Abstract:Industrial-use VOx-based catalysts usually have a higher active temperature window (> 250-300°C), which becomes a “bottleneck” for the practical application of PCDD/Fs catalytic degradation technology. In this work, VOx-FeOx/TiO2 catalyst prepared via mechanochemically method was investigated for the catalytic removal of PCDD/Fs. The removal efficiency of 1,2-DCBz, pure PCDD/Fs gas generated in the lab, PCDD/Fs from actual flue gas, long-term were studied, and the degradation mechanism was explored using FTIR and TOFMS. The degradation efficiency of 1,2-DCBz and PCDD/Fs on VOx-FeOx/TiO2 were higher than that of VOx/TiO2 catalyst, and the optimal FeOx addition ratio was 3 wt.%. The characterization results show that the addition of FeOx can effectively improve the pore structure, surface acidity, and VOx dispersion of the catalyst, thus contributing to increasing the V5+ content and surface-active oxygen, which is conducive to the improvement of adsorption and redox performance of the catalyst. Under the actual MSWI (municipal solid waste incineration) flue gas, the PCDD/Fs removal efficiency over VTi-3Fe-MC maintained long-term stability, higher than 85% for 240 min. This result was not significantly reduced compared with the data obtained in the laboratory. According to the analysis results of intermediate products by FTIR and GC-TOFMS, it can be inferred that the epoxidation fracture of benzene ring is the rate-limiting step of dioxin catalytic degradation reaction. This work gives an in-depth view into the PCDD/Fs removal over VOx-FeOx/TiO2 catalysts and could provide guidelines for the rational design of reliable catalysts for industrial applications.

The Progress of V<sub>2</sub>O<sub>5</sub>/TiO<sub>2</sub>-Based Catalyst in Hg<sup>0</sup> Removal and PCCD/Fs Decomposition

The Progress Of V2o5/Tio2-Based Catalyst In Hg-0 Removal And Pccd/Fs Decomposition1`

Vanadium-density-dependent reactivity for simultaneous removal of NOx and Hg0 over V2O5/TiO2 catalyst

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

The Effect of Cr Addition on Hg0 Oxidation and NO Reduction over V2O5/TiO2 Catalyst

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Structure-Directing Role of Support on Hg0 Oxidation over V2O5/TiO2 Catalyst Revealed for NOx and Hg0 Simultaneous Control in an SCR Reactor.

The Performance of Ag Doped V2O5–TiO2catalyst on the Catalytic Oxidation of Gaseous Elemental Mercury

NOxRemoval over V2O5/WO3–TiO2Prepared by a Grinding Method: Influence of the Precursor on Vanadium Dispersion

A Tale of Two Pollutants: the Mutual Promotion Mechanism of Synergistic Catalytic Elimination of Hg0 and Chlorobenzene on V2O5–WO3/TiO2 Catalyst

To be support or promoter: the mode of introducing ceria into commercial V2O5/TiO2 catalyst for enhanced Hg0 oxidation

New Insights into the Promotional Effects of Cu and Fe over V2O5-WO3/TiO2 NH3-SCR Catalysts Towards Oxidation of Hg0

Dispersion of Tungsten Oxide on SCR Performance of V2O5WO3/TiO2: Acidity, Surface Species and Catalytic Activity

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Dispersion State and Catalytic Properties of Vanadia Species on the Surface of V 2 O 5 /tio 2 Catalysts

The Properties and SCR De‐nox Application of Supported V2O5/TiO2 Catalysts with Different Polymerization State of VOx Species Controlled by the Ph Value of Their Precursors

Disposal of spent V2O5-WO3/TiO2 catalysts: A regeneration principle based on structure-activity relationships from carrier transformations

Structure-Directing Role of Support on Hg 0 Oxidation over V 2 O 5 /TiO 2 Catalyst Revealed for NO x and Hg 0 Simultaneous Control in an SCR Reactor

The Effect of Additives and Intermediates on Vanadia-Based Catalyst for Multi-Pollutant Control

Improvement mechanism of Ru species on Hg0 oxidation reactivity over V2O5/TiO2 Catalyst: A density functional theory study

Catalytic oxidation of CO over V2O5/TiO2 and V2O5-WO3/TiO2 catalysts: A DFT study