Abstract:This paper is the first to predict and then validate the overall stress-strain curve and the damage sequence comprising matrix cracking, interface debonding and fibre fracture against X-ray Computed Tomography (CT) observations for a multidirectional laminate. Until recently, numerical modelling of multi-directional multi-ply composites required idealised continuum mechanics models or idealised unit cell approaches (or homogenisation method) that cannot reliably capture property variations and the complex sequence of damage events that occur upon tensile loading. Here a multiscale 3D image-based model is used to simulate stochastic crack growth in a double-notch (-45 degrees/90 degrees/+45 degrees/0 degrees/-45 degrees/90 degrees/+45 degrees/0 degrees)s carbon fibre reinforced polymer (CFRP) composite specimen subjected to tensile loading monitored by time-lapse X-ray CT. The data integration approach involves: (1) parallel simulations of meso-scale elements (MeEs) for each ply for which the orientation of the individual fibres has been extracted from an X-ray CT image, (2) local hierarchical coupling of the MeEs into a macro-scale mechanical model of the test piece, and (3) the use of a random variation in material properties where micro structural details are not revealed by the X-ray CT characterisation method. Cohesive interface elements (CIEs) are used at both scales to predict the accumulation of interface damage and crack growth. The fibre-level modelling captures the detailed damage sequence and crack morphology including fibre/matrix debonding, sliding, matrix cracking and fibre fracture events. The multiscale model is validated by comparison with the measured tensile loading curve and the damage evolution recorded by the X-ray CT. This approach can reduce the reliance of certification on extensive heirarchical structural testing schemes from test piece to full-scale component.

Carbon fibre lattice strain mapping via microfocus synchrotron X-ray diffraction of a reinforced composite

Field Strain Measurement on the Fiber-Epoxy Scale in CFRPs

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites

Morphology characterization and in-situ three-dimensional strain field monitor of short carbon fiber-reinforced polymer composites under tension

Fibre orientation distribution function mapping for short fibre polymer composite components from low resolution/large volume X-ray computed tomography

Multi-Directional Strain Measurement in Fiber-Reinforced Plastic Based on Birefringence of Embedded Fiber Bragg Grating

Dynamic Enhancement Induced by Interface for Additively Manufactured Continuous Carbon Fiber Reinforced Composites

Microscale Strain Distribution Measurement Before and after Crack and Delamination Occurrence in CFRP Laminates by Multiplication Sampling Moiré Method

Strain Induced Crack Initiation and the Subsequent Crack Propagation of Fiber-Reinforced Resin Composites

Internal Three-Dimensional Strain Evolution of the Failure Process for Short Carbon Fiber Composite Through in Situ Synchrotron Radiation X-ray Computed Tomography

Textile-based strain sensors for fiber-reinforced composites under tension, compression and bending

In-situ Micro-Ct Damage Analysis of Carbon and Carbon/glass Hybrid Laminates under Tensile Loading by Image Reconstruction and DVC Technology

Strain measurement of CFRP-Steel bonded joints using distributed optical fibre sensors

In situ observations of fractures in short carbon fiber/epoxy composites

Synchrotron CT Imaging of Lattice Structures with Engineered Defects

Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites

Multi-scale correlation of impact-induced defects in carbon fiber composites using X-ray scattering and machine learning

Damage Evolution of 3D Woven Carbon/epoxy Composites under Tension-Tension Fatigue Loading Based on Synchrotron Radiation Computed Tomography (SRCT)

Computational modelling of the crushing of carbon fibre-reinforced polymer composites

In Situ X-Ray Tomography Characterisation Of 3d Deformation Of C/C-Sic Composites Loaded Under Tension

In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites