Abstract:Seismic risk assessment of nuclear power plants (NPPs) based on seismic hazard and fragility analyses of structures/components has become important since Japanese NPPs have experienced several large earthquakes beyond the design basis ground motion. In addition, cracks resulting from the long-term operation of NPPs have been detected in piping system of NPPs. For example, in the pressurized water reactor environment, crack initiation and propagation due to primary water stress corrosion cracking (PWSCC) have been observed in dissimilar metal welds made of nickel-based alloy. Therefore, fragility analyses related to seismic probabilistic risk assessment considering such PWSCC and seismic loading are important for more realistic seismic risk assessment. In our previous study, a fragility analysis method for cracked pipes that is applicable for the carbon and stainless steel pipes has been developed. The developed method consists of two functions for evaluating the crack growth due to seismic loading as well as the age-related degradation. Since the crack growth evaluation method is available for only carbon steel and stainless steel pipes, it is important to enhance the applicability of the method to dissimilar metal welds of pipes where the cracks due to PWSCC were observed. In this study, an extensive study for crack growth evaluation method is performed for the dissimilar metal welds. Here, applicability of the previously developed method to a nickel-based alloy weld is investigated. We performed crack growth tests using the center cracked plate specimens and welded pipe specimens with circumferential through-wall crack machined from dissimilar metal weld joint of pipes. It is found that the amount of crack growth predicted by our crack growth evaluation method are in good agreement with the experimental results. Therefore, we conclude that the previously developed method can be widely used for evaluating the crack growth behavior under seismic loading conditions in the nuclear piping including dissimilar metal welds of pipes.

OS0503 Effect of Excessive Compressive Loading on the Crack Growth Behavior

Evaluation Of Excessive Loading Effect On Fatigue Crack Growth Behavior Based On Crack Blunting And Stress Distribution In Front Of The Crack Tip

OS0807 Evaluation of Crack Growth under Seismic Loading in Nickel Based Alloy Weld

Experimental and Analytical Studies on the Effect of Excessive Loading on Fatigue Crack Propagation in Piping Materials

Crack Growth Evaluation for Cracked Carbon and Stainless Steel Pipes under Large Seismic Cyclic Loading

OS1427 Evaluation Method of Crack Growth in Reactor Piping Subjected to Seismic Loading Beyond Small Scale Yielding Condition

Investigation on Evaluation Method Based on J Integral for Retardation of Crack Growth Due to Excessive Loading Beyond Small Scale Yielding Condition

Crack Growth Prediction for Cracked Dissimilar Metal Weld Joint in Pipe under Large Seismic Cyclic Loading

Failure Behavior Analyses of Piping System under Dynamic Seismic Loading

CREEP DEFORMATION ANALYSIS OF A PIPE SPECIMEN BASED ON CREEP DAMAGE EVALUATION METHOD

Experimental Investigation on the Failure Estimation Method of Cracked Cylinders Subjected to Multi-Axial Loads

ICONE19-43356 NET-SECTION-COLLAPSE OF CIRCUMFERENTIALLY CRACKED CYLINDERS SUBJECTED TO TORSIONAL MOMENT

Effect of Cyclic Loading on the Relaxation of Residual Stress in the Butt-Weld Joints of Nuclear Reactor Piping

Nonlinear Time History Analysis of a Pre-Stressed Concrete Containment Vessel Model under Japan's March 11 Earthquake

Experimental Study on Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Multi-Axial Loads

Failure Probability Of Degraded Pipes Based On Probabilistic Fracture Mechanics For Seismic Safety Margin Assessment On Npp

Experimental Investigation of Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Effect of Torsion Moment on Failure Bending Moment for Circumferentially Cracked Pipe

INVESTIGATION ON DAMAGE EVALUATION INDEX WITH DUCTILITY FACTOR BASED ON SIMULATION ANALYSIS FOR LOADING TEST OF PIPING SUPPORT STRUCTURE

Development of J-Integral Solutions for Semi-Elliptical Circumferential Cracked Pipes Subjected to Internal Pressure and Bending Moment

ICONE19-43138 Prediction of Failure Bending Moment for a Pipe Containing Multiple Circumferential Cracks with Complex Shapes