Abstract:We are developing a 30MJ high power pulsed power supply (PPS) system with 10kV operation voltage for eMl research. The PPS system can be divided into several functional subsystems: pulse forming subsystem, control subsystem, charging subsystem, and measurement subsystem. Matrix type structure and modular architecture are adopted in the design of the PPS. The PPS is assembled in two 40' general purpose containers and a primary energy cabin in order to meet the requirements of field experiments and transportation. The pulse forming subsystem consists of 30 parallel pulse power modules (PPMs). Each module includes three 334kJ pulse forming units (PFUs) in parallel. The control subsystem has a two-level control structure. The primary level control device is a remote master controller and the second level is a pulse power module controller. The charging subsystem is composed of 30 high voltage capacity charging power supplies (CCPSs) and a primary energy unit (PEU). The PEU includes 30 lithium iron phosphate group (LIPG), each LIPG power supplied one CCPS. And the core component of CCPS is a series resonance converter based on IGBT bridges. The measurement subsystem adopts a PXI bus based data collection system and a master-slave network structure with optical fiber synchronous communication. With electrical parameters of the PPS and railgun being assumed, numerical studies of the railgun launch process have been down with Matlab/Simulink platform. Through thermal management simulation, the pulse components cooled by air nature can realized continuous discharging 5 times, each time interval of 6 seconds. It is benefits by the pulsed components development and progress. At present, 2 PFU and 1 CCPS have been built and debugged successfully. The 30MJ PPS is expected to be built soon after and will be used for EML research.

Control System of High-Voltage Pulse Power Supply for Compact Torus Injector Based on EPICS

High-voltage power supply for ECRH system on J-TEXT Tokamak

Development of Control System in Compact Single Stage Electrostatic Accelerator

Control Design of a Modular Current Source Power Conditioning System for High Temperature SMES

Development of a compact torus injector system for central fuelling technology of EAST

Investigation of the Compact Torus Plasma Motion in the KTX-CTI Device Based on Circuit Analyses

Development of a Compact Torus Injection System for the Keda Torus Experiment

Design of RF Power System for CPHS

Design of a 30MJ Capacitor-Based Pulsed Power Supply for Eml

The Central Control System for KTX

Preliminary Compact Torus Injection Experiments on the Keda Torus Experiment Reversed Field Pinch

Design of Compact High-Voltage Capacitor Charging Power Supply for Pulsed Power Application

Cryomodule Control System of Injector Ⅱfor Accelerator Driven Sub-critical System

Design of a Feedback Control System for Keda Torus Experiment Equilibrium Field Power Supply

Control System for RF-driven Negative Ion Source Experimental Setup at HUST

Design and Control of the Accelerator Grid Power Supply-Conversion System Applied to CFETR N-NBI Prototype

Control and timing system design of cphs *

Design and Platform Testing of the Compact Torus Central Fueling Device for the EAST Tokamak

Modeling and Analysis of the Inverter Type High Voltage Power Supply with Duty Cycle Modulation

EPICS Based Computer Control System for ERL Accelerator

Real-time MHD feedback control system in Keda Torus eXperiment