Abstract:By applying the principle of inverse current commutation with semiconductor (ICCOS) devices in a slow transfer of energy through capacitive hybrid (STRETCH) meat grinder system, a novel circuit topology called STRETCH meat grinder with ICCOS was proposed by the Tsinghua University in 2013. It can not only raise the amplitude of the opening current, but also reduce the cost of the STRETCH meat grinder circuit obviously by replacing the integrated gate-commutated thyristor (IGCT) with thyristor. This paper discusses the overall design, system implementation, and testing results of a STRETCH meat grinder with ICCOS system with roughly 1-kJ inductive energy. The load is a spiral coil with 1.4- $\text{m}\Omega $ resistance and 1.4- $\mu \text{H}$ inductance. With closed-loop control strategy, the system detects the charging current of the inductors. When it reaches the designated value, the triggering signal for ICCOS is delivered and after the predefined delay time, the triggering signal for discharging the voltage on the pulse-forming capacitor is delivered. The current of the inductors and the load are measured by Rogowski coils. The opening current is 1 kA and the maximum load current is close to 4 kA. All the voltages on the switches are lower than 1 kV. The experimental results are consistent with the simulated ones, which verified the correctness of the theoretical analysis and proved the applicability of the STRETCH meat grinder with ICCOS for larger energy level.

Analysis of the Capacitor-Aided Meat Grinder Circuits for an Inductive Pulsed Power Supply

The Meat Grinder With CPFU: A Novel Circuit for Inductive Pulsed Power Supplies

Analysis and Research on a Mega-Hz-level Super High Frequency Induction Heating Power Supply Converter

Meat Grinder with ACC Circuit: A Novel Circuit for Inductive Pulsed Power Supplies

Review of the Meat Grinder Circuits for Railguns

An Inductive-capacitive Hybrid Pulsed-power Supply for Electromagnetic Launch

Approaches for Rapid Calculation of the High-Order Meat Grinder Circuit Process in IPPS Systems

Parameter Analysis of the Energy Transfer Capacitor in the Meat Grinder with SECT Circuit

Discussion of Countercurrent Circuit for STRETCH Meat Grinder with ICCOS

Improvement of self-oscillation circuit by single-tube induction heating

Discussion on Topologies of Quick Response IPPS Suitable for Closed-Loop Control of EML

Steady-State Analysis of the Inductively Coupled Power Transfer System

Parameter Analysis and Optimized Configuration of the PFU for Inductive Storage Systems

Research on 50 kJ meat grinder with SECT inductive pulsed power supply

The relationship between inductor paramrters and performances of the stretch meat grinder pulse power supply

The Meat Grinder With SECT Circuit

System Implementation and Testing of the STRETCH Meat Grinder With ICCOS

Research on the Temperature Rise and Cooling Methods of Inductor in Inductive Pulsed Power Supply

Determining Key Parameters for the STRETCH Meat Grinder Circuit

Semi-analytical analysis on system parameters of inductive pulsed power supply