Abstract:The Ni‐PTFE mold is a nanocomposite mold fabricated by one‐pot electroforming using anodic aluminum oxide (AAO) foil as a template. It has low surface energy and low surface wettability, enabling precise, defect‐free nanopatterns down to 100 nm over 20 cycles of thermal nanoimprinting (T‐NIL). UV‐NIL also succeeded, with the nanocomposite mold exhibiting superior demolding compared to a silane‐coated Ni mold. Nanoimprinting large‐area structures, especially high‐density features like meta lenses, poses challenges in achieving defect‐free nanopatterns. Conventional high‐resolution molds for nanoimprinting are often expensive, typically constructed from inorganic materials such as silicon, nickel (Ni), or quartz. Unfortunately, replicated nanostructures frequently suffer from breakage or a lack of definition during demolding due to the high adhesion and friction at the polymer‐mold interface. Moreover, mold degradation after a limited number of imprinting cycles, attributed to contamination and damaged features, is a common issue. In this study, a disruptive approach is presented to address these challenges by successfully developing an anti‐sticking nanocomposite mold. This nanocomposite mold is created through the co‐deposition of nickel atoms and low surface tension polytetrafluoroethylene (PTFE) nanoparticles via electroforming. The incorporation of PTFE enhances the ease of polymer release from the mold. The resulting Ni‐PTFE nanocomposite mold exhibits exceptional lubrication properties and a significantly reduced surface energy. This robust nanocomposite mold proves effective in imprinting fine, densely packed nanostructures down to 100 nm using thermal nanoimprinting for at least 20 cycles. Additionally, UV nanoimprint lithography (UV‐NIL) is successfully performed with this nanocomposite mold. This work introduces a novel and cost‐effective approach to reusable high‐resolution molds, ensuring defect‐reduction production in nanoimprinting.

J212024 Impact of Wetting Behavior on Nanoimprint of Metallic Glass in Sub-10-nm Scale

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Nanoimprinting of magnetic FeCo-based metallic glass thin films

Large-area and Uniform Amorphous Metallic Nanowire Arrays Prepared by Die Nanoimprinting

Glass nanoimprint using amorphous Ni–P mold etched by focused-ion beam

Theoretical and experimental study of metallic glass die-imprinting for manufacturing large-size micro/nano structures

Atomic step patterning in nanoimprint lithography: Molecular dynamics study

Sustainable Fabrication of Glass Nanostructures Using Infrared Transparent Mold Assisted by CO2 Laser Scanning Irradiation

Atomic-Scale Imprinting by Sputter Deposition of Amorphous Metallic Films

Silver high-aspect-ratio micro- and nanoimprinting for optical applications

Fabrication of Cross-Sinusoidal Anti-Reflection Nanostructure on a Glass Substrate Using Imperfect Glass Imprinting with a Nano-Pin Array Vitreous Carbon Stamp

System of Thermal Micro/Nano Printing and Its Application in Metallic Glass

Toward 1Tdot∕in.2 nanoimprint lithography for magnetic bit-patterned media: Opportunities and challenges

Study of Moiré Grating Fabrication on Metal Samples Using Nanoimprint Lithography

Nondestructive Metrology for Nanoimprint Processes

Micro-print and nano-imprint methods combining laser-drilled screen printing and ultraviolet nanoimprint lithography: a review

Nanoscale Printing of Indium-Tin-Oxide by Femtosecond Laser Pulses

Toward Defect‐Free Nanoimprinting

Study on nano-graphitic carbon coating on Si mold insert for precision glass molding

Picosecond Laser Interference Patterning of Periodical Micro-Architectures on Metallic Molds for Hot Embossing