Abstract:In order to explore the impact of the type and content of the modified components on the preparation process, microstructure, microhardness, temperature rise and electrical life of the modified Ag/SnO2In2O3 contact materials, the modified AgSnIn alloys were synthesized by medium-frequency smelting and casting process, and then the corresponding Ag/SnO2In2O3 contact materials were prepared by internal oxidation method. The AC-4 electrical life type testing platform was used to evaluate the temperature rise and electrical life performance of the materials. The results show that the optimum parameters of internal oxidation process of the modified Ag/SnO2In2O3 materials are 700 degree celsius/5 MPa/48 h. Compared with the binary modification of Ni, Cu or Zn, there exists larger micro-strain in the Ni-Cu-Zn ternary modified AgSn In alloys, and the microhardness of the corresponding modified Ag/SnO2In2O3 material increases first and then decreases sharply with indium content decreasing. The modified AgSn In alloy, composed of 0.47wt%Ni, 0.4wt%Cu, 0.43wt%Zn and 2.1wt%In, could achieve complete internal oxidation. The corresponding modified Ag/SnO2In2O3 material presents the optimum microhardness (1382.49 MPa), the longest cycle number (28989 operations) and an appropriate temperature rise (43.69 K), which is attributed to some larger micro-strain (1.9x10-4)-4 ) and grain boundary structure with strengthening effect. The comparison analysis reveals a positive correlation has been established between the electric life cycle number and the microhardness of the modified Ag/SnO2 2 material within In element content range from 2.1wt% to 3.1wt%, which provides a new idea for the formulation design and electric life performance prediction of the Ag/SnO2 2 contact material.

A New Silver-Based Graded Composite As Electrical Contact Material

Optimization of Cyanide-Free Composite Electrodeposition Based on π-π Interactions Preparation of Silver-Graphene Composite Coatings for Electrical Contact Materials

Anti-Arc Erosion Properties of Ag-La2Sn2O7/SnO2 Contacts

A novel process for fabricating electrical contact SnO 2 /Ag composites by reciprocating extrusion

Preparation of Cubic Zinc Stannate Nanopowder and Its Application in Silver-Based Electrical Contact Material

Improving Mechanical and Electrical Contact Performance of Silver Based Electrical Contact Material Reinforced by Flower Spherical Zinc Oxide Loaded with Silver Nanoparticles

Preparation and Arcing Characteristics of Ag/SnO2 Electrical Contacts

Electrical Properties of In Situ Synthesized Ag-Graphene/Ni Composites

State of the art and prospects in sliver- and copper-matrix composite electrical contact materials

Study on the Mechanical Alloying Process for Preparing Ag/LSCO Electrical Contact Material

Preparation and Properties of Bi Doped AgSnO2(12) Electrical Contact Materials

Graphene-enhanced silver composites for electrical contacts: a review

Preparation and Electrical Life Performance of Multi-component Modified Ag/SnO2 Electrical Contact Materials by Internal Oxidation Method

Ag-92SnO(2)In(2)O(3) Electrical Contacts Fabricated by In-Situ Oxidation Process

Electrical Performance of Cu Doped AgSnO<sub>2</sub>In<sub>2</sub>O<sub>3</sub> Electrical Contacts Fabricated by Internal Oxidation

A Novel Method for the Preparation of Ag/SnO2 Electrical Contact Materials

Designed bimetallic layer-encapsulated tungsten powders for reinforcing tungsten-silver matrix composite electrical contact materials

First-Principles and Experimental Study of Ge, V, Ta-Doped AgNi Electrical Contact Materials

Investigation of the Microstructure and Electrical Performance of Ag/SnO 2 In 2 O 3 Contacts with Nickel Addition Fabricated by Internal Oxidation

Sol-gel Preparation of Ag-silica Nanocomposite with High Electrical Conductivity

Research Progress in AgSnO2 Electrical Contact Materials