Abstract:A recent National Academy study recommended a next-step sustained high-power density (SHPD) facility for the United States that can be a bridge to a compact fusion pilot plant. A design has been initiated to investigate a possible SHPD non-deuterium-tritium device that builds upon recent low aspect ratio tokamak studies. A 1.2-m device with a 2.4 aspect ratio has been chosen to evaluate physics performance goals within a double-null plasma machine arrangement centered on three component features: high current density toroidal field (TF) and central ohmic heating/poloidal field (PF) coils, liquid metal divertor/first wall systems, and the integration of a limited set of outboard dual-coolant lead lithium test blankets that can be maintained within a vertical maintenance approach.The underlying initiative of the U.S. program is to promote research and technology advancements that lead to the construction of a compact pilot plant that produces electricity from fusion at the lowest possible capital cost. High-field, higher power density will bring down the size of a fusion device and can lower the cost, but this can only occur with the development of high-current density TF and PF windings, a support system to handle the higher magnetic loads, and a cost structure that is economically viable. High-temperature superconductors (HTSs) offer the potential to meet high-field/high-current requirements and is under development by a number of institutions. Fabrication process improvement would continue to bring down the price if a market for fusion devices were to develop and the production level of HTS cable were to increase; however, this is not happening with any expedience especially related to fusion applications. At present, HTS conductors are an order of magnitude more expensive than low-temperature superconductors (LTSs), making an early application for a near-term SHPD experimental device problematic, especially for a low aspect ratio design that has minimum component space within the device inboard region. In lieu of an HTS-based, high-current density TF winding design, a moderately high-current density winding design (>80 MA/m2) based on cable-in-conduit LTS conductors in a multiwinding pack arrangement sized for low and high field was defined. This paper focuses on the design of the magnet system, with attention given to the analysis performed on the SHPD TF casing structure. The analysis is carried out for various sections: (1) Emag analysis of the SHPD structure, (2) TF casing winding pack evaluation for TF-TF self-load only with slit model and three-dimensional geometry, (3) effect of the shear pin in the TF casing structure, and (4) compression ring effect on the SHPD structure.

Prototype Development of Pulsed Power Supply for HT-6M Tokamak

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Overview of Experimental Results on the HL-2A Tokamak

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

A 100 Ka-Class Modular Power Supply for Tokamak Magnets

Concept Design and Analysis of the Magnet System of the Sustained High Power Density Tokamak Facility

Design of a 30MJ Capacitor-Based Pulsed Power Supply for Eml

High-voltage power supply for ECRH system on J-TEXT Tokamak

Development of high-precision DC power supply prototype for HEPS-TF

Research on a Novel Hybrid Power Supply Scheme with Energy Storage Technology for Tokamak

Design of Compact High-Voltage Capacitor Charging Power Supply for Pulsed Power Application

Full Scale Prototype Research and Development of the Iter Pf Converter Unit

Design and implementation of a versatile H-bridge power supply for experiments on the STOR-M Tokamak

Parameter Analysis and Optimized Configuration of the PFU for Inductive Storage Systems

A high power charging power supply for capacitor in pulsed power system

Development And Properties Of A 500kj Pulsed Power Supply

Design and Platform Testing of the Compact Torus Central Fueling Device for the EAST Tokamak

Research and Development of the High-Power High-Current Polodial Field Converter Module

Effects of vacuum magnetic field region on the compact torus trajectory in a tokamak plasma

Prototype of repetitive pulsed power supply for the RCS beam extraction kicker in the CSNS upgrade

Development of a compact torus injector system for central fuelling technology of EAST