufacturing and installation errors increase, the load-sharing characteristics of the internal and external meshing pairs deteriorate. When the internal gear ring contains cracks, the dynamic load-sharing coefficients of the internal and external meshing pairs of the system are 7.96 and 4.10, respectively, which have the highest impact on the dynamic load-sharing coefficient and sensitivity of the internal and external meshing pairs of the system. The experimental results are consistent with the theoretical results, verifying the correctness of the model.

Dynamic Simulation of Cracked Spiral Bevel Gear Pair Considering Assembly Errors

Mesh characteristic changes of spiral bevel gear pair with assembly errors during tooth crack propagation

Dynamic Characteristics of Spur Gear System with Tooth Root Crack Considering Gearbox Flexibility

Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair

An improved dynamic model of spur gears considering delayed meshing out of the contact point due to root crack

Investigation on meshing characteristics of spiral bevel gear under wear fault evolution with assembly errors

Mesh Stiffness Modeling and Dynamic Simulation of Spur Gears with Body Crack under Speed Fluctuation Condition

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles

Dynamic modelling and analysis of cracked gear system with tip relief based on proposed variable-angle deformation energy integration method

Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position

Dynamic Analysis of Planetary Gear with Root Crack in Sun Gear Based on Improved Time-Varying Mesh Stiffness

Dynamic modeling and analysis of multistage planetary gear system considering tooth crack fault

Mesh characteristic analysis and dynamic simulation of spur gear pair considering corner contact and tooth broken fault

Improved Mesh Stiffness Method and Vibration Analysis of a Planetary Gear System with a Spatial Tooth Crack

Fault feature analysis of planetary gear set influenced by cracked gear tooth and pass effect of the planet gears

Fault Signal Simulation and Service Condition Monitoring of Cracked Gear System

Establishment of the dynamic BTAP model and load-sharing analysis of herringbone gear planetary system with cracks

Mesh stiffness modelling and dynamic simulation of helical gears with tooth crack propagation

Sideband analysis of cracked planetary gear train considering output shaft radial assembly error

Dynamic modeling and analysis of planetary gear system for tooth fault diagnosis