Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Piezoelectric properties of (K0.5Na0.5)NbO3-BaTiO3 lead-free ceramics prepared by spark plasma sintering

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Piezoelectric and dielectric properties of (Na0.5K 0.5)NbO3-Bi0.5(Na0.8K 0.2)0.5TiO3 lead-free ceramics

Phase Structure and Electrical Properties of Lead-Free (0.96Bi_(0.5)Na_(0.5)TiO_3~-0.04BaTiO_3)-(0.98K_(0.5)Na_(0.5)NbO_3~-0.02LiTaO_3) Piezoelectric Ceramics

Piezoelectric And Dielectric Properties Of (Na0.5k0.5)Nbo3-(Bi0.5na0.5)(0.94)Ba0.06tio3 Lead-Free Piezoelectric Ceramics

Piezoelectric and Dielectric Properties of (Na<sub>0.5</sub>K<sub>0.5</sub>)NbO<sub>3</sub>–(Bi<sub>0.5</sub>Na<sub>0.5</sub>)<sub>0.94</sub>Ba<sub>0.06</sub>TiO<sub>3</sub>Lead-Free Piezoelectric Ceramics

SPS Sintering of NaNbO3-KNbO3 Piezoelectric Ceramics

Effect Of (Bi0.5k0.5)Tio3 On The Electrical Properties, Thermal And Fatigue Behavior Of (K0.5na0.5)Nbo3-Based Lead-Free Piezoelectrics

Phase Characteristics and Piezoelectric Properties in the Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub>-K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>System

Electrical Properties Of K0.5na0.5nbo3 Lead-Free Piezoceramics By Pressureless Sintering

(K, Na)NbO 3 -based lead-free piezoceramics: Phase transition, sintering and property enhancement

Phase Characteristics And Piezoelectric Properties In The Bi0.5na0.5tio3-Batio3-K0.5na0.5nbo3 System

BNH doping enhances the piezoelectric properties and temperature stability of KNN-based lead-free piezoelectric ceramics

Electrical Properties of K_(0.5)Na_(0.5)NbO_3 Lead-free Piezoceramics by Pressureless Sintering

Effect of (Bi 0.5 K 0.5 )TiO 3 on the electrical properties, thermal and fatigue behavior of (K 0.5 Na 0.5 )NbO 3 -based lead-free piezoelectrics

Ferroelectric and Piezoelectric Properties of Fine‐Grained Na0.5K0.5NbO3 Lead‐Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering

Determination of the superstructure of lead free piezoelectric ceramics (BNT-BT-KNN)

Enhancement of piezoelectric properties and temperature stability by forming an MPB in KNN-based lead-free ceramics

Structure and Electrical Properties of Lead-Free (Na 0.5 K 0.5 )NbO 3 -BaTiO 3 Ceramics