Abstract:Glasses, which date back to about 2500 BC, originated in Mesopotamia and were later brought to Egypt in approximately 1450 BC. In contrast to the long-range order materials (crystalline materials), the atoms and molecules of glasses, which are noncrystalline materials (short-range order) are not organized in a definite lattice pattern. Metallic glassy materials with amorphous structure, which are rather new members of the advanced materials family, were discovered in 1960. Due to their amorphous structure, metallic glassy alloys, particularly in the supercooled liquid region, behave differently when compared with crystalline alloys. They reveal unique and unusual mechanical, physical, and chemical characteristics that make them desirable materials for many advanced applications. Although metallic glasses can be produced using different techniques, many of these methods cannot be utilized to produce amorphous alloys when the system has high-melting temperature alloys (above 1500 °C) and/or is immiscible. As a result, such constraints may limit the ability to fabricate high-thermal stable metallic glassy families. The purpose of this research is to fabricate metallic glassy (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, and 35 at. %) by cold rolling the constituent powders and then mechanically alloying them in a high-energy ball mill. The as-prepared metallic glassy powders demonstrated high-thermal stability and glass forming ability, as evidenced by a broad supercooled liquid region and a high crystallization temperature. The glassy powders were then consolidated into full-dense bulk metallic glasses using a spark plasma sintering technique. This consolidation method did not result in the crystallization of the materials, as the consolidated buttons retained their short-range order fashion. Additionally, the current work demonstrated the capability of fabricating very large bulk metallic glassy buttons with diameters ranging from 20 to 50 mm. The results indicated that the microhardness of the synthesized metallic glassy alloys increased as the W concentration increased. As far as the authors are aware, this is the first time this metallic glassy system has been reported.

Crystallization behaviour and thermal stability of two aluminium-based metallic glass powder materials

Glass-forming ability and thermal stability of Gd55-xNd xCo20Al25 metallic glass

Crystallization behaviour of Al-based metallic glasses below and above the glass-transition temperature

Untypical changes of electrical resistivity and viscosity of the La60Ni10Al25Cu5 metallic glass during crystallization

Tuning Non-Isothermal Crystallization Kinetics between Fe20Co20Ni20Cr20(P0.45B0.2C0.35)20 High-Entropy Metallic Glass and the Predecessor Fe75Cr5P9B4C7 Metallic Glass

Crystallization Kinetics in Cu35ag15zr45al15 Metallic Glass

Crystallization behavior of ZrAlNiCu bulk metallic glass with wide supercooled liquid region

Kinetics and crystallization path of a Fe-based metallic glass alloy

Thermal stability, phase transformations and mechanical properties of a Fe64B24Y4Nb6 metallic glass

Analysis of the Crystallization Kinetics and Thermal Stability of the Amorphous Mg72Zn24Ca4 Alloy

Primary crystallization in Al-rich metallic glasses at unusually low temperatures

Phase Transformations from Nanocrystalline to Amorphous (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, 35 at. %) and Subsequent Consolidation

Crystallization kinetics of GdYScAlCo high-entropy bulk metallic glass

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

Beating Homogeneous Nucleation and Tuning Atomic Ordering in Glass-Forming Metals by Nanocalorimetry

Enhance the Thermal Stability and Glass Forming Ability of Al-based Metallic Glass by Ca Minor-Alloying

Crystallization Path and Non-Isothermal Kinetics of the Zr59.5Cu14.4Ni11.6Al9.7Nb4.8 Metallic Glass under Different Heating Rates

Isothermal and non-isothermal crystallization kinetics of novel metalloid-bearing light rare-earth-based La64Al26Ga4C6 metallic glass with high thermal stability

High thermal stability of residual amorphous regions in metallic glasses

Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5(X = Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass