Abstract:Synchrotron X-ray diffraction (SXRD) strain analysis is well established for high crystalline materials such as metals and ceramics, however, previously it has not been used in Carbon Fibre Reinforced Polymer (CFRP) composites due to their complex turbostratic atomic structure. This paper will present the feasibility of using SXRD for fibre orientation and lattice strain mapping inside CFRPs. In particular, it is the first time that the radial {002} and axial {100} strains of carbon fibre crystal planes have been analysed and cross-validated via numerical multi-scale simulation in a two-scale manner. In order to simplify the analysis and provide comparable estimates, an UniDirectional (UD) CFRP formed into a well-established humpback bridge shape was used. The lattice strain estimates obtained from SXRD showed localised stress concentrations and effectively matched the numerical results obtained by modelling. The mean absolute percentage differences between the two were 25.8% and 28.5% in the radial and axial directions, respectively. Differences between the two measurements are believed to originate from the non-uniform thermal history, forming geometry and tool-part interaction which leads to localised residual strains in the laminate which are unable to be fully captured by the numerical simulation performed. The carbon fibre microstructures of the inner plies adjacent to the tool were found to be significantly influenced by these factors and therefore the largest errors were observed at these locations. The approach presented has significant promise and implications for research into the micromechanics of composite materials and areas for future improvement have been outlined.

Synchrotron Radiation Diffraction Enhanced Imaging of Carbon Fiber Composites

Multi-contrast Diffraction Enhanced Computed Laminography at Beijing Synchrotron Radiation Facility.

Synchrotron Radiation Tomography for Reconstruction of Layer Structures and Internal Defects of Composite Materials

Ultrasonic Testing of Carbon Fiber-Reinforced Polymer Composites

Diffraction Enhanced Imaging Computer Tomography

In situ observations of fractures in short carbon fiber/epoxy composites

Defect imaging in carbon fiber composites by acoustic shearography

A New Diffraction-Enhanced Imaging Set-Up for Large Sample Using Synchrotron Radiation X-ray

Non-contact Defect Imaging of Carbon Fiber Composites Using Laser Excited Acoustic Shearography

Application of X-ray Real-time Imaging Technology on Detection of Carbon Fiber Preform and Its Composites

Progress of diffraction enhanced imaging at the Beijing Synchrotron Radiation Facility

Strain Induced Crack Initiation and the Subsequent Crack Propagation of Fiber-Reinforced Resin Composites

Diffraction Enhanced Imaging of Breast Tissue

Damage Evolution of 3D Woven Carbon/epoxy Composites under Tension-Tension Fatigue Loading Based on Synchrotron Radiation Computed Tomography (SRCT)

Internal Three-Dimensional Strain Evolution of the Failure Process for Short Carbon Fiber Composite Through in Situ Synchrotron Radiation X-ray Computed Tomography

Diffraction Enhanced Imaging and Imaging Application Experiment

Synchrotron CT Imaging of Lattice Structures with Engineered Defects

Computerized tomography based on DEI refraction information.

Visualization of defects in CFRP-reinforced steel structures using improved eddy current pulsed thermography

Carbon fibre lattice strain mapping via microfocus synchrotron X-ray diffraction of a reinforced composite

Contrast-Enhanced Imaging of Carbon Fiber Composites using Hafnium Oxide Nanocrystals