Abstract:The transformer is the most important element in the electrical power systems and it’s expected that the service life to be between 35 and 40 years. The principal problems occurred are related to the defects and the degradation of the insulating oil. In fact, under service conditions, the electrical and thermal stresses or chemical contaminants affect the insulation oil. As a consequence of ageing, the transformer oil deteriorates gradually and becomes increasingly contaminated which reduce its service life. In this work, the efficiency of transformer oils was assessed through a detailed study of the dielectric properties of mineral insulating oil, specifically focusing on breakdown voltage under various experimental conditions. This involved precisely inserting two standardized semi-elliptical steel electrodes into the oil and conducting a meticulous analysis by varying the distance between two electrodes and adjusting the oil temperature The results of these experiments demonstrate a notable increase in breakdown voltage as the distance between electrodes and the temperature of the oil increase. Specifically, at an electrode gap of 5 mm, the mineral oil exhibited a breakdown voltage of 6.2 kV, significantly lower than the expected 31 kV, indicating considerable impurity contamination. These experimental findings prompted the application of Fourier transform infrared spectroscopy (FTIR) to delve deeper into the molecular composition of the oils. FTIR analysis revealed the presence of carbon dioxide (CO2) in the oil, a clear indicator of hydrocarbon oxidation due to dissolved oxygen (O2). This oxidation process primarily occurs through the reaction of oxygen with hydrocarbons present in the oil. At elevated temperatures, this reaction intensifies, leading to the formation of various degradation products, including CO2. The presence of oxygen in the oil was identified as a critical factor contributing to reduced breakdown voltage, thereby accelerating the degradation process of transformer oils. Where these detailed insights contribute significantly to our understanding of the dielectric properties of mineral oil, offering valuable perspectives for optimizing the performance and reliability of electrical transformers while mitigating the risk of operational failure.

A Risk Assessment for Utilities to Prevent Transformer OLTC Failures Caused by Silver Sulphide Corrosion

Development of a New Method for the Assessment of Mineral Insulating Oil Corrosivity Against Silver

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

Causes of transformer failures and diagnostic methods – A review

A Review Study of Condition Monitoring and Maintenance Approaches for Diagnosis Corrosive Sulphur Deposition in Oil-Filled Electrical Transformers

Research on the standard test and measuring method for corrosive sulfur in transformer oils

A research summary of corrosive sulfur in mineral oils

Fault Diagnosis and Analysis of a 110 Kv Transformer

Influences of Corrosive Sulfur on Copper Wires and Oil-Paper Insulation in Transformers

Effects of Electric Fields on Copper Sulfide Deposition and the Properties of Insulating Oils in Oil-Immersed Transformers

Probe into a fault cause of 220kV current transformer

Chemical Sensing Strategies for Real-Time Monitoring of Transformer Oil: A Review

Research on Gas Protection Misoperation Mechanism and Strategy in Switching Process of On-Load Tap Changer for Large Capacity Transformer

Electrical breakdown voltage measurement in a contaminated transformers oil and thermal performance evaluation

Analysis of a 110kV Transformer Near-Area Short-Circuit Fault Resulting in Winding Deformation and Management Measures

Analysis of Abnormal Detection Data of Dissolved Gases in 500kV Transformer Oil

Influence of corrosive sulfur in transformer oil on the copper wire and oil immersed insulation paper

Power Transformer Condition Assessment Strategy Using Matter Element Analysis

Limitations and Performance of Pressure Relief Devices in On-Load Tap Changer Compartments Under Arcing Faults

Corrosion Mechanisms for Electrical Fields Leading to the Acceleration of Copper Sulfide Deposition on Insulation Windings

Mechanical Fault Diagnostics of Power Transformer On-Load Tap Changers Using Dynamic Time Warping