Abstract:With the aid of virtual prototyping and casting numerical simulation, this work presents the optimization of an injection system used in a non-traditional investment casting process that applies perpendicular centrifugal force to inject the molten metal into refractory plaster molds. In this study, advanced techniques of simulation and production of complex geometries in Computer-Aided Design CAD (Computer-Aided Design) are used in the design of the casting system of a miniaturized simple-cubic cell structure. The cast part has a complex shape profile and needs a high surface finish with strict dimensional tolerance. The alloy used to fill the mold is an aluminum bronze shape memory alloy (SMA). CAD was used to model the part and the proposed models for casting optimization. ProCAST software was used for the numerical simulation of the casting process. Experimental parameters were used as input data for the numerical simulation. The simulation results were analyzed focusing on the identification of defects in the Cu–Al–Mn SMA simple-cubic structures. Different feeding systems have been designed to eliminate the identified defects. Concerning the molten recirculation, the optimal nozzle model has a truncated cone profile, with a larger radius of 6.5 mm, a smaller radius of 2.0 mm and a height of 8.0 mm (called here model 3). Experimental observations from cast SMA parts agree with the simulated results of the optimized nozzle model 3. In addition to the elimination of alloy recirculation with the nozzle optimization in this work, the shrinkage porosity at the upper base of the part was eliminated with the addition of a compensation volume close to the region where porosity is more intense. By exploring the possibilities offered by commercial software, the work contributes to advance the knowledge and application of the non-traditional investment casting process, highlighting its advantages and potential applications.

Improving Metal Flow in Lost Foam Casting Through Use of Low Thermal Degradation Hot Melt Adhesives

Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles

Porosity of aluminum alloy in lost foam casting process

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs

Tailoring flow behavior and heat transfer in tempering channels for high-pressure die casting—analysis of potentials of commercial static mixers and prospects of additive manufacturing

Mass Transfer of Lost Foam Casting and Its Influence on the Casting Quality

Increasing the Sustainability of the Hybrid Mold Technique through Combined Insert Polymeric Material and Additive Manufacturing Method Design

Mesostructural Design and Manufacturing of Open-Pore Metal Foams by Investment Casting

Impact of Carbon Fiber Content and Length on the Rheological Properties and Coating Performance for Lost Foam Casting

Experimental Study on the Filling Process of the Lost Foam Casting Process of a Cast Iron Plate

Heat Transfer Analysis of 3D Printed Wax Injection Mold Used in Investment Casting

Metal casting using soluble pattern produced via additive manufacturing

Study on the Cavity Defects of Low-Pressure Lost Foam Casting for Magnesium Alloy

Improved metal-adhesive polymers from copper(I)-catalyzed azide-alkyne cycloaddition

Additive manufacturing-driven mold design for castings

Investigation of a Template‐Based Process Chain for Investment Casting of Open‐Cell Metal Foams

Optimizing the Gating System for Rapid Investment Casting of Shape Memory Alloys: Computational Numerical Analysis for Defect Minimization in a Simple-Cubic Cell Structure

Experimental and simulation study for rewelding defects during the flow process of Semi-solid die casting

Rapid Casting of Complex Impeller Based on 3D Printing Wax Pattern and Simulation Optimization

Research on the Improvement of Soundness AG 40 A Zinc Alloy Casting

The effect of dielectric and thermal properties of plastic mold materials on the high frequency welding of three‐dimensional foam components