Abstract:Structural integrity assessment of reactor pressure vessels (RPVs) is essential for the safe operation of nuclear power plants. For RPVs in pressurized water reactors (PWRs), the assessment should be performed by considering neutron irradiation embrittlement and pressurized thermal shock (PTS) events. To assess the structural integrity of an RPV, a traditional method is usually employed by comparing fracture toughness of the RPV material with the stress intensity factor (KI) of a crack postulated near the RPV inner surface. When an underclad crack (i.e., a crack beneath the cladding of an RPV) is postulated, KI of this crack can be increased owing to the plasticity effect of cladding. This is because the yield stress of cladding is lower than that of base metal and the cladding may yield earlier than base metal. In this paper, detailed three-dimensional (3D) finite element analyses (FEAs) were performed in consideration of the plasticity effect of cladding for underclad cracks postulated in Japanese RPVs. Based on the 3D FEA results, a plasticity correction method was proposed on KI calculations of underclad cracks. In addition, the effects of RPV geometries and loading conditions were investigated using the proposed plasticity correction method. Moreover, the applicability of the proposed method to the case which considers the hardening effect of materials after neutron irradiation was also investigated. All of these results indicate that the proposed plasticity correction method can be used for KI calculations of underclad cracks and is applicable to structural integrity assessment of Japanese RPVs containing underclad cracks.

Embedded Crack Treatments and Fracture Toughness Evaluation Methods in Probabilistic Fracture Mechanics Analysis Code for the PTS Analysis of RPV

Probabilistic Fracture Mechanics Analyses of Reactor Pressure Vessel under PTS Transients

Development of Rpv Reliability Analysis Code Based on Probabilistic Fracture Mechanics Methodology

Guideline on Probabilistic Fracture Mechanics Analysis for Japanese Reactor Pressure Vessels

Importance of fracture criterion and crack tip material characterization in probabilistic fracture mechanics analysis of an RPV under a pressurized thermal shock

Application of Probabilistic Fracture Mechanics to Reactor Pressure Vessel Using PASCAL4 Code

Extension of Pascal4 Code for Probabilistic Fracture Mechanics Analysis of Reactor Pressure Vessel in Boiling Water Reactor

Verification of Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessel

Development of a PFM code for evaluating reliability of pressure components subject to transient loading

Improvements to a probabilistic fracture mechanics code for evaluating the integrity of a RPV under transient loading

Application Of Probabilistic Fracture Mechanics Methodology For Japanese Reactor Pressure Vessels Using Pascal4

Verification of Probabilistic Fracture Mechanics Analysis Code PASCAL for Reactor Pressure Vessel

Verification of Probabilistic Fracture Mechanics Analysis Code Through Benchmark Analyses

K-0805 Development of PFM Code with a Function of Ductile Crack Extension Analysis : Part1: Introduction of Ductile Crack Extension Analysis Function Based on R6 Method

Effects of Plasticity on the Stress Intensity Factor Evaluation for Underclad Crack under Pressurized Thermal Shock Events

Verification Methodology and Results of Probabilistic Fracture Mechanics Code PASCAL

Benchmarking Study on Probabilistic Fracture Mechanics Analysis Codes Xlpr and PASCAL-SP Considering Primary Water Stress Corrosion Cracking

Improvement of Probabilistic Fracture Mechanics Analysis Code PASCAL-SP with Regard to PWSCC

Investigation on the Plasticity Correction of Stress Intensity Factor Calculations for Underclad Cracks in Reactor Vessels

Probabilistic Fracture Mechanics Benchmarking Study Involving the Xlpr and Pascal-Sp Codes -Analysis by Pascal-Sp-

Plasticity Correction on Stress Intensity Factor Evaluation for Underclad Cracks in Reactor Pressure Vessels