Abstract:Crystallization kinetics of the Zr70-xNi14+xAl16 (x = 0, 5, 10, 15, and 20 at.%) metallic glasses (MGs) was investigated using the non-isothermal and isothermal methods, respectively. The crystallization of the Zr70-xNi14+xAl16 (x = 15 and 20 at%) MGs proceeds by the nucleation and growth of Zr2Ni3Al5 and Zr6NiAl2 crystals. The crystallization sequence of the Zr70-xNi14+xAl16 (x = 0, 5, and 10 at.%) MGs can be concluded as follows: amorphous phase -> amorphous phase + Zr2Ni3Al5 + ZrNiAl crystals -> Zr6NiAl2 crystals. The crystallization kinetics of the initial and intermediate stages for the present system changes from the diffusion-controlled one-dimensional growth to two-and three-dimensional growth. Compared with the Zr70-xNi14+xAl16 (x = 15 and 20 at.%) MGs, the nucleation and growth during the initial crystallization of the Zr70-xNi14+xAl16 (x = 0, 5, and 10 at,%) MGs are relatively faster, which should be contributed to their lower activation energies for initial crystallization. The subsequent crystallization proceeds by a slower nucleation and growth compared with the Zr70-xNi14+xAl16 (x = 15 and 20 at.%) MGs, which should be suppressed by the endothermic phase transition from Zr2Ni3Al5 and ZrNiAl crystals to Zr6NiAl2 crystals. The present studies could give a complementary understanding on crystallization behaviors of metastable alloys. (C) 2018 Elsevier Ltd. All rights reserved.

Effect of Minor Alloying Substitution on Glass-Forming Ability and Crystallization Behavior of a Ni<sub>57</sub>Zr<sub>22</sub>X<sub>8</sub>Nb<sub>8</sub>Al<sub>5</sub> (X = Ti, Cu) Alloy Synthesized by Mechanical Alloying

Effects of the partial substitutional alloying elements on the crystallization behavior of Mg65Cu25Gd10 metallic glass: Ag versus Ni

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5(X = Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions

Effect of Ti addition on supercooled liquid region and glass forming ability of bulk amorphous Zr60Cu20Ni10-xAl10Tix alloys

Cu-alloying Effect on Crystallization Kinetics of Ti41Zr25Be28Fe6 Bulk Metallic Glass

The Effect of Ni Substitution on the Glass-Forming Ability and Mechanical Properties of Mg–Cu–Gd Metallic Glass Alloys

Effect of Ti and Al Ratio on Glass Forming Ability and Crystallization Behavior of Zr-Cu-Al-Ti Alloy Powders

Compositional Dependence of Crystallization Kinetics in Zr-Ni-Al Metallic Glasses

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass

EFFECT OF Ti ADDITION ON THE GLASS--FORMING ABILITY OF (Zr0.59cu0.18ni0.13al0.10)100-Xtix ALLOYS

Effects Of Ta, Nb And Mo Additions On Glass-Forming Ability Of Ti50ni20cu25sn5 Amorphous Alloy

Crystallization behaviour and thermal stability of two aluminium-based metallic glass powder materials

Effect of Ti Addition on Crystallization Behavior of a Zr-based Bulk Metallic Glass

Influence of Substitution of Cu by Ni on the Crystallization Kinetics of TiZrHfBeCu High Entropy Bulk Metallic Glass

Enhance the Thermal Stability and Glass Forming Ability of Al-based Metallic Glass by Ca Minor-Alloying

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Effects of Nb Addition on Icosahedral Quasicrystalline Phase Formation and Glass-Forming Ability of Zr–Ni–Cu–Al Metallic Glasses

Effect of Ag Content on Thermal Stability and Crystallization Behavior of Zr-Cu-Ni-Al-Ag Bulk Metallic Glass

Mechanism of Ag and Al on improving the glass forming ability of CuZr-based alloys