Abstract:(1-x)(Li0.02Na0.48K0.48Ag0.02)(Nb0.95Sb0.05)O-3-x(Ba0.4Bi0.3Na0.3)ZrO3 (LNKANbS-xBBiNZ, x = 0.04, 0.045, 0.05, 0.055 and 0.06) lead-free piezoelectric ceramics were prepared by the conventional solid-state reaction method via the two-step sintering route. The effects of the content of BBiNZ on electrical properties and microstructural morphology of the LNKANbS-xBBiNZ ceramics were studied systematically. The designing of forming rhombohedral-tetragonal phase boundary in the LNKANbS-xBBiNZ system is confirmed by XRD Rietveld refinement and Raman spectroscopy, whose phase proportion is affected greatly by the BBiNZ amount. The LNKANbS-xBBiNZ ceramics exhibit complicated dielectric behavior, whose dielectric response characteristic can be fitted by the quadratic law and the Curie-Weiss law, and both having some deviation. The high-temperature conductivity of the LNKANbS-0.045BBiNZ ceramics is controlled by oxygen vacancies detected by both conductive activation energy and relaxation activation energy fitting. The LNKANbS-0.045BBiNZ ceramics exhibit excellent electrical properties, correlating with appropriate R-T phase composition proportion and improved densification and microstructural homogeneity obtained by adjusting the BBiNZ content and using the two-step sintering method.

Na<sub>1-x</sub>K<sub>x</sub>NbO<sub>3</sub> (x=0.2~0.8) Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering

Na1-xKxNbO3 (x=0.2~0.8) Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering

SPS Sintering of NaNbO3-KNbO3 Piezoelectric Ceramics

Effects of Na Excess on the Preparation and Characterization of (K0.5na0.5)nbo3ceramics

Ferroelectric and Piezoelectric Properties of Fine‐Grained Na0.5K0.5NbO3 Lead‐Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering

Compositional dependence of piezoelectric properties in Na xK 1-xNbO 3 lead-free ceramics prepared by spark plasma sintering

Lead-free Na0.5K0.5NbO3 Piezoelectric Ceramics Fabricated by Spark Plasma Sintering: Annealing Effect on Electrical Properties

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Piezoelectric and Dielectric Properties of (Na<sub>0.5</sub>K<sub>0.5</sub>)NbO<sub>3</sub>–(Bi<sub>0.5</sub>Na<sub>0.5</sub>)<sub>0.94</sub>Ba<sub>0.06</sub>TiO<sub>3</sub>Lead-Free Piezoelectric Ceramics

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Sintering and Electrical Properties of Lead-Free Na0.5k0.5nbo3 Piezoelectric Ceramics

Sintering properties of K_(0.5)Na_(0.5)NbO_3 lead-free piezoelectric ceramics

Microstructure and Electrical Properties of (na 1.015−x K X )nbo 3 Lead-Free Piezoceramics

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Piezoelectric Properties of Low-Temperature Sintered Li-Modified (na, K)Nbo3 Lead-Free Ceramics

Piezoelectric And Dielectric Properties Of (Na0.5k0.5)Nbo3-(Bi0.5na0.5)(0.94)Ba0.06tio3 Lead-Free Piezoelectric Ceramics

Phase transition, microstructure and electrical properties of K1‐xNaxNbO3‐based ceramic sintered in reducing atmosphere

Piezoelectric properties of (K0.5Na0.5)NbO3-BaTiO3 lead-free ceramics prepared by spark plasma sintering

(Bi0.5na0.5)(zr0.97w0.01fe0.02)o3 Doping Effects on KNN‐based Lead‐free Ceramics Prepared Via Two‐step Sintering Technique

Crystal structures and electrical properties of (1−x)K0.5Na0.5NbO3–xBi0.8La0.2FeO3 lead-free ceramics

Na&lt;sub&gt;1-x&lt;/sub&gt;K&lt;sub&gt;x&lt;/sub&gt;NbO&lt;sub&gt;3&lt;/sub&gt; (x=0.2~0.8) Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering