Abstract:Seismic risk assessment of nuclear power plants (NPPs) based on seismic hazard and fragility analyses of structures/components has become important since Japanese NPPs have experienced several large earthquakes beyond the design basis ground motion. In addition, cracks resulting from the long-term operation of NPPs have been detected in piping system of NPPs. For example, in the pressurized water reactor environment, crack initiation and propagation due to primary water stress corrosion cracking (PWSCC) have been observed in dissimilar metal welds made of nickel-based alloy. Therefore, fragility analyses related to seismic probabilistic risk assessment considering such PWSCC and seismic loading are important for more realistic seismic risk assessment. In our previous study, a fragility analysis method for cracked pipes that is applicable for the carbon and stainless steel pipes has been developed. The developed method consists of two functions for evaluating the crack growth due to seismic loading as well as the age-related degradation. Since the crack growth evaluation method is available for only carbon steel and stainless steel pipes, it is important to enhance the applicability of the method to dissimilar metal welds of pipes where the cracks due to PWSCC were observed. In this study, an extensive study for crack growth evaluation method is performed for the dissimilar metal welds. Here, applicability of the previously developed method to a nickel-based alloy weld is investigated. We performed crack growth tests using the center cracked plate specimens and welded pipe specimens with circumferential through-wall crack machined from dissimilar metal weld joint of pipes. It is found that the amount of crack growth predicted by our crack growth evaluation method are in good agreement with the experimental results. Therefore, we conclude that the previously developed method can be widely used for evaluating the crack growth behavior under seismic loading conditions in the nuclear piping including dissimilar metal welds of pipes.

OS1427 Evaluation Method of Crack Growth in Reactor Piping Subjected to Seismic Loading Beyond Small Scale Yielding Condition

Crack Growth Evaluation for Cracked Carbon and Stainless Steel Pipes under Large Seismic Cyclic Loading

OS0503 Effect of Excessive Compressive Loading on the Crack Growth Behavior

OS0807 Evaluation of Crack Growth under Seismic Loading in Nickel Based Alloy Weld

Crack Growth Prediction for Cracked Dissimilar Metal Weld Joint in Pipe under Large Seismic Cyclic Loading

Experimental and Numerical Investigation on the Seismic Behavior of above Ground High Density Polyethylene Pipe in Nuclear Power Plant

Experimental and Analytical Studies on the Effect of Excessive Loading on Fatigue Crack Propagation in Piping Materials

Failure Behavior Analyses of Piping System under Dynamic Seismic Loading

Improvement of Probabilistic Fracture Mechanics Analysis Code for Reactor Piping Considering Large Earthquakes

Development of J-Integral Solutions for Semi-Elliptical Circumferential Cracked Pipes Subjected to Internal Pressure and Bending Moment

Investigation on Evaluation Method Based on J Integral for Retardation of Crack Growth Due to Excessive Loading Beyond Small Scale Yielding Condition

INVESTIGATION ON DAMAGE EVALUATION INDEX WITH DUCTILITY FACTOR BASED ON SIMULATION ANALYSIS FOR LOADING TEST OF PIPING SUPPORT STRUCTURE

Evaluation Of Excessive Loading Effect On Fatigue Crack Growth Behavior Based On Crack Blunting And Stress Distribution In Front Of The Crack Tip

Experimental Investigation of Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Experimental Study on Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Multi-Axial Loads

Development of Seismic Response Analysis Method of Piping System: Proposal of the Nonlinear Spring Model for Piping Support Structures

1003 Experimental Study on Limit Load Criterion for Pipe with Crack Modelled in Its Shape

Experimental Investigation on the Failure Estimation Method of Cracked Cylinders Subjected to Multi-Axial Loads

Failure Probability Analysis of Aged Piping Using Probabilistic Fracture Mechanics Methodology Considering Seismic Loads

HYBRID DYNAMIC RESPONSE TEST FOCUSING ON THE SUPPORT STRUCTURE OF PIPING SYSTEMS

Prediction of Collapse Stress for Pipes with Arbitrary Multiple Circumferential Surface Flaws