Abstract:In a sealed electromagnetic relay, the change in the surface roughness mainly depends on the collision wear between the contact and the moving reed and the ablation effect of the arc on the contact surface based on the strong correlation between the contact resistance and the surface roughness of the Ag-Mg-Ni contact. With a change in contact resistance, the contact temperature increase in a hermetically sealed electromagnetic relay (HSER) is greatly affected. Under extreme overload conditions, the contact surface is severely ablated by the arc, and the roughness increases rapidly with the number of cycles, which greatly affects the contact resistance of the contact surface and the reliability of the relay. A thermal model of a relay contact system based on the surface roughness of Ag-Mg-Ni contacts was established in this paper by analyzing the effect of an arc on the surface roughness of Ag-Mg-Ni contacts under heavy overload conditions. The arc image of the Ag-Mg-Ni contact was recorded using a double-axis arc photographing platform, and the moving track of the arc center under overload conditions was drawn. This paper explored the patterns of arc center movement on the contact surface and the effects of the arc on the surface roughness of the contacts by analyzing the probabilities of the arc center appearing in various locations. A mathematical model correlating the number of contact cycles with contact resistance was established. Subsequently, a finite element simulation model for the equivalent heat source of the contact was developed. The theoretical model error was less than 10%. The accuracy of the equivalent heat source model was verified by comparing the measured data with the simulation results.

Investigation of Switching Characteristics of Contact Materials for Inductive Load

Research on Silver Tin Oxide Materials for Power Relays

Design And Analysis Of A Switched Reluctance Motor With High Temperature Superconducting Windings

Design of A Novel Hybrid Non-Contacted Switch

Characterisation of surface morphology of high voltage DC relay contacts under arc erosion

Equivalent Heat Source Model of Thermal Relay Contact Based on Surface Roughness of Silver–Magnesium–Nickel Contact

Intermittent Failure Mechanism and Stabilization of Microscale Electrical Contact

Torque Analytical Model of Switched Reluctance Motor Considering Magnetic Saturation

Failure Analysis of Arc Ablated Tungsten-Copper Electrical Contacts

Analysis And Improve Of Electromagnet Mechanism For Integrated Control And Protective Switching Devices

Application of Amorphous and Nanocrystalline Soft Magnetic Materials in Balanced-Force-Type Electromagnetic Relay

The Analysis of the Thermal Processes Occurring in the Contacts of Vacuum Switches During the Conduction of Short-Circuit Currents

Study on the Reliability of Capacitive Shunt RF MEMS Switch

Research on a Novel Drive Unit of Fast Mechanical Switch with Modular Double Capacitors

Investigation of vacuum arc ignition characteristics and erosion morphology microstructure characteristics of CuCr55 electrode contact materials

Material performance analysis and structure design of the A.C. contactor driven by MSMA

DC Hot Switching Lifetime Study for Contact MEMS Switch by Weibull Distribution Analysis

Research of simulation and experiment on arc characteristics of gas mechanical switch

The Corrosion Behavior of Different Silver Plating Layers as Electrical Contact Materials in Sulfur-Containing Environments

Analysis of the characteristics of gas insulated, multiple-stage, high voltage switches

Study of microstructural evolution during operation of electrically connected components and analysis of failure mechanism