Abstract:We are developing a 30MJ high power pulsed power supply (PPS) system with 10kV operation voltage for eMl research. The PPS system can be divided into several functional subsystems: pulse forming subsystem, control subsystem, charging subsystem, and measurement subsystem. Matrix type structure and modular architecture are adopted in the design of the PPS. The PPS is assembled in two 40' general purpose containers and a primary energy cabin in order to meet the requirements of field experiments and transportation. The pulse forming subsystem consists of 30 parallel pulse power modules (PPMs). Each module includes three 334kJ pulse forming units (PFUs) in parallel. The control subsystem has a two-level control structure. The primary level control device is a remote master controller and the second level is a pulse power module controller. The charging subsystem is composed of 30 high voltage capacity charging power supplies (CCPSs) and a primary energy unit (PEU). The PEU includes 30 lithium iron phosphate group (LIPG), each LIPG power supplied one CCPS. And the core component of CCPS is a series resonance converter based on IGBT bridges. The measurement subsystem adopts a PXI bus based data collection system and a master-slave network structure with optical fiber synchronous communication. With electrical parameters of the PPS and railgun being assumed, numerical studies of the railgun launch process have been down with Matlab/Simulink platform. Through thermal management simulation, the pulse components cooled by air nature can realized continuous discharging 5 times, each time interval of 6 seconds. It is benefits by the pulsed components development and progress. At present, 2 PFU and 1 CCPS have been built and debugged successfully. The 30MJ PPS is expected to be built soon after and will be used for EML research.

Development And Properties Of A 500kj Pulsed Power Supply

Development of Electropulsing Treatment Device Based on Capacitor Energy Storage and Discharge

Design of a 30MJ Capacitor-Based Pulsed Power Supply for Eml

Design of Compact High-Voltage Capacitor Charging Power Supply for Pulsed Power Application

Development of a Heavy Duty Pulsed Power Generator with Ten Spark Gap Switches

Investigation on a Novel Multiple-Switch Pulsed Power Technology

A Repetitive Pulser with Four Spark Gap Switches

Design, Construction, and Testing of an 80-kJ and 2.4-MJ/m<SUP>3</SUP> Inductive Pulsed Power Module for Electromagnetic Launchers

Evaluation of Pulsed Power Sources for Plasma Generation

Pulse-Width-Modulated Plasma Sound Source

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Measurement of electromagnetic radiation dissipation in pulse power supply discharging

Inductive Pulsed Power Supply Consisting of Superconducting Pulsed Power Transformers with Marx Generator Methodology

Overview of Circuit Topologies for Inductive Pulsed Power Supplies

Parameter Optimization and Experimental Test of 4-Mj/m³ IPPS Module

Preliminary Experiments on 0.1 TW Pulsed Power Generator

A high power charging power supply for capacitor in pulsed power system

Conceptual Design and Comparison for 100-Kj Inductive Pulse Power Supplies

Development and Testing of Variable Pulsewidth High-Voltage Generator for Generating High-Intense Electron Beam

Parameter Analysis and Optimized Configuration of the PFU for Inductive Storage Systems

A pulsed power generator for x-pinch experiments