Abstract:Structural integrity assessment of reactor pressure vessels (RPVs) is essential for the safe operation of nuclear power plants. For RPVs in pressurized water reactors (PWRs), the assessment should be performed by considering neutron irradiation embrittlement and pressurized thermal shock (PTS) events. To assess the structural integrity of an RPV, a traditional method is usually employed by comparing fracture toughness of the RPV material with the stress intensity factor (KI) of a crack postulated near the RPV inner surface. When an underclad crack (i.e., a crack beneath the cladding of an RPV) is postulated, KI of this crack can be increased owing to the plasticity effect of cladding. This is because the yield stress of cladding is lower than that of base metal and the cladding may yield earlier than base metal. In this paper, detailed three-dimensional (3D) finite element analyses (FEAs) were performed in consideration of the plasticity effect of cladding for underclad cracks postulated in Japanese RPVs. Based on the 3D FEA results, a plasticity correction method was proposed on KI calculations of underclad cracks. In addition, the effects of RPV geometries and loading conditions were investigated using the proposed plasticity correction method. Moreover, the applicability of the proposed method to the case which considers the hardening effect of materials after neutron irradiation was also investigated. All of these results indicate that the proposed plasticity correction method can be used for KI calculations of underclad cracks and is applicable to structural integrity assessment of Japanese RPVs containing underclad cracks.

Investigation on the Plasticity Correction of Stress Intensity Factor Calculations for Underclad Cracks in Reactor Vessels

Plasticity Correction on Stress Intensity Factor Evaluation for Underclad Cracks in Reactor Pressure Vessels

Effects of Plasticity on the Stress Intensity Factor Evaluation for Underclad Crack under Pressurized Thermal Shock Events

Embedded Crack Treatments and Fracture Toughness Evaluation Methods in Probabilistic Fracture Mechanics Analysis Code for the PTS Analysis of RPV

Importance of fracture criterion and crack tip material characterization in probabilistic fracture mechanics analysis of an RPV under a pressurized thermal shock

Integrity Assessment Considering Unified Constraint for Reactor Pressure Vessel under Pressurized Thermal Shock

Re-Evaluation of the Structural Integrity of the Chinese Qinshan 300-MWe Reactor Pressure Vessel Under Pressurized Thermal Shock Using the Master Curve Method

Application of Flaw Updating Process on Probabilistic Integrity Analysis for a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Improvements to a probabilistic fracture mechanics code for evaluating the integrity of a RPV under transient loading

Constraint characterization and fracture initiation analysis for semi-elliptical surface cracks in reactor pressure vessel

Development of Stress Intensity Factor Solution for Surface Crack at Nozzle Corner in Reactor Pressure Vessel

Fracture Studies on Cruciform Bend Specimens of Pressure Vessel Steel subjected to Thermo-mechanical Loading

Stress Intensity Factor Solutions for Surface Cracks with Large Aspect Ratios in Cylinders and Plates

Extension of Pascal4 Code for Probabilistic Fracture Mechanics Analysis of Reactor Pressure Vessel in Boiling Water Reactor

Development of Stress Intensity Factors for Subsurface Flaws in Plates Subjected to Polynomial Stress Distributions

Experimental study on fatigue crack growth behavior and fracture toughness of SA508-III steel for nuclear reactor pressure vessel

Guideline on Probabilistic Fracture Mechanics Analysis for Japanese Reactor Pressure Vessels

Study on Stress Intensity Factor of Girth Weld with Crack Defects

Loading Condition Evaluation for Structural Integrity Assessment of RPV Due to PTS Event Based on Three-Dimensional Thermal-Hydraulics and Structural Analyses

Improvement of Probabilistic Fracture Mechanics Analysis Code PASCAL-SP Regarding Stress Corrosion Cracking in Nickel Based Alloy Weld Joint of Piping System in Boiling Water Reactor

Probabilistic Fracture Mechanics Analyses of Reactor Pressure Vessel under PTS Transients