Abstract:Fretting fatigue pertains to the behavior of engineering components subjected to cyclic loading while in contact with each other. This challenging contact-related phenomenon often leads to premature failure compared to typical fatigue issues. To extend the lifespan of components experiencing fretting fatigue, surface strengthening is crucial. One well-established method for enhancing the durability of these components is the application of compressive residual stress to the material's surface, achieved through a process called Shot Peening (SP). Numerous parameters in SP, such as shot speed, ball material, ball diameter, and coverage, must be carefully controlled to make beneficial compressive residual stress. These parameters significantly affect the residual stress distribution, containing the maximum residual stress, the depth of the residual stress area, and the depth of the maximum residual stress. The Critical Plane (CP) approach is used to calculate the damage parameter, and the Theory of Critical Distance (TCD) method is utilized to average the damage parameter due to the stress concentration resulting from the contact problem to investigate the impact of residual stress distribution on crack initiation behavior. Additionally, Linear Elastic Fracture Mechanics (LEFM) criteria, specifically the Extended Maximum Tangential Stress (E-MTS) criterion, are used to study how the residual stress affects crack propagation lifetime under fretting conditions. It is found that the maximum residual stress plays the most important role in improving crack initiation and propagation lifetimes, as well as the depth of the residual stress region. However, an increase in the depth of the maximum residual stress has a negative impact on crack initiation lifetime, and it has little effect on crack propagation lifetime. Furthermore, the enhanced lifetime diminishes as the applied loads increase.

K-1002 Effect of Relative Slip on Fretting Fatigue Behavior

Initiation and Propagation of Fretting Fatigue Crack in the Very Long Fatigue Life.

130 Effect of Residual Stress on Fretting Fatigue Crack Propagation and Fatigue Strength

Effect of Stress Ratio on Crack Initiation Point in Fretting Fatigue

OS11W0243 Evaluation of Crack Initiation Limit in Fretting Fatigue Based on the Singular Stress Field Near the Contact Edge

Influence of relative slip on fretting fatigue behaviour of 2014 aluminium alloy with the age-hardened conditions T4 and T6

Effect of Residual Stress Induced by Surface Treatment on Fretting Fatigue.

Fracture Mechanics Assessment of Stress Concentrations in Incomplete Fretting Contacts

In-situ Observation and Finite Element Analysis of Fretting Fatigue Crack Propagation Behavior in 1045 Steel

Stress Field near the Contact Edge in Fretting Fatigue Tests.

Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy

A comparative study of several life prediction models based on the critical plane approach for fretting fatigue crack initiation

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

Estimation Method of Relative Slip in Fretting Fatigue Contact by Digital Image Correlation

Prediction of Location of Fretting Fatigue Crack Initiation Subject to High Stress Ratio Cyclic Load

Effects of Stick-Slip on Stress Intensity Factors for Subsurface Short Cracks in Rolling Contact

A Study on the Relation Between Threshold Effective Stress Intensity Factor Range and Load Ratio

Effect of shot peening parameters on fretting fatigue lifetime

Comparison of the continuum damage and fracture mechanics in fatigue assessment of components containing residual stresses

Effect of maximum applied cyclic stress on fretting fatigue stress distribution of flat-on-flat modified 9Cr-1Mo steel contact: Finite element analysis

Evaluation Method of Fatigue Crack Growth Rates at Various Stress Rations. Investigation Based on Small Crack Growth Law.