Abstract:The energy density of the inductive energy storage systems is one order of magnitude higher than that of the capacitive ones. The STRETCH meat grinder with ICCOS put forward by Tsinghua University is a typical inductive pulsed power supply for electromagnetic launch system, which has remarkable current amplification ability as a single module. But one module can not provide enough amplitude and width for the load current of the railgun launching. So the collaborative work of multiple inductive source modules is necessary. In this paper the designed inductive power supply system of about 1MJ is composed of 40 STRETCH meat grinder with ICCOS modules. All the main switches are opened simultaneously to reduce the magnetic field coupling among the modules and make the current rising edge steep. The modules are divided into groups. The triggering delays of the thyristors between every two adjacent groups are carefully designed. After the first period triggers for all the modules, the energy stored on the capacitors can be further utilized with the second period triggers. The numerical analysis and the simulation results show that the appropriate collaborative triggering delay can increase the adjustability of the output current width and the second period triggers can further increased the current width and increase the system efficiency. So the load current with flat shape, appropriate amplitude, and longer duration can be provided with modular design and collaborate triggering discharge of multiple modules. This can provide a theoretical foundation for the future study and implementation.

Parameter Analysis and Optimized Configuration of the PFU for Inductive Storage Systems

The Meat Grinder With CPFU: A Novel Circuit for Inductive Pulsed Power Supplies

Conceptual Design and Comparison for 100-Kj Inductive Pulse Power Supplies

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.

A Method of Resonant Frequency Optimized Selection for a SP Inductive Coupled Power Transfer System

Analysis of the Capacitor-Aided Meat Grinder Circuits for an Inductive Pulsed Power Supply

Comparisons of Three Inductive Pulse Power Supplies

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

Circuit Topology of A New Inductive Storage Pulsed-Power Supply to Drive Railgun

An Inductive-capacitive Hybrid Pulsed-power Supply for Electromagnetic Launch

Discussion on Topologies of Quick Response IPPS Suitable for Closed-Loop Control of EML

Inductive Pulsed Power Supply Consisting of Superconducting Pulsed Power Transformers with Marx Generator Methodology

Study on the Collaborative Triggering of Multiple Stretch Meat Grinder with Iccos Modules

Structural parameters optimization for the inductors used in the inductive pulse power supply

Inductance Calculation And Energy Density Optimization Of The Tightly Coupled Inductors Used In Inductive Pulsed Power Supplies

XRAM Generator with Strongly Coupled Inductors and Design of 100 Kilojoules Module

Research on the Temperature Rise and Cooling Methods of Inductor in Inductive Pulsed Power Supply

A Review of the Current Research Situation of Inductive Pulsed-Power Supplies for Electromagnetic Launch

Design of Compact High-Voltage Capacitor Charging Power Supply for Pulsed Power Application

Meat Grinder with ACC Circuit: A Novel Circuit for Inductive Pulsed Power Supplies