Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Direct Femtosecond Laser Inscription of Bragg Gratings in Ho3+/Pr3+ Co-Doped AlF3-based Glass Fibers for a 2.86 Μm Laser.

Femtosecond Laser Inscription of Bragg Gratings in Tm3+-doped Fluorotellurite Glass Fibers for Lasing at 2.3 Μm

Wavelength extension beyond 3 μm in Ho3+/Pr3+ co-doped AlF3-based fiber laser

Ho3+/Pr3+ Co-Doped AlF3 Based Glass Fibers for Efficient ~2.9 Μm Lasers

Ho3+-doped AlF3–TeO2-based Glass Fibers for 2.1µm Laser Applications

Double-clad Tm3+-doped Silica Fiber Laser with Bragg Grating Inscribed Directly into Active Core by Femtosecond Laser

Mid-infrared microfiber Bragg gratings

Ho3+ Doped Fluoroaluminate Glass Fibers for 2.9 Mu M Lasing

Direct femtosecond laser writing fiber Bragg gratings in double-D cladding chalcogenide glass infrared fibers

Efficient 2075-nm laser emission from Ho3+-doped fluorotellurite glass in a compact all-fiber structure

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

2875 Nm Lasing from Ho 3+ -Doped Fluoroindate Glass Fibers

Ytterbium Fiber Laser Based on Fiber Bragg Grating Inscribed Point-by-point with Femtosecond Laser

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

2.3 Μm Lasing in Tm3+ Doped Fluoroaluminate Glass Fibers with an Upconversion Pumping Scheme

The Large Core Diameter Fiber Bragg Grating Written by Femtosecond Laser

Femtosecond Laser Modification of Silica Optical Waveguides for Potential Bragg Gratings Sensing

Direct Laser Writing of a Helical Bragg Grating in a Silica Glass Vortex Fiber

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Femtosecond Laser Inscription of FBGs in Ytterbium-Doped Fiber Based on Fluorescence Detection Techniques

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser