Abstract:Spatially patterned dielectric materials are ubiquitous in electronic, photonic, and optoelectronic devices. These patterns are typically made by subtractive or additive approaches utilizing vapor-phase reagents. On the other hand, recent advances in solution-phase synthesis of oxide nanomaterials have unlocked a materials library with greater compositional, microstructural, and interfacial tunability. However, methods to pattern and integrate these nanomaterials in real-world devices are less established. In this work, we directly optically pattern oxide nanoparticles (NPs) by mixing them with photosensitive diazo-2-naphthol-4-sulfonic acid and irradiating with widely available 405 nm light. We demonstrate the direct optical lithography of ZrO2, TiO2, HfO2, and ITO NPs and investigate the chemical and physical changes responsible for this photoinduced decrease in solubility. Micron-thick layers of amorphous ZrO2 NPs were patterned with micron resolution and shown to allow 2 pi phase control of visible light. We also show multilayer patterning and use it to fabricate features with different thicknesses and distinct structural colors. Upon annealing at 400 degrees C, the deposited ZrO2 structures have excellent optical transparency across a wide wavelength range (0.3-10 mu m), a high refractive index (n = 1.84 at 633 nm), and are optically smooth. We then fabricate diffractive optical elements, such as binary phase diffraction gratings, that show efficient diffractive behavior and good thermal stability. Different oxide NPs can also be mixed prior to patterning, providing a high level of material tunability. This work demonstrates a general patterning approach that harnesses the processability and diversity of colloidal oxide nanomaterials for use in photonic applications.

Nanoscale Printing of Indium-Tin-Oxide by Femtosecond Laser Pulses

Single-color Peripheral Photoinhibition Lithography of Nanophotonic Structures

Advancing Integrated Photonics and Microreactor Technologies with Ultrafast Laser Processing

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Periodic Transparent Nanowires in ITO Film Fabricated Via Femtosecond Laser Direct Writing

Optical and Electrical Properties of Ink-Jet Printed Indium – Tin-Oxide Nanoparticle Fi Lms

Tunable Surface Plasmon Resonance Frequencies of Monodisperse Indium Tin Oxide Nanoparticles by Controlling Composition, Size, and Morphology

High-Performance Birefringence of Periodic Nanostructures in FTO Thin Film Fabricated by IR-UV Femtosecond Laser

Extremely High-Quality Periodic Structures on ITO Film Efficiently Fabricated by Femtosecond Pulse Train Output from a Frequency-Doubled Fabry–Perot Cavity

Direct Imprint Patterning of 2-D and 3-D Nanoparticle/polymer Hybrid and Crystalline Metal Oxide Structures for Printed Optical, Electronic, and Energy Devices

3D Laser Nanoprinting of Optically Functionalized Structures with Effective-Refractive-Index Tailorable TiO2 Nanoparticle-Doped Photoresin

Part2: Ultra-short pulse laser patterning of very thin indium tin oxide on glass substrates

Laser Nanofabrication: Applications in Micro-Optics, Micro-Electronics, Micromachines, and Microfluidics

Fully Printed High-Performance n-Type Metal Oxide Thin-Film Transistors Utilizing Coffee-Ring Effect

Direct Writing of 150 Nm Gratings and Squares on ZnO Crystal in Water by Using 800 Nm Femtosecond Laser

Nanometre-thin Indium Tin Oxide for Advanced High-Performance Electronics

Direct Optical Lithography of Colloidal Metal Oxide Nanomaterials for Diffractive Optical Elements with 2 Phase Control

Laser nano-fabrication inside silicon with spatial beam modulation and non-local seeding

Fabrication of Infrared Micro-Optical Components Using Femtosecond Laser

Nanometer Sized Direct Laser‐Induced Gold Printing for Precise 2D‐Electronic Device Fabrication

Surface Nano-fabrication by Laser Precision Engineering