In4SnS8ultrathin nanosheets: a ternary sulfide with fast adsorption–visible-light photocatalysis dual function

Shuling Shen,Long Li,Zhujun Wu,Minquan Sun,Zhihong Tang,Junhe Yang

DOI: https://doi.org/10.1039/c6ra27262b

IF: 4.036

2017-01-01

RSC Advances

Abstract:Ultrathin In4SnS8nanosheets with a thickness of only 3.8 nm exhibited fast adsorption–visible-light photocatalysis dual function for various organic dyes.

What problem does this paper attempt to address?

In4SnS8 ultrathin nanosheets: a ternary sulfide with fast adsorption–visible-light photocatalysis dual function

Shuling Shen,Long Li,Zhujun Wu,Minquan Sun,Zhihong Tang,Junhe Yang

DOI: https://doi.org/10.1039/c6ra27262b

IF: 4.036

2017-01-01

RSC Advances

Abstract:Ultrathin In4SnS8 nanosheets have been successfully synthesized via a facile thermal decomposition method. The average thickness of these In4SnS8 nanosheets is only 3.8 nm, comprising about five atomically thick layers. To our knowledge, this is the thinnest In4SnS8 nanosheet synthesized using a solution-phase chemical method. The resulting ultrathin In4SnS8 nanosheets exhibit fast adsorption-visible-light photocatalysis dual function for various organic dyes, suggesting their potential application in environmental remediation, solar energy conversion, and advanced optical/electric nanodevices.
In Situ Synthesis of Metal Sulfide Nanoparticles Based on 2D Metal-Organic Framework Nanosheets.

Qipeng Lu,Meiting Zhao,Junze Chen,Bo Chen,Chaoliang Tan,Xiao Zhang,Ying Huang,Jian Yang,Feifei Cao,Yifu Yu,Jianfeng Ping,Zhicheng Zhang,Xue-Jun Wu,Hua Zhang

DOI: https://doi.org/10.1002/smll.201600976

IF: 13.3

2016-01-01

Small

Abstract:A facile in situ synthetic method is developed to synthesize metal sulfide nanoparticles based on 2D M-TCPP (M = Cu, Cd, or Co, TCPP = tetrakis(4-carboxyphenyl)porphyrin)) metal-organic framework nanosheets. The obtained CuS/Cu-TCPP composite nanosheet is used as the active material in photoelectrochemical cells, showing notably increased photocurrent due to the improved exciton separation and charge carrier transport.
Insights into the Enhanced Adsorption/photocatalysis Mechanism of a Bi4O5Br2/g-C3N4 Nanosheet

Futao Yi,Jianqing Ma,Chuanwei Lin,Liyan Wang,Huining Zhang,Yongxing Qian,Kefeng Zhang

DOI: https://doi.org/10.1016/j.jallcom.2019.153557

IF: 6.2

2020-01-01

Journal of Alloys and Compounds

Abstract:The composite Bi4O5Br2/g-C3N4 nanosheet was fabricated by facile precipitation method for the first time. The results of XRD, XPS and FT-IR confirmed the successful construction of heterojunctions. Bi4O5Br2/g-C3N4 displayed better adsorptive and photocatalytic activity for removal of rhodamine B (RhB) and tetracycline hydrochloride (TC) with good stability. Zeta potential and BET analysis suggested that the enhancement of Lewis base sites and large surface area were the reason for the improvement of adsorptive mechanism. On the side of photocatalysis, the better charge separation and visible light utilization in Bi4O5Br2/g-C3N4 were confirmed by transient photocurrent response, PL spectrum and UV–vis DRS. Moreover, active species trapping experiments and ESR tests indicated that h+ and ·O2− were the main radicals in the photocatalytic system. As the formation of type II heterojunction, band structures were optimized by valence band (VB) and conduct band (CB) offset, which was depth calculated. Due to this optimization and more activity sites generated in the photocatalyst surface, a slight improvement of the ·O2− generation was displayed by quantification test. This work might provide some guidance for synergy of adsorption and the photocatalytic degradation mechanism, and rational construction of type II heterojunctions to solve ever-increasing environmental problems.
Facile Synthesis of Tin Monosulfide Nanosheets Via Physical Vapour Deposition and Their Near-Infrared Photoresponse

Shuo Yuan,Gangzha Liu,He Tian,Chao Fan,Mengjun Wang,Erping Li

DOI: https://doi.org/10.1063/1.5119310

IF: 1.697

2019-01-01

AIP Advances

Abstract:Two-dimensional layered materials (TDLMs), such as tin sulfide (SnS2), have attracted significant attention due to their vast potential applications in the fields of electronics, optoelectronics, energy conversion, and storage. Tin monosulfide (SnS) is an intrinsic p-type semiconductor in the family of TDLMs. Further explorations of SnS requires the development of efficient synthesis techniques. Here, we report SnS nanosheets grown via a physical vapour deposition (PVD) approach. The morphology was characterized using Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM). These SnS nanosheets exhibit a square shape with a smooth surface having an average lateral size of 7 μm and a thickness of 12 nm. No impurities were observed in the SnS nanosheets. Furthermore, photodetectors based on such SnS nanosheets were fabricated. The results show that the as-grown SnS has an excellent photo-response performance for an 850-nm laser with a high responsivity of 1604 AW-1, an external quantum efficiency of 2.34 × 105% and a detectivity of 3.42 × 1011 jones, which are larger than those values reported for previous SnS-based photodetectors. Moreover, the rise and fall times are 7.6 and 29.9 ms, respectively. Our work provides a strategy to obtain high-purity and ultrathin SnS while indicating that SnS has a great potential in applications for near-infrared photodetectors.
Distortion of the Coordination Structure and High Symmetry of the Crystal Structure in In 4 SnS 8 Microflowers for Enhancing Visible-Light Photocatalytic CO 2 Reduction

Yao Chai,Yanmei Chen,Jinni Shen,Mengmeng Ni,Bing Wang,Dongmiao Li,Zizhong Zhang,Xuxu Wang

DOI: https://doi.org/10.1021/acscatal.1c02937

IF: 12.9

2021-08-20

ACS Catalysis

Abstract:Modulating the crystal structure of the semiconductor photocatalyst is important to separate and migrate the photogenerated electrons and holes for good photocatalytic performance. Here, we show that Sn replaces part of In atoms in In2S3 nanosheets to form bimetallic sulfide In4SnS8, which induces the distortion of the [InS6] octahedron and improves the crystal symmetry of the spatial arrangement of [SnS6] and [InS6] octahedrons. The twisted [InS6] octahedron can promote the separation of photogenerated carriers. The improved symmetry of the crystal structure promotes the migration of separated electrons through reducing the lattice scattering effect of the crystal structure, which is favorable to the rapid transfer of electrons from the bulk to the surface. Both endow In4SnS8 with generation rates of CH4 and CO about 20 and 12 times higher than those of In2S3 and SnS2 for the catalytic CO2 photoreduction reaction, respectively. This work offers basic guidance to rationally design a photocatalyst for the improved separation of photoinduced electron/hole pairs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02937.Catalyst characterization, experimental details, and calculation of quantum efficiency (PDF)This article has not yet been cited by other publications.

chemistry, physical
Single- and few-layer 2H-SnS2 and 4H-SnS2 nanosheets for high-performance photodetection

Lin Wang,Xinzhe Li,Chengjie Pei,Cong Wei,Jie Dai,Xiao Huang,Hai Li

DOI: https://doi.org/10.1016/j.cclet.2021.09.094

IF: 9.1

2022-05-01

Chinese Chemical Letters

Abstract:The properties of two-dimensional (2D) materials are highly dependent on their phase and thickness. Various phases exist in tin disulfide (SnS2), resulting in promising electronic and optical properties. Hence, accurately identifying the phase and thickness of SnS2 nanosheets is prior to their optoelectronic applications. Herein, layered 2H-SnS2 and 4H-SnS2 crystals were grown by chemical vapor transportation and the crystalline phase of SnS2 was characterized by X-ray diffraction, ultralow frequency (ULF) Raman spectroscopy and high-resolution transmission electron microscope. As-grown crystals were mechanically exfoliated to single- and few-layer nanosheets, which were investigated by optical microscopy, atomic force microscopy and ULF Raman spectroscopy. Although the 2H-SnS2 and 4H-SnS2 nanosheets have similar optical contrast on SiO2/Si substrates, their ULF Raman spectra obviously show different shear and breathing modes, which are highly dependent on their phases and thicknesses. Interestingly, the SnS2 nanosheets have shown phase-dependent electrical properties. The 4H-SnS2 nanosheet shows a current on/off ratio of 2.58 × 105 and excellent photosensitivity, which are much higher than those of the 2H-SnS2 nanosheet. Our work not only offers an accurate method for identifying single- and few-layer SnS2 nanosheets with different phases, but also paves the way for the application of SnS2 nanosheets in high-performance optoelectronic devices.

chemistry, multidisciplinary
Ultra-thin CdIn2S4 nanosheets with nanoholes for efficient photocatalytic hydrogen evolution

Jingxuan He,Bo Li,Jingxia Yu,Liang Qiao,Sean Li,Xiaotao Zu,Xia Xiang

DOI: https://doi.org/10.1016/j.optmat.2020.110231

IF: 3.754

2020-10-01

Optical Materials

Abstract:Ultrathin CdIn2S4 nanosheets with a thickness of ~4 nm have been synthesized via a facile one-pot hydrothermal method with using the mixture of water and ethanol as solvent. The as-obtained CdIn2S4 ultrathin nanosheets possess many nanoholes with size ranges from 1.8 nm to 9 nm and exhibit efficient photocatalytic activity for hydrogen evolution.

materials science, multidisciplinary,optics
Engineering crystal planes and band structure of 2D tin sulfide nanosheets and its photocatalytic degradation performance

Zhixin Jia,Xiaofeng Shuai,Ruihua Zhao,Jianping Du

DOI: https://doi.org/10.1039/d3nj03896c

IF: 3.3

2023-09-27

New Journal of Chemistry

Abstract:2D tin sulfide with adjustable dual crystal plane and band gap was synthesized by one-step hydrothermal method and used for effective photodegradation of organic pollutants. The as-synthesized SnS2 showed peony flower-like structure composed of 2D nanosheets. UV-vis spectra show that the introduction of N can extend light absorption range to visible region. Compared with pristine SnS2, the as-prepared SnS2 exhibited excellent photodegradation performance for Rhodamine B removal under simulated sunlight irradiation after 120 min, the removal rate could reach 94.5%. Transient photocurrent, photoluminescence and UV-vis spectra show that this superior photocatalytic performance is due to the effective separation of photo induced carriers and the enhancement of light absorption. According to the active free radical capture experiments, the possible mechanism was proposed, which can explain the reason for the enhancement of photocatalytic ability. The results show that SnS2 is a highly-effective and metal-free photocatalyst for the removal of pollutants from wastewater. Our research provides a novel idea for the synthesis of SnS2 materials with effective removal of environmental pollutants.

chemistry, multidisciplinary
Synthesis of photoresponsive and photoemissive ultrathin 2D nanosheets of In2S3 achieved through a new single source molecular precursor

Gourab Karmakar,Adish Tyagi,Alpa Y Shah,Liladhar B Kumbhare,A P Wadawale,G Kedarnath,Vishal Singh

DOI: https://doi.org/10.1039/d2ra05000e

2022-09-27

Abstract:Indium sulfide, a two-dimensional semiconductor material, has emerged as a promising candidate for cost-effective and sustainable solar cells. This report deals with the facile preparation of colloidal In2S3 with a new ultrathin nanosheet (NS) morphology. The synthesis was mediated through a new structurally characterized single source molecular precursor. The crystal structure, phase purity, and morphology of the NSs were thoroughly investigated by pXRD, Raman, XPS, and electron microscopic techniques. AFM studies revealed that the NSs have an average thickness of ∼1.76 nm. The optical studies confirm quantum confinement in the as-prepared NSs with a blue shift in the direct band gap, which lies in the optimal range suitable for solar cell application. Furthermore, photoluminescence studies indicate strong emission by these NSs in the blue region. The as-synthesized In2S3 NSs-based prototype photoelectrochemical cell exhibit high photostability and photoresponsivity, which make them suitable candidates for sustainable solar cells.
In situ growth of 2D ZnIn 2 S 4 nanosheets on sulfur-doped porous Ti 3 C 2 T x MXene 3D multi-functional architectures for photocatalytic H 2 evolution

Ming Du,Lutao Li,Shilei Ji,Taomiao Wang,Yile Wang,Jian Zhang,Xing’ao Li

DOI: https://doi.org/10.1039/d2tc01955h

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:Designing and fabricating photocatalytic systems with multi-functional synergistic mechanisms has become the research topic in photocatalysis.

materials science, multidisciplinary,physics, applied
Synthesis and Visible Light Responsed Photocatalytic Activity of Sn Doped Bi2S3 Microspheres Assembled by Nanosheets

Yifan Jiang,Juncheng Hu,Jinlin Li

DOI: https://doi.org/10.1039/c6ra02621d

IF: 4.036

2016-01-01

RSC Advances

Abstract:The Sn4+ could act as trapping site of photo-generated electrons to promote the photocatalytic activity.
Synthesis, characterization and optical property of flower-like indium tin sulfide nanostructures.

Yongqian Lei,Yan Xing,Weiqiang Fan,Shuyan Song,Hongjie Zhang

DOI: https://doi.org/10.1039/b814602k

IF: 4

2009-01-01

Dalton Transactions

Abstract:We report a simple method for novel flower-like In4SnS8 nanostructure synthesis. A flower-like In4SnS8 nanostructure was synthesized via a one-pot hydrothermal route using the biomolecule L-cysteine as a sulfur source. The structure was characterized using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption analysis and photoluminescence spectra. This flower-like structure consists of crosslinked nanoflakes and possesses good thermostability and a high BET surface area. Photoluminescence (PL) characterization indicates that it has a blue light emission. This facile, environmental friendly, method can be extended to other ternary sulfides nanostructure syntheses.
Ultrathin {001}-oriented bismuth tungsten oxide nanosheets as highly efficient photocatalysts.

Songmei Sun,Wenzhong Wang,Ling Zhang,Erping Gao,Dong Jiang,Yongfu Sun,Yi Xie

DOI: https://doi.org/10.1002/cssc.201300406

IF: 8.4

2013-01-01

ChemSusChem

Abstract:Orient express: Ultrathin nanosheets of bismuth tungsten oxide (Bi 2WO6) with {001}-orientation are prepared by a pH-controlled synthesis. The sheets have aspect ratios as large as 30:1, and offer superior adsorption and hole oxidation properties as well as prolonged charge-carrier lifetimes.The ultrathin structures show enhanced photocatalytic activity towards organic contaminant degradation and water oxidation. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
SnS Nanoparticles and MoS2 Nanosheets Co-Decorated TiO2 Nanorod Film with Remarkable Photocatalytic and Photoelectrochemical Properties

Jiale Deng,Juan Gao,Mei Liu,Yanfen Wang,Lingcheng Zheng,Yang Li,Yin Liu

DOI: https://doi.org/10.1149/1945-7111/ac6c54

IF: 3.9

2022-05-04

Journal of The Electrochemical Society

Abstract:TiO2/SnS/MoS2 ternary nanorod arrays were synthesized on a fluorine-doped tin oxide (FTO) conductive glass by a successive hydrothermal method. The morphology, microstructure, optical properties, photodegradation activity, photoelectrochemical performance, and charge transport mechanism of TiO2/SnS/MoS2 were systematically studied. It was found that SnS and MoS2 with a narrow bandgap can facilitate light absorbance of TiO2/SnS/MoS2 heterostructures across the visible range, improving the utilization of sunlight. TiO2/SnS/MoS2 exhibits the maximum photodegradation rate (61.54%) for Rhodamine B (RhB) in 60 min with a pseudo-first-order rate constant (0.0122 min-1), which is about 5.16 times better than that of TiO2. As a photoanode, TiO2/SnS/MoS2 has the highest photocurrent (0.841 mA/cm2), which is approximately 8.32 times better than those of TiO2. The enhanced photocatalytic and photoelectrochemical performance of TiO2/SnS/MoS2 is ascribed to the Z-scheme mechanism determined by the detection of active species and the synergistic effect of SnS and MoS2 co-decoration.

electrochemistry,materials science, coatings & films
Nonlayered Tin Thiohypodiphosphate Nanosheets: Controllable Growth and Solar-Light-Driven Water Splitting

Marshet G. Sendeku,Fengmei Wang,Zhongzhou Cheng,Peng Yu,Ning Gao,Xueying Zhan,Zhenxing Wang,Jun He

DOI: https://doi.org/10.1021/acsami.1c00038

2021-03-15

Abstract:As a promising candidate in various fields, including energy conversion and electronics, layered van der Waals metal phosphorus trichalcogenides (MPX3) have been widely explored. In addition to the layered structures, MPX3 comprising post-transition metals (i.e., Sn and Pb) are known to form a unique 3D framework with nonlayered structure. However, the nonlayered two-dimensional (2D) crystals of this family have remained unexplored until now. Herein, we successfully synthesized 2D nonlayered tin thiohypodiphosphate (Sn2P2S6) nanosheets, having an indirect bandgap of 2.25 eV and a thickness down to ∼10 nm. The as-obtained nanosheets demonstrate promising photocatalytic water splitting activity to generate H2 in pure water under simulated solar light (AM 1.5G). Moreover, the ultrathin Sn2P2S6 catalyst shows auspicious performance and stability with a continuous operation of 40 h. This work is not only an expansion of the MPX3 family, but it is also a major milestone in the search for new materials for future energy conversion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00038?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00038</a>.Figure S1, SEM images of as-obtained SnS2 nanosheet under different magnification; Figure S2, SEM image of Sn2P2S6 nanosheets grown on the surface of carbon cloth; Figure S3, SEM image of Sn2P2S6 nanosheets grown on fluorine-doped tin oxide substrate and XRD pattern for as-prepared Sn2P2S6 on an FTO substrate; Figure S4, SEM image and XRD pattern of irregular Sn2P2S6 crystals synthesized at 380 °C; Figure S5, full XPS spectra collected from Sn2P2S6 nanosheets; Figure S6, ultraviolet photoelectron spectra conducted on the Sn2P2S6 nanosheet film; Figure S7, photocatalytic hydrogen evolution of irregular Sn2P2S6 crystals in pure water under simulated solar light illumination; Figure S8, XRD pattern comparison of the initial Sn2P2S6 photocatalyst and the one after longterm stability test in pure water for hydrogen evolution; Figure S9, photocatalytic hydrogen evolution of Sn2P2S6 in the presence of Na2S/Na2SO3 as a hole scavenger under simulated solar light illumination; Table S1, comparison of the photocatalytic H2 evolution performance of Sn2P2S6 with other reported MPX3 based materials; and additional references (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00038/suppl_file/am1c00038_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Fabrication of Ultrathin Bi2 S3 Nanosheets for High-Performance, Flexible, Visible-NIR Photodetectors.

Guihuan Chen,Yongqiang Yu,Kun Zheng,Tao Ding,Wenliang Wang,Yang Jiang,Qing Yang

DOI: https://doi.org/10.1002/smll.201403508

IF: 13.3

2015-01-01

Small

Abstract:Ultrathin Bi2 S3 nanosheets with thicknesses down to 2.2 nm are fabricated. The resultant ultrathin Bi2 S3 -based photoconductor shows high sensitivity to visible-near infrared light from 405 to 780 nm with a high external photoresponsivity up to 4.4 A W(-1) , high detectivity of ≈10(11) Jones, relatively fast response time of ≈10 μs, and high flexibility and durability.
Visible-light-driven Photocatalytic and Photoelectrochemical Properties of Porous SnSx(x = 1,2) Architectures

Yuan Dong

DOI: https://doi.org/10.1039/c2ce06586j

IF: 3.756

2012-01-01

CrystEngComm

Abstract:By using a facile and template-free polyol refluxing process, we reported the successful synthesis of porous SnS and SnS2 architectures on a large scale. The as-synthesized samples were characterized by using XRD, SEM, TEM, UV-vis DRS, Raman and N2 adsorption–desorption analyses. Studies revealed that the as-synthesized SnS and SnS2 products mainly consist of porous flower-like microstructures with reasonable BET surface areas of 66 m2 g−1 and 33 m2 g−1, respectively. Photocatalytic properties of trace amounts of samples were investigated by photodegradation of MB and RhB under visible light irradiation. The photoelectrochemical properties of both samples were also studied by configuring the samples as photoelectrochemical (PEC) cells, exhibiting excellent photosensitivity and response with greatly enhanced Ion/off as high as 1.4 × 103, three orders of magnitude higher than previous work. The results indicate the potential applications of the SnSx nanostructures in visible-light-driven photocatalysts, high response photodetectors and other optoelectronic nanodevices.
Large-Scale Manual Grinding Preparation of Ultrathin Porous Sulfur (S 8 )-Anchored ScOOH Nanosheets for Photothermal Conversion and Dye Adsorption

Bin-Bin Chen,Yue Wang,Shuai Chang,Ya-Ting Gao,Ruo-Can Qian,Da-Wei Li

DOI: https://doi.org/10.1021/acsanm.2c03288

IF: 6.14

2022-09-28

ACS Applied Nano Materials

Abstract:Porous two-dimensional (2D) nanomaterials have attracted much attention in recent years and shown unique electronic and physicochemical properties by utilizing the advantages of both porous structure and 2D architecture. However, the low-cost, large-scale, and high-quality synthesis of porous 2D nanomaterials is still very challenging. Herein, for the first time, we develop a facile manual grinding strategy for the preparation of ultrathin porous sulfur (S8)-anchored ScOOH nanosheets (S8/ScOOH-NSs) by the mechanical stripping of S8-anchored ScOOH nanorods (S8/ScOOH-NRs). The formation of S8/ScOOH-NSs should be due to the intrinsic lamellar structure of S8/ScOOH-NRs. The obtained S8/ScOOH-NSs with rich mesopores have a high-quality crystal structure. Because of hydrophobic sulfur and carbon components on the surface, S8/ScOOH-NSs show good hydrophobicity. In addition, S8/ScOOH-NSs exhibit more excellent photothermal conversion efficiency and adsorption capacity compared with S8/ScOOH-NRs, which is directly attributed to the synergistic effect of sulfur-doping, porous structure, and 2D architecture. Therefore, the facile and large-scale synthesis strategy endows S8/ScOOH-NSs with multifunctional properties that have great application prospects in water cleaning and photothermal evaporators.

materials science, multidisciplinary,nanoscience & nanotechnology
Colloidal Tin Sulfide Nanosheets: Formation Mechanism, Ligand-mediated Shape Tuning and Photo-detection

Fu Li,Mohammad Mehdi Ramin Moayed,Frauke Gerdes,Sascha Kull,Eugen Klein,Rostyslav Lesyuk,Christian Klinke

DOI: https://doi.org/10.1039/C8TC02559B

2018-08-13

Abstract:Colloidal materials of tin(II) sulfide (SnS), as a layered semiconductor with a narrow band gap, are emerging as a potential alternative to the more toxic metal chalcogenides (PbS, PbSe, CdS, CdSe) for various applications such as electronic and optoelectronic devices. We describe a new and simple pathway to produce colloidal SnS nanosheets with large lateral sizes and controllable thickness, as well as single-crystallinity. The synthesis of the nanosheets is achieved by employing tin(II) acetate as tin precursor instead of harmful precursors such as bis[bis(trimethylsilyl)amino] tin(II) and halogen-involved precursors like tin chloride, which limits the large-scale production. We successfully tuned the morphology between squared nanosheets with lateral dimensions from 150 to about 500 nm and a thickness from 24 to 29 nm, and hexagonal nanosheets with lateral sizes from 230 to 1680 nm and heights ranging from 16 to 50 nm by varying the ligands oleic acid and trioctylphosphine. The formation mechanism of both shapes has been investigated in depth, which is also supported by DFT simulations. The optoelectronic measurements show their relatively high conductivity with a pronounced sensitivity to light, which is promising in terms of photo-switching, photo-sensing, and photovoltaic applications also due to their reduced toxicity.

Materials Science
2D Z-scheme TiO 2 /SnS 2 heterojunctions with enhanced visible-light photocatalytic performance for refractory contaminants and mechanistic insights

Juan Gao,Xiaowei Sun,Lingcheng Zheng,Gang He,Yanfen Wang,Yang Li,Yin Liu,Jiale Deng,Mei Liu,Jintao Hu

DOI: https://doi.org/10.1039/d1nj02247d

IF: 3.3

2021-01-01

New Journal of Chemistry

Abstract:The Z-scheme TiO 2 /SnS 2 nanosheet heterojunctions significantly broaden the visible photoabsorption region and accelerate the separation of e–h pairs, thereby resulting in a higher photocatalytic activity for refractory contaminants.

chemistry, multidisciplinary

In<sub>4</sub>SnS<sub>8</sub>ultrathin nanosheets: a ternary sulfide with fast adsorption–visible-light photocatalysis dual function

In4SnS8 ultrathin nanosheets: a ternary sulfide with fast adsorption–visible-light photocatalysis dual function

In Situ Synthesis of Metal Sulfide Nanoparticles Based on 2D Metal-Organic Framework Nanosheets.

Insights into the Enhanced Adsorption/photocatalysis Mechanism of a Bi4O5Br2/g-C3N4 Nanosheet

Facile Synthesis of Tin Monosulfide Nanosheets Via Physical Vapour Deposition and Their Near-Infrared Photoresponse

Distortion of the Coordination Structure and High Symmetry of the Crystal Structure in In 4 SnS 8 Microflowers for Enhancing Visible-Light Photocatalytic CO 2 Reduction

Single- and few-layer 2H-SnS2 and 4H-SnS2 nanosheets for high-performance photodetection

Ultra-thin CdIn2S4 nanosheets with nanoholes for efficient photocatalytic hydrogen evolution

Engineering crystal planes and band structure of 2D tin sulfide nanosheets and its photocatalytic degradation performance

Synthesis of photoresponsive and photoemissive ultrathin 2D nanosheets of In2S3 achieved through a new single source molecular precursor

In situ growth of 2D ZnIn 2 S 4 nanosheets on sulfur-doped porous Ti 3 C 2 T x MXene 3D multi-functional architectures for photocatalytic H 2 evolution

Synthesis and Visible Light Responsed Photocatalytic Activity of Sn Doped Bi2S3 Microspheres Assembled by Nanosheets

Synthesis, characterization and optical property of flower-like indium tin sulfide nanostructures.

Ultrathin {001}-oriented bismuth tungsten oxide nanosheets as highly efficient photocatalysts.

SnS Nanoparticles and MoS2 Nanosheets Co-Decorated TiO2 Nanorod Film with Remarkable Photocatalytic and Photoelectrochemical Properties

Nonlayered Tin Thiohypodiphosphate Nanosheets: Controllable Growth and Solar-Light-Driven Water Splitting

Fabrication of Ultrathin Bi2 S3 Nanosheets for High-Performance, Flexible, Visible-NIR Photodetectors.

Visible-light-driven Photocatalytic and Photoelectrochemical Properties of Porous SnSx(x = 1,2) Architectures

Large-Scale Manual Grinding Preparation of Ultrathin Porous Sulfur (S 8 )-Anchored ScOOH Nanosheets for Photothermal Conversion and Dye Adsorption

Colloidal Tin Sulfide Nanosheets: Formation Mechanism, Ligand-mediated Shape Tuning and Photo-detection

2D Z-scheme TiO 2 /SnS 2 heterojunctions with enhanced visible-light photocatalytic performance for refractory contaminants and mechanistic insights