Abstract:A new lower tungsten divertor has been developed and installed in the EAST superconducting tokamak to replace the previous graphite divertor with power handling capability increasing from <2 MW m−2 to ∼10 MW m−2, aiming at achieving long-pulse H-mode operations in a full metal wall environment with the steady-state divertor heat flux of ∼10 MW m−2. A new divertor concept, ‘corner slot’ (CS) divertor, has been employed. By using the ‘corner effect’, a strongly dissipative divertor with the local buildup of high neutral pressure near the corner can be achieved, so that stable detachment can be maintained across the entire outer target plate with a relatively lower impurity seeding rate, at a separatrix density compatible with advanced steady-state core scenarios. These are essential for achieving efficient current drive with low-hybrid waves, a low core impurity concentration and thus a low loop voltage for fully non-inductive long-pulse operations. Compared with the highly closed small-angle-slot divertor in DIII-D, the new divertor in EAST exhibits the following merits: (1) a much simpler geometry with integral cassette body structure, combining vertical and horizontal target plates, which are more suitable for actively water-cooled W/Cu plasma facing components, facilitating installation precision control for minimizing surface misalignment, achieving high engineering reliability and lowering the capital cost as well; (2) it has much greater flexibility in magnetic configurations, allowing for the position of the outer strike point on either vertical or horizontal target plates to accommodate a relatively wide triangularity range, δ l = 0.4–0.6, thus enabling to explore various advanced scenarios. A water-cooled copper in-vessel coil has been installed under the dome. Five supersonic molecular beam injection systems have been mounted in the divertor to achieve faster and more precise feedback control of the gas injection rate. Furthermore, this new divertor allows for double null divertor operation and slowly sweeping the outer strike point across the horizontal and vertical target plates to spread the heat flux for long-pulse operations. Preliminary experimental results demonstrate the ‘corner effect’ and are in good agreement with simulations using SOLPS-ITER code including drifts. The EAST new divertor provides a test-bed for the closed divertor concept to achieve steady-state detachment operation at high power. Next step, a more closed divertor, ‘sharp-cornered slot’ divertor, building upon the current CS divertor concept, has been proposed as a candidate for the EAST upper divertor upgrade.

Development of a compact torus injector system for central fuelling technology of EAST

Design and Platform Testing of the Compact Torus Central Fueling Device for the EAST Tokamak

Conceptual design of 5 MW-NBI injector for HL-2 M tokamak

Observation of the toroidal rotation in a new designed compact torus system for EAST

Development of a Compact Torus Injection System for the Keda Torus Experiment

Theory and Simulation of the Force-Free Equilibria in the EAST-CTI

Preliminary Compact Torus Injection Experiments on the Keda Torus Experiment Reversed Field Pinch

Investigation of the Compact Torus Plasma Motion in the KTX-CTI Device Based on Circuit Analyses

Fully Active Cooled In-vessel Components of EAST Tokamak

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

Physics Design of New Lower Tungsten Divertor for Long-Pulse High-Power Operations in EAST

Power Supply System of EAST Superconducting Tokamak

Design and Test Results for the Pf Power Supply System of East

Control System of High-Voltage Pulse Power Supply for Compact Torus Injector Based on EPICS

Recent EAST Experimental Results and Systems Upgrade in Support of Long-Pulse Steady-State Plasma Operation

Advances in the Long-Pulse Steady-State High Beta H-mode Scenario with Active Controls of Divertor Heat and Particle Fluxes in EAST

Vacuum-Ultraviolet spectrometer system for impurity emission measurement on a Compact Torus Injection System of EAST

Development of a real-time impedance matching system for ion cyclotron resonance heating in experimental advanced superconducting tokamak

The injector design for STCF in China

EAST Ion Cyclotron Resonance Heating System for Long Pulse Operation

Development of a Wide-Range Neutron Flux Monitoring System in EAST