Abstract:High-pressure die casting (HPDC) is a widely used process with short cycle times to manufacture complex shapes of aluminium castings for the automotive industry. Most of the die casting companies use specialized commercial software to simulate molten metal filling and solidification. This approach works satisfactorily and is industrially accepted for defect prediction capability. Die cooling is an effective technique to reduce internal porosity in die cast components. But die cooling process is not completely captured in the approach used in the casting simulations. This often resulted in false positives in the defect predictions. One of the main reasons for the lack of precision in simulation is the uncertainty in assigning the boundary conditions such as heat transfer coefficients (HTC) for the die cooling channel. In this study, a coupled simulation strategy was developed to determine accurate HTC values of the die cooling channel. The computational domain was divided into two sub-domains, i.e. , casting zone and die cooling zone. Two different industrially accepted simulation tools were used: (a) for casting simulation and (b) for turbulent fluid flow and heat transfer simulation in the cooling channel. A series of iterations were performed by exchanging information at the interface between the two sub-domains till the convergence was achieved. Experiments were also conducted with a thermocouple inserted in the die and the actual die temperature readings were measured. The converged simulation results agreed well with the experimental measurements. Also, the influence of flow rate on HTC was studied by conducting experiments with two different flow rates and the castings produced were analyzed with the help of CT scan analysis, micro-structure evaluation and thermal imaging. The obtained results demonstrated the efficacy of the method adopted in prescribing the values of heat transfer conditions in casting simulations. With the coupled simulation approach developed in this work, parametric studies were conducted to maximize the heat removal rate from a given die, for different flow velocities, nozzle diameters, cooling hole diameters and nozzle-to-surface spacings.

Tailoring flow behavior and heat transfer in tempering channels for high-pressure die casting—analysis of potentials of commercial static mixers and prospects of additive manufacturing

Development of a New Cold Metal Transfer Arc Additive Die Manufacturing Process

Innovative Liquid Metal Strategy for Real-time Thermal Control in Additive Manufacturing

Advancements in the manufacturing of dies for hot aluminum extrusion with conformal cooling channels

Integration of Additive Fabrication with High-Pressure Die Casting for Quality Structural Castings of Aluminium Alloys; Optimising Energy Consumption

Development of a Laser Powder Bed Fusion Process Tailored for the Additive Manufacturing of High-Quality Components Made of the Commercial Magnesium Alloy WE43

A versatile SPH modeling framework for coupled microfluid-powder dynamics in additive manufacturing: binder jetting, material jetting, directed energy deposition and powder bed fusion

Design and additive manufacturing of novel conformal cooling molds

A novel smoothed particle hydrodynamics formulation for thermo-capillary phase change problems with focus on metal additive manufacturing melt pool modeling

Heterogeneous Material Additive Manufacturing for Hot-Stamping Die

Study of Flow and Heat Transfer in High Pressure Die Casting Cooling Channel

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

The effects of hot forging on the preform additive manufactured 316 stainless steel parts

A highly efficient computational approach for fast scan-resolved simulations of metal additive manufacturing processes on the scale of real parts

A Novel High-Efficiency Methodology for Metal Additive Manufacturing

Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels

Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process

Pilot Demonstration of Hot Sheet Metal Forming Using 3D Printed Dies

Evaluating the Application of Heating Conductor Surfaces Inside Plasma Sprayed Coatings in Permanent Mold Metal Casting Processes for Local, Near-Surface Heat Release

Integration of Additive Manufacturing in Casting: Advances, Challenges, and Prospects

Predicting and correlating melt pool characteristics with processing parameters in IN625 powder bed fusion additive manufacturing