Abstract:Zinc oxide (ZnO) varistors, which are produced by sintering ZnO powder together with small additives of Bi2O3, Co3O4, Sb2O3 and other oxides, are popular ceramic semiconductor devices and widely used in electric circuits and systems as voltage-clamping or surge-arrester owing to their extremely nonlinear current–voltage characteristics. The reliability of ZnO varistors is the most important consideration, and researches are mainly focus on the material properties of ZnO body and the effects of additives, such as ZnO grain size and the surrounding additive-rich insulating barriers. However, the manufacturing of electrodes still remains the traditional silver baking process, and few people investigate the effects of electrodes on the reliability of devices. In this paper, we propose a novel electrodes manufacture process using magnetron sputtering technology, and investigate the reliability of devices comparing to silver baking process. Two groups of samples with diameters of 20mm were prepared by silver baking and magnetron sputtering process respectively. The nonlinear voltage, nonlinear coefficient, and leakage current parameters were measured by the metal oxide varistor meter typed TTK-168; the energy absorption capacities were measured by a lightning current surge generator with 8/20μs impulse waves; the adhesive strength of electrodes was measured by a dynamometer; the microstructures of the samples were examined using Scanning Electron Microscope, and the change ratio of nonlinear voltages at an environment of 125°C after 100h was chosen as the main reliability parameter. Results show that the sputtered electrodes could improve the reliability of samples by reducing the change ratio from 1.32% to 0.61%, with other parameters exceeding the silver baking samples at the same time. This enhancement is benefit from the good interface between sputtered electrodes and ZnO substrate as well as the low temperature during magnetron sputtering process.

Research on Silver Tin Oxide Materials for Power Relays

Design of Power Supply for Relay Testing Instrument Based on Micro-computer

Reliability enhancement of zinc oxide varistors using sputtered silver electrodes.

Anti-Arc Erosion Properties of Ag-La2Sn2O7/SnO2 Contacts

Equivalent Heat Source Model of Thermal Relay Contact Based on Surface Roughness of Silver–Magnesium–Nickel Contact

Characterisation of surface morphology of high voltage DC relay contacts under arc erosion

A New Silver-Based Graded Composite As Electrical Contact Material

Application of Amorphous and Nanocrystalline Soft Magnetic Materials in Balanced-Force-Type Electromagnetic Relay

The Corrosion Behavior of Different Silver Plating Layers as Electrical Contact Materials in Sulfur-Containing Environments

Research on thermal design control and optimization of relay protection and automation equipment

Preparation of Cubic Zinc Stannate Nanopowder and Its Application in Silver-Based Electrical Contact Material

Improving Mechanical and Electrical Contact Performance of Silver Based Electrical Contact Material Reinforced by Flower Spherical Zinc Oxide Loaded with Silver Nanoparticles

The research and application on interfacing technology between Electronic Current Transformer and relay protection

Investigation of the properties of reed switches in devices for resource-saving relay protection of the electrical part of power plants

Research on Arc Erosion Products on Silver-metal Oxide Contacts Materials

Preparation and Arcing Characteristics of Ag/SnO2 Electrical Contacts

Research on the influence and test of core components on relay protection device

Research Progress in AgSnO2 Electrical Contact Materials

Review of the recent Chinese research on the electrical properties of CuCr contacts for vacuum interrupters

A Risk Assessment for Utilities to Prevent Transformer OLTC Failures Caused by Silver Sulphide Corrosion

Ag-92SnO(2)In(2)O(3) Electrical Contacts Fabricated by In-Situ Oxidation Process